Mounting considerations for power semiconductors
Found 3 free book(s)Protecting semiconductors with high speed fuses
www.eaton.comconsiderations for selecting rated voltage, rated current and similar data for protecting power semiconductors. Guidelines for fuse mounting is covered, with explanations on how to read and understand product data sheets and drawings. This document is not a complete guide for protecting all power semiconductor applications.
MMA8451Q, 3-axis, 14-bit/8-bit digital accelerometer ... - NXP
www.nxp.comNXP Semiconductors N.V. 5 MMA8451Q The device power is supplied through VDD line. Power supply decoupling capacitors (100 nF ceramic plus 4.7 µF bulk, or a single 4.7 µF ceramic) should be placed as near as possible to the pins 1 and 14 of the device. The control signals SCL, SDA, and SA0 are not tolerant of voltages more than VDDIO + 0.3 V.
1769-L20, 1769-L30 CompactLogix™ Controllers
literature.rockwellautomation.comEach I/O bank requires its own power supply. Only one controller can be used in a CompactLogix system. A 1769-ECR (right end cap) or 1769-ECL (left end cap) is required to terminate the end of the communication bus. 1 DIN rail latch 8 Channel 0 RS-232 Port 2 panel mounting tab 9 Channel 0 default communication push button