Mounting Magnets Mounting
Found 3 free book(s)
AN885, Brushless DC (BLDC) Motor Fundamentals
electrathonoftampabay.orgtion. To simplify the process of mounting the Hall sensors onto the stator, some motors may have the Hall sensor magnets on the rotor, in addition to the main rotor magnets. These are a scaled down replica version of the rotor. Therefore, whenever the rotor rotates, the Hall sensor magnets give the same effect as the main mag-nets.
REACTOR™ 40 FOR SMARTPUMP and a heat gun • Marine …
static.garmin.comSuitable mounting locations should not be within 60 cm (2 ft.) of the following: • Iron • Magnets • High-current wires • Intermittently-running pumps, such as head pumps and live well pumps A large magnet, such as a subwoofer-speaker magnet, should be no closer than 1.5 m (5 ft.) to any of the mounting locations.
Direct Drive Analog Control Servo Valves D633 and D634
www.moog.comMounting pattern ISO 4401-03-03-0-05 (with or without leakage oil connection Y) ... permanent magnets (1) supply part of the motor’s force. In combination with the force created by the coil (5), the force level of a Linear Force Motor is higher than that of a