Search results with tag "Lutron"
Diva 010 l Wll l - Lutron Electronics Company Inc
www.lutron.com5 For 3-way switching, use Claro switches or other mechanical switches. 6 A Lutron power pack (PP-DV or PP-347H) is required for switching ballasts and drivers. For Lutron power pack specification, please see Lutron P/N 369544 at www.lutron.com 7 24 V- single-pole double-throw (SPDT) switch, supplied by others, must be rated for dry contacts.
Phase-Adaptive Power Module SPEC (369835)
www.lutron.com• Lutron in-wall neutral wire dimmers; see approved list in the Dimmers and Switches Specification Guide (Lutron P/N 3671746) at www.lutron.com (see Lighting Load Interfaces section) • GRAFIK Eye QS control units * • LP, LCP, and GP dimming panels ** • HomeWorks QS remote power panels ** • HomeWorks QS in-line dimmer
PowPak Wireless Fixture Control - Lutron Electronics, Inc.
www.lutron.comFCJ-010 0-10V Control Module FCJ-ECO EcoSystem Control Module FC-Sensor Occupancy/Daylight Sensor FC-VSensor Vacancy/Daylight Sensor www.lutron.com Lutron Electronics Co., Inc. 7200 Suter Road Coopersburg, PA 18036-1299
RadioRA 2 - Lutron Electronics Company Inc
www.lutron.com“Away” scene from the car, via the Lutron Connect app. This scene turns specified lights on to dim levels for security and others off, and lowers shades, as the homeowner drives away. Control the system from anywhere… C S E Lutron’s mobile applications for Android TM and iOS devices provide convenient and intuitive control of the
GRAFIK Eye QS Control Unit Quick Installation and ...
www.lutron.comGRAFIK Eye QS control unit. The GRAFIK Eye QS control unit supplies 3 Power Draw Units (PDUs) on the QS link. Refer to the QS Link Power Draw Units specification submittal (Lutron P/N 369405) at www.lutron.com for more information concerning PDUs. 1234 12 ABC 123456LN A: CCI SIG Example: Emergency lighting interface (maximum 1) Note: The GRAFIK ...
Radio Powr Savr Wireless Occupancy / Vacancy Cenilig Sensor
www.lutron.com• Sensor setup is available as a service by Lutron. For more information see the Sensor Layout and Tuning service document (Lutron P/N 3601235). Sensor Placement • To detect motion, the sensor requires line-of-sight of room occupants. The sensor must have an unobstructed view of the room. DO NOT mount behind or near tall
SPECIFICATION DATA APERTURE 75 UP | 25 DN (APxxA)
fluxwerx.comLutron Hi-Lume 1% EcoSystem (LDE1) Lutron Hi-Lume 1% 2-Wire 120 V (LTEA) M 3 120–277 V 347 V 5 03 06 12 25 ≤ 3 ft ≤ 6 ft ≤ 12 ft ≤ 25 ft 3 Specify run length in 2' nominal increments. Important: Row lengths cannot be modified on site (factory installed endcaps & joiners). 4 Integrated driver with mounting, power feed, suspension ...
Clear Connect RF Technology - Lutron Electronics …
www.lutron.comtopologies, industry standards for wireless products, and practical field issues will also be discussed. The company’s exhaustive research and unwillingness to compromise on performance led to our leadership in the wireless lighting control market. The following pages present the Lutron perspective on the science of wireless light control.
Caséta Wireless Motion Sensor - Lutron Electronics, Inc.
www.lutron.comInstallation Overview Sensor Setup • For more information, please see the Caséta Motion Sensor Quick-Start Guide (P/N 0301931) at www.lutron.com. Sensor Placement • The mounting height of the sensor should be between 6 ft and 8 ft (1.6 m and 2.4 m). • For smaller rooms, detection may be improved by placing
Pico Wireless Control English - Lutron Electronics …
www.lutron.com1. Ce guide d’installation fournit des instructions de configuration simples pour les systèmes Maestro Wireless et Caséta Wireless seulement. Si vous utilisez votre commande sans fil Pico avec un autre système Lutron, veuillez vous reporter au guide de configuration du système.
Seem
www.focalpointlights.comdimming functionality, occupancy sensing, and multi-zone daylight harvesting working with Quantum ®, Energi Savr Node™, and Energi TriPak using EcoSystem® communication protocol. Lutron Hi-Lume EcoSystem - 1% Dimming (LH1) Lutron Model #LDE1 A two-way digital network that enables on/off and dimming functionality, occupancy sensing, and
Lumea C L Dimmer - Lutron Electronics Company Inc
www.lutron.comTM Technology: Advanced Lutron ... 0 W + 600 W 500 W 400 W 1 W – 25 W + 500 W 400 W 300 W 26 W – 50 W + 400 W 300 W 200 W 51 W – 75 W + 300 W 200 W 100 W ... 60 Hz Lighting Load Line/ Hot Black Dimmer Red Red/White Green Neutral 120 V~ 60 Hz Lighting Load 3-Way Switch OR Dimmer Line Side
CATALOG # PROJECT NOTES - FLUXWERX
fluxwerx.comLutron Hi-Lume 1% EcoSystem (LDE1) Lutron Hi-Lume 1% 2-Wire 120 V (LTEA) M 3 120–277 V 347 V 5 03 06 12 25 ≤ 3 ft 10 ≤ 6 ft ≤ 12 ft ≤ 25 ft 3 Specify run length in 2' nominal increments. 4 Important: Row lengths cannot be modified on site (factory installed endcaps & joiners). Integrated driver with 10 mounting, power feed, suspension ...
Automated Shades Residential Consumer Brochure
www.lutron.comWith Lutron, you have the power to do that. The press of one button can shape the lighting in a space to create the perfect atmosphere for any activity. The Lutron difference Roller shades Palladiom roller shades Roller shade fabrics Drapery track system Horizontal sheer blinds Wood blinds Honeycomb shades Kirbé vertical drapery Roman shading ...
Sivoia QS Smart Panel Power Supply - Lutron Electronics …
www.lutron.com• May be surface mounted or recess mounted at a location within allowable distance to powered devices, limited by wire gauge used; see the section titled: Wiring Rules With cover All knockouts: ∅ 7/8 in (22 mm) Bottom Side 10.88 in (276 mm) 18.00 in (457 mm) 4.16 in (106 mm) Without cover Rear 10.38 in (264 mm) 17.50 in (445 mm) 9.50 in ...
Maestro 0-10V dimmer sensor - Lutron Electronics …
www.lutron.comMaestro 0-10V dimmer sensor Keywords: Maestro 0-10V dimmer sensor, Maestro in-wall sensors, occupancy/vacancy sensors, 0-10V control, MS-Z101, XCT sensing technology, smart ambient light detection, tamper-resistant lens, Created Date: 9/26/2014 11:00:47 AM
0 –10V Single room solutions - Lutron Electronics Company …
www.lutron.comIndividual fixture dimming, sensing, personal control, and daylight harvesting PowPak wireless fixture controller with 0-10 V control • Adds wireless control to each individual 0 –10 V LED or fluorescent fixture in a space • Enables combined occupancy detection and daylight harvesting at the individual fixture level Models/Price
048480 Maestro Occupancy/Vacancy Sensor CL Dimmer …
www.lutron.com6 Application Note #480 ® www.lutron.com Dimming Features in Advanced Programming Mode1 The Maestro ® Sensor Dimmer has features that allow the user to change aspects of the dimming functionality. The features include: Preset Light Level • Set the light level that the lights turn ON to after a single press of the T button. • Lock your preset to save your setting when …
Maestro PRO LED+ Dimmer - Lutron Electronics Company Inc
www.lutron.comReverse MLV Transformer with Halogen4,5,6, 10 W 400 VA (300 W) ... Wiring Diagrams Single-Pole Wiring Line / Hot Neutral Black Brass Dimmer Blue Green Lighting Load 120 V~ ... Wiring Diagrams (continued) Dimmer Line Side Dimmer Load Side 4-Way Wiring (Using MA-R or MSC-AD Companion Dimmer)
Application Note #587 - Lutron Electronics Company Inc
www.lutron.comwireless 120-277 0-10 V 1 6 Auto sink / source Linear Yes Vive Maestro RF 0-10V sensor dimmer (MRF2S-8SD010) Clear Connect wireless ... This standard is usually only used with legacy devices because the DMX standard has become the mostcommonly used control standard within the theatrical world. Figure 2: Control as Source
Power Draw Units (PDUs) on the QS Link
www.lutron.comQS Network Interface -2 5.26 3.75 4.26 2.50 1.06 QS DMX Interface -2 QS Sensor Module (QSM), not including attached wired sensors (see Sensors and Control Devices that Consume PDUs on the following page for more information)-3 500-13538 Rev.A QSE-CI-AP-D +1.800.523.9466 www.lutron.com Programming Interface 3/8 in (8,5 mm) 5 in-lbs
Vive Wireless Hub - Lutron Electronics Company Inc
www.lutron.comwireless Clear Connect technology. • Distributed system architecture. – Wireless sensors and controls must be located within 60 ft (18 m) line of sight, or 30 ft (9 m) through walls, of the associated device. • Supports timeclock events based on both sunrise and sunset or fixed time-of-day. • Timeclock events can control individual devices,
DIN Panels and Accessories - Lutron Electronics Company Inc
www.lutron.comnon-condensing. Indoor use only. Door is required if LQSE-4A-D/LQSE-4A5-230-D module is used and calibration point exceeds 70 °C (158 °F). See optional accessories for door models. Cooling Passive cooling Line-Voltage Connections Use copper wire only. In a feed-through panel, DIN rail-mounted terminal blocks
Maestro LED+ Dimmer - Lutron Electronics Company Inc
www.lutron.comswitch applications. 2 "XX Color codes, see section “Colors and Finishes” on the next page. 3 For clamshell packaging add "H" after "153M". Not available in BR or GR. 4 For 3-way and 4-way dimming, use Maestro companion dimmers. 5 Clamshell packaged product for Canada. Not available in BR or GR. 6 Clamshell packaged product. Not available ...
Vive PowPak Fixture Controls - Lutron Electronics Company …
www.lutron.comFCJS-ECO-EM4 Emergency PowPak wireless fixture control for EcoSystem ballasts and drivers PowPak Wireless Fixture Control 1 Lights do not turn on automatically with a vacancy sensor. A Pico remote control is needed to turn on the lights. 2 For a bulk pack of 8 pieces, order FCJS-010-BULK8. 3 For a bulk pack of 8 pieces, order FCJS-ECO-BULK8.
Pico wireless English - Lutron Electronics Company Inc
www.lutron.comwill move to the default level(s) and/or position(s) for this button. Wait until the lights and shades/draperies stop dimming and moving. 2. Adjust each dimmer, switch and shade/drapery assigned to that column as follows: a. Dimmers - use the …
RadioRA 2 Repeaters - Lutron Electronics Company Inc
www.lutron.comb. HUB or switch (only if static IP addresses are being used) c. After PC programming is complete, direct Ethernet connection without a router, HUB, or switch (only if static IP addresses are being used) 3 Auxiliary repeaters and main repeaters on the same subnet can be optionally connected by RS485 wired links when the repeater
QS Link Power Supply SPEC (369886) - Lutron Electronics …
www.lutron.com• The device must be mounted horizontally (connection terminal blocks on top). DIN Rail Mounting: Snap onto DIN rail. To remove, pull out tabs with screwdriver and lift off. Surface Mounting: Pull out tabs with screwdriver. Screw through tabs to secure. 103298_en_02 PHOENIX CONTACT 8 L(+) N(–) 100 – 277 V Input / Entrada / Entrée 24 V
Wiring and Power Guidelines - Lutron Electronics Company …
www.lutron.comanother Hybrid Repeater (wireless), or wired to the RF Link on another Hybrid Repeater. Each Hybrid Repeater can be powered by the RF link on the processor (24VDC) or by a 9VDC plug-in transformer. The three main power and wiring options are: 1. Wired to RF Link for power and communication 2. Wired to RF Link for communication, locally powered 3.
Mirada Medium Wall Sconce (XWM) - lsicorp.com
www.lsicorp.comDIM - 0-10v Dimming leads extended to housing exterior IMSBT1- Integral Bluetooth™ Motion and Photocell Sensor max 8-24’ mounting height 4 IMSBT2- Integral Bluetooth Motion and Photocell Sensor max 25-40’ mounting height 4 Button Type Photocells PCI120 - 120V PCI208-277 - 208 -277V PCI347 - 347V Lutron Limelight Controls
Control type: 0-10V - Lutron Electronics Company Inc
www.lutron.com0-10V is an analog lighting control protocol. Basically, a 0-10V control applies a voltage between 0 and 10 volts DC to produce a varying intensity level. There are actually two existing 0-10V standards. They are not compatible with each other, so it is essential to understand which type is required. The original 0-10V control was used for ...
Motorized Roller Shades - Lutron Electronics Company Inc
www.lutron.com• System allows for a total of 100 QS devices • System allows for a total of 100 QS zones Environment • Temperature: 32° - 104° F (0° - 40° C) • Humidity: 0% - 90%, non-condensing Precision Control • Preset points can be easily programmed at any position between the open and close limits • Shades stop within 1⁄
QSE-IO Control Interface (369374)
www.lutron.com100 devices and 100 zones. Each QSE-IO control interface counts as 1 device and 5 zones. • Each QSE-IO control interface consumes 3 Power Draw Units (PDU) on the QS link. Refer to the QS Link Power Draw Units Specification Submittal (P/N 369405) at www.lutron.com for more information. • The maximum wiring length for the QS link is
Color and Engraving Codes - Lutron Electronics Company Inc
www.lutron.comSelection 1 Open Close Off QSWS2-2BRLN-WH-EGN (Non-insert version) LED QSWS2-2BRLI-WH-E01 (Insert version) Color and Engraving Codes (continued) ... • Use Faceplate Replacement Kits to change color, button configuration, or ...
QSE-CI-NWK-E Control Interface (369373)
www.lutron.comcontrol interface counts as 1 device and 0 zones. • Each QSE-CI-NWK-E control interface consumes 2 Power Draw Units (PDU) on the QS link. Refer to the QS Link Power Draw Units Specification Submittal (P/N 369405) at www.lutron.com for more information. • The maximum wiring length for the QS link is 2000 ft (610 m). Environment
Setup guide - Lutron Electronics Company Inc
www.lutron.comof the desired column until the Light Emitting Diode(s) (LED) begin(s) to flash (approximately 6 seconds). If a keypad column was previously programmed, all of the LEDs in the column will scroll sequentially. If this is the first time a keypad column is programmed, only the top and bottom LEDs will flash alternately. The LED on the Pico
QSE-CI-DMX Control Interface - Lutron Electronics …
www.lutron.com• One QSE-CI-DMX per QS link in QS standalone. Up to 16 QSE-CI-DMX interfaces per QS link in HomeWorks, Athena, or Quantum systems. • 32 DMX channels per QSE-CI-DMX control interface. • Each QSE-CI-DMX control interface consumes 2 Power Draw Units (PDU) on the QS link. Refer to the QS Link Power Draw Units Specification Submittal •
Resi System Comparison - Lutron Electronics Company Inc
www.lutron.comCoverage: RF coverage for up to 5,000 sq. ft. of space, with a 100 device system limit. System topology: Local control. (A local topology is where the actual load control devices are in the living space and are part of the user interface experience. Local topology is …
Sivoia QS / Sivoia QS Wireless Roller 64 Motorized Shade
www.lutron.comLutron Roller 64 shades utilize the ultra-quiet, precision controlled Electronic Drive Unit (EDU). The Sivoia QS EDU is housed inside the roller shade assembly and controls the movement of the shade, keeps track of the shade’s position, and adjusts the shade to the user’s
Dimmer Cross Reference Guide - Leviton
www.leviton.comLutron Caseta Dimmer Decora Smart Wi-Fi® provides easy wireless lighting control with scheduling, remote control, and voice control. The complete product line includes dimmers, switches, smart plugs, fan controls, multi-button keypads, and a Voice Dimmer with Amazon Alexa Built-in. Decora Smart - Caseta Leviton Features No Hub Required
up to 9000 lumens FluxGrid gen 2 2x4 2FGX up to 9000 lumens
www.assets.signify.comMay 20, 2021 · DIM Dimming SDIM Step dimming to 40% input power XDIM 9,10 MarkX phase dimming LDE 5 Lutron LDE5 5% dimming DALI DALI F1 3/8" flex, 3 wire 18 gauge 6' F2 3/8" flex, 4 wire 18 gauge 6' F1/D 3/8" twin flex, 3 wire 18 gauge 6' for dimmable luminaires F2/5W 3/8" single flex, 5 wire 18 gauge 6' for dimmable luminaires
EcoSystem Digital Ballasts - Lutron Electronics Company Inc
www.lutron.comEcoSystem compact ballasts provide high-performance dimming for any compact fluorescent application, including within an EcoSystem Lighting Control System. EcoSystem compact ballasts offer 100% to 5% dimming, providing both energy savings and lighting flexibility. Features • Continuous, flicker-free dimming from 100% to 5%
QS Sensor Module Features - Lutron Electronics Company Inc
www.lutron.comdaylight sensor (up to 10 per QSM) Pico wireless control (up to 10 per QSM) 1 Up to 4 wired inputs total (of any type). 2 Up to 16 wired daylight sensors total per EcoSystem link. Radio Powr Savr occupancy / vacancy sensor Vive wireless receptacle QSM (Connected to Quantum, GRAFIK Eye QS, or ESN standalone) A single Radio Powr Savr
Lutron Keypad Brochure
www.lutron.com2 Lutron lutron.com/europe lutron.com/europe Lutron 3 Architectural seeTouch Keypad Architectural-style keypads feature beveled edges and precise corners.
Lutron Connect Bridge
www.lutron.comto activate the Lutron Connect Bridge into the system. Ensure convenient access to the “Add” button because it will be used for activating the Bridge into the system and pairing with the Lutron Connect App. 4. Use the Lutron Connect App to control and monitor the system through the Lutron Connect Bridge. The “Add”
Lutron Connect Bridge SPEC (369975) - Lutron Electronics, Inc.
www.lutron.comPower Failure Power failure memory: should power be interrupted, the Lutron Connect Bridge will return to its previous state and reconnect to the Lutron system and cloud services when power is restored. Connections Ethernet: 3 ft (0.92 m) cable included for internet and Lutron Connect Bridge connection
Lutron Integration Protocol GUIDE (040249)
www.lutron.comLutron integration protocol About Integration Integration Operations The Lutron integration protocol will allow third-party equipment, such as touch-screens, universal remote controls, and software applications, to control and monitor devices in a Lutron lighting control system . The protocol supports three basic types of integration operations:
Lutron Roller 100 - Lutron Electronics Company Inc
www.lutron.comLutron Sivoia QS Roller 100 Chassis Specification 086106b 9 05.11.17 Coupled Systems Up to six (6)* shade panels can be coupled, powered by a single electronic drive unit (EDU). • Increased efficiency by operating multiple shades with one EDU • 1.5 in (38 mm) minimum light gap between panels • Bottom bars of coupled shades
Lutron Smart Bridge and Smart Bridge Pro Spec Submittal ...
www.lutron.comRegulatory Approvals • cULus Listed • FCC approved. Complies with the limits of a Class B digital device, pursuant to Part 15 of the FCC rules • IC certified • COFETEL certified Power • 5 V- 300 mA • Power Supply (included): 5 V- 550 mA, cable length 6 ft (1.83 m) Typical Power Consumption • Lutron Smart Bridge: 1.3 W
Lutron Residential and Commercial Systems Rules
www.lutron.com• Supports up to 16 zones of control per loop. • Quantum Vue allows control of individual addresses. Interface Rules • DMX interface supports 32 output DMX channels. Up to 16 DMX interfaces per QS link. – 1 Quantum zone = 1 channel for intensity (value of 1–100) OR 3 channels for RGB control (value of 1–100) OR 1 channel for integration
Similar queries
Lutron Electronics Company Inc, Switches, Phase-Adaptive Power Module, Dimmers, Lighting, Control, Lutron Electronics, 10V Control, RadioRA 2, Lutron Connect app, Lutron, GRAFIK Eye QS Control Unit Quick Installation and, GRAFIK Eye QS, GRAFIK, Tuning, Clear Connect RF Technology, Industry, Science, Installation, Pico Wireless Control, Instructions, Dimming, Consumer Brochure, Roller, Mounted, Dimmer sensor, Lutron Electronics Company, Fixture, PowPak wireless fixture, Wireless control, Sensor, Reverse, Wiring Diagrams, Wiring, Side, Wireless, Interface, DMX Interface, Vive Wireless Hub, Architecture, Condensing, Maestro LED+ Dimmer, Switch, Maestro, Move, Only, Connection terminal blocks, Screw, Repeater, Control type: 0-10V, Motorized Roller Shades, QSE-IO control interface, Color, Selection, Control interface, Guide, Light Emitting Diode, QSE-CI-DMX control interface, User, Sivoia QS / Sivoia QS Wireless Roller 64, Lutron Roller, Dimmer Cross Reference Guide, Leviton, EcoSystem Digital Ballasts, High, Free, QS Sensor Module, Daylight sensor, Daylight, Keypad Brochure, Lutron Connect Bridge, Cable, Lutron integration protocol, Protocol, Lutron Roller 100, Shades, Lutron Smart Bridge and Smart Bridge Pro Spec Submittal, Approvals, Lutron Residential and Commercial Systems Rules, Zone, RGB control