F1554
Found 7 free book(s)y. Fasteners With Similar Strengths
polycrew.comASTM F1554 Gr 105 ≥1/2, ≤3 in 105 ksi 125-150 ksi (na) 15 45 ASTM F1554 COMMENTS: This is an anchor bolt specification. F1554 will sometimes be requested in threaded rod. These Grades can be made into threaded rod, but, it is not very common. Often when F1554 Grade 36 threaded rod is requested, ASTM A307 Grade A is offered.
Standard Specification for Anchor Bolts, Steel, 36, 55, and ...
www.3ppars.comDesignation: F1554 − 15´1 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength1 This standard is issued under the fixed designation F1554; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision.
HILTI TECHNICAL BULLETIN
www.hilti.comMar 04, 2018 · f1554 gr. 55 a307 a193 b7 astm f593 cw (316/304) 898 5.8 astm astm f1554 gr. 55 astm a307 a193 b7 astm f593 cw (316/304) 1/4 1,175 940 - 970 2,025 1,620 605 485 - 500 1,040 835 (5.2) (4.2) - (4.3) (9.0) (7.2) (2.7) (2.2) - (2.2) (4.6) (3.7) 5/16 1,835 1,470 - 1,520 3,160 2,530 945 755 - 780 1,630 1,300 ...
A review of the concepts behind anchoring columns, as ...
www.aisc.orgASTM F1554 is the usual material for anchor rods, and Grade 36 has the widest availability. Grades 55 and 105 are used when there is uplift or large moments. It is good practice to verify the availability of base plate and anchor rod materials with the structural
Anchor Rods - AISC
www.aisc.orgSpecify ASTM F1554 anchor rods This standard covers anchor rods with yield strengths of 36, 55, and 105-ksi, in hooked, headed, and threaded/nutted options. 2 Assuming that all material are available It is possible that materials of different types and sizes will not be readily available for your project. Contact a local fabricator for availability
pl LRFD ASD - Structural Engineering Software
www.asdipsoft.comF1554-36 (4) Rods , fya = 36.0 ksi, futa = 58.0 ksi 1" diam. x 16.0 in emb. Concrete Is Cracked at Service Load Level Tension Analysis (kip) Total Tension Force N ..... Tension Force per Rod Ni .... Anchor Reinf: Use 2 Bars #5 per Rod 15.4 7.7 kip kip Failure Mode Ω Nn N / Nn/Ω Steel Strength Nsa Rebars Strength Nrg Conc. Breakout Ncbg
Simpson Strong-Tie SET-XP High-Strength Epoxy Adhesive
www.buildsite.comC-A-2018 2018 SIMPSON STRONG-TIE COMPANY INC. 30 Adhesive Anchors SD Simpson Strong-Tie ® Anchoring, Fastening and Restoration Systems for Concrete and Masonry * See p. 13 for an explanation of the load table icons. SET-XP® Design Information — Concrete SET-XP Installation Information and Additional Data IBC * for Threaded Rod and Rebar in Normal …