Adhesion promoters

PRODUCT DATA SHEET Sikaflex® PRO-3

Adhesion tests on project specific substrates must be performed and procedures agreed with all parties be-fore full project application. Note: Primers and activators are adhesion promoters and not an alternative to improve poor preparation / cleaning of the joint surface. Primers also improve the long-term adhesion performance of the sealed joint.

  Sikaflex, Adhesion, Promoter, Adhesion promoter

Photolithography - Wake Forest University

• Adhesion promoters are used to assist resist coating. • Resist adhesion factors: – moisture content on surface – wetting characteristics of resist – type of primer – delay in exposure and prebake – resist chemistry – surface smoothness – stress from coating process – surface contamination • Ideally want no H 2

  Adhesion, Promoter, Adhesion promoter, Photolithography

PRODUCT DATA SHEET Sikaflex® PRO

Note: Primers are adhesion promoters. They are neither a substitute for the correct cleaning of a sur-face, nor do they improve the strength of the surface significantly. APPLICATION METHOD / TOOLS Sikaflex® PRO is supplied ready to use. After the necessary substrate preparation, insert a suitable backing rod to the required depth and apply

  Sikaflex, Adhesion, 174 pro, Promoter, Adhesion promoter

FRP Inspection Guide

Reichhold, Inc P. O. Box 13582 Research Triangle Park, NC27709-3582 Tel :(800)448-3482