Transcription of How to Serial Shell into a JACE - victordistcontrols.com
1 How to Serial Shell into a jace 1) Put jumper to Serial Shell with the power off 2) Start Hyperterminal 3) Give name to connection ( jace ) 4) Select Com Port (2 or 3) 5) Speed to 115200 6) 8/NONE/1/Hardware then click OK 7) Cycle power while connected to hyperterminal 8) Enter username: tridium 9) Enter password: niagara 10) Choose (2) update network settings 11) Hostname: Whatever you want. No spaces. 12) Domain: Leave blank or put 13) Primary DNS Server: (8 or 9) (that is ours) 14) Secondary - leave blank 15) Route: Gateway 16) IP Address: Physical IP address assigned to jace Ethernet adapter number 1 17) Move jumper back to normal Additional Information Ping Host - Can be used to ping mail server Telnet - Can be used to access the hyperterminal from a remote jace .
2 Can do the exact thing at a distance as you can do locally Update Platform Account - Reset Username & password on the jace if you are unable to get the old username & password If you enable the second port, they have to be on completely different subnets
