Means Of Egress Osha Standard

TRENCHING & SHORING GUIDELINES - TAMUC

Adequate means of egress will be maintained at all times. Excavations located near public traffic shall be barricaded and employees shall be ... sloped according to the procedures and requirements set forth in OSHA's Excavation standard, 29 CFR 1926.650, .651, and .652.

  Name, Standards, Osha, Means of egress, Egress

29 CFR 1926 Safety and Health Regulations for Construction

§1926.34 Means of egress. §1926.35 Employee emergency action plans. ... If a particular standard is specifically applicable to a condition, practice, means, method, operation, or process, it shall prevail over any different general standard …

  Name, Standards, Means of egress, Egress

O S H A CHECKLIST FOR GENERAL INDUSTRY

6. Are means of egress continually maintained f ree of all obstructions or impediments? 1910.37(k)(2) 7. Are devices or alarms installed to restrict the improper use of an exit, designed and installed so that they cannot impede emergency use of such exit? 1910.37(a)(3) 8. Do all exit routes meet the minimum height and width requirements at all ...

  Name, Means of egress, Egress, O s h a

SAFETY HEALTH MANUAL

2. Set a high standard for safety and health practices and lead by example. 3. Ensure that the needed financial, material and personnel resources are provided to achieve the goals and objective of the safety and health program. 4. Ensure that the program is fully implemented and effective.

  Standards

EM385-1-1 (30NOV14) UFGS 103526 11/15 Activity Hazard ...

Competent Person – OSHA 30-Hour Construction Training All vehicles/equipment shall be inspected on a scheduled maintenance program in accordance with EM 385 1-1 section 18-2. All faulty equipment must be tagged and removed from the job site immediately. All hand tools that require electricity must be double insulated.

  Osha

Safety and Health Audit Checklist - Cornell University

Safety and Health Audit Checklist: Directions ii • Do the best you can to answer the questions in each section. • If you don't understand the question or don't know the answer, just put a question mark or other mark next to the question. • If a whole section does not apply (e.g., you don’t have that type of equipment) just mark it out with a slash.