Dimming Module with EcoSystem - Lutron Electronics

1 PowPak Dimming Module Energi TriPak Series Wireless Lighting Control 369427j 1 PowPak Dimming Module with EcoSystem . The PowPak Dimming Module with EcoSystem is a radio frequency (RF) control that operates up to 32 EcoSystem Ballasts / LED drivers based on input from Pico controls and Radio Powr SavrTM sensors. Con gurable for multiple zones in a single area, the Dimming Module with EcoSystem is ideal for small areas such as classrooms, conference rooms, and private of ces. Communication with RF input devices, such as Pico.

2 Controls and Radio Powr SavrTM sensors, is accomplished using Lutron Clear Connect RF Technology. RMJ-ECO32-DV-B model shown Features Controls up to 32 EcoSystem uorescent Dimming ballasts and LED drivers Various operating voltages available refer to model number chart below for details on voltage requirements Receives input from up to nine Pico controls, six Radio Powr SavrTM occupancy/vacancy sensors, and one Radio Powr SavrTM daylight sensor Utilizes Lutron Clear Connect RF Technology refer to model number chart below for frequency band data Mounts to a style junction box through a standard size knockout Models Available Model Number Region Operating Voltage Frequency Band RMJ-ECO32-DV-B , Canada, Mexico 120 / 277 V~ MHz URMJ-ECO32-DVB (BAA Compliant)

3 120 / 277 V~ MHz RMQ-ECO32-DV-B Hong Kong, Macau 220 240 V~ MHz RMM-ECO32-DV-B China, Singapore 220 240 V~ MHz RMK-ECO32-DV-B Europe, 220 240 V~ MHz RMN-ECO32-DV-B India 220 240 V~ MHz RMP-ECO32-JA-B Japan 100 V~ MHz RMP-ECO32-200-JA Japan 200 V~ MHz NOTE: Contact Lutron for frequency band compatibility for your geographic region if it is not indicated above. S P E C I F I C AT I O N S U B M I T TA L Page 1. Job Name: Model Numbers: Job Number: PowPak Dimming Module Energi TriPak Series Wireless Lighting Control 369427j 2 Speci cations Regulatory Approvals Default Operation Associated wireless input devices control all RMJ- & URMJ- models only connected EcoSystem LED drivers UL Listed ( ).

4 Occupancy Sensors: FCC approved. Complies with the limits for a Class B. Occupied: 100%; Unoccupied: 0% (OFF). device, pursuant to Part 15 of the FCC rules. ( ). Pico Controls: CSA and IC (Canada) (RMJ- Only). On: 100%; Favorite Level: 50%; Off: 0% (OFF). COFETEL (Mexico) (RMJ- Only). Daylight Sensor: Decreases electric light in response NOM (Mexico) (RMJ- Only). to additional available daylight Complies with requirements for use in other spaces used for environmental air (plenums) per Environment NEC 2014 (C)(3) Ambient operating temperature: 32 F to 104 F.

5 Listed in accordance to CAN/ULC with (0 C to 40 C). a Flame Spread Rating of 0 and a Smoke Developed 0 to 90% humidity, non-condensing Classification of 40, with a minimum spacing of 6 ft For indoor use only ( m) off center EcoSystem Link RMN- Model WPC Type Approved (India) 18 V- 125 mA. RMK- Model Communicates with up to 32 EcoSystem Dimming CE (European Union) ballasts, LED drivers and interfaces such as TRA Type Approved (United Arab Emirates) CJ-BMJ-16A ( only). EcoSystem Digital Link can be wired Class 1 or Power Class 2 for maximum wiring exibility (RMJ-, URMJ-, Operating voltage: RMM-, RMN-, RMQ- models).

6 RMJ-/URMJ- models 120/277 V~ 50/60 Hz 40 mA EcoSystem Digital Link carries basic isolation from RMQ-, RMM-, RMK-, RMN- models line voltage wires (RMK- model). 220-240 V~ 50/60 Hz 40 mA Terminals accept 18 AWG to 16 AWG ( mm2 to RMP- models 100 V~ 50/60 Hz 40 mA mm2) solid wire Typical system power consumption (12 ballasts): W NOTE: Must use Rapid Start sockets with Full system power consumption (32 ballasts): W EcoSystemR ballasts. System Communication NOTE: The PowPak Dimming Module with EcoSystem does NOT support the C5-XPJ-16A.

7 Operates using Clear Connect RF Technology for switching Module . reliable wireless communication; refer to model number NOTE: Wired sensors connected to EcoSystem . chart on page 1 for frequency band details devices are NOT supported. RF range is 30 ft (9 m) for RMJ-, URMJ-, RMQ-, RMM-, RMK-, RMN- models RF range is 23 ft (7 m) for RMP- models Contact Lutron rst for applications using foil-backed or metallic ceiling tiles. S P E C I F I C AT I O N S U B M I T TA L Page 2. Job Name: Model Numbers: Job Number: PowPak Dimming Module Energi TriPak Series Wireless Lighting Control 369427j 3 Speci cations (continued).

8 Key Design Features LED status indicators show communication status and provide programming feedback Power failure memory: If power is interrupted, connected loads will return to the previous level prior to interruption EcoSystem link miswire protection up to 347 V~. Daylight override: Pressing the raise button on an associated Pico control will temporarily override daylighting for the xtures in that Pico group Daylighting will be re-enabled for that Pico group when one of the following occurs: Two hours have passed since the override.

9 *. ON, OFF or Preset button has been pressed on a Pico control controlling that group. All associated Occupancy Sensors have reported unoccupied. * Each time a daylighting override occurs for any Pico . group, the two hour timer is reset. S P E C I F I C AT I O N S U B M I T TA L Page 3. Job Name: Model Numbers: Job Number: PowPak Dimming Module Energi TriPak Series Wireless Lighting Control 369427j 4 Dimensions Dimensions are shown as: in (mm). 1/2 in or 21 mm trade size knockout opening (100) (87). (72) (32). Range Diagrams RMJ-, URMJ-, RMQ-, RMM-, RMK-, RMN- models RMP- models PowPak PowPak.

10 Dimming Module Dimming Module Install in center of room to Install in center of room to maximize RF coverage. maximize RF coverage. Radio Powr Savr Radio Powr Savr . Occupancy Sensor Occupancy Sensor 30 ft (9 m). 30 ft (9 m). Test Test 30 ft (9 m) 23 ft (7 m). Maximum Maximum Pico Pico . Wireless Wireless Transmitter Transmitter 40 ft (12 m) 40 ft (12 m). All Wireless Transmitters must be installed within All Wireless Transmitters must be installed within 30 ft (9 m) of the PowPakTM Module . 23 ft (7 m) of the PowPakTM Module .