Selection Guide Gripping Force

Selection Guide (Gripping Force) - Intelligent Actuator

Selection Guide (Gripping Force) Selection Guide (Gripping Force) Keep the distance (L, H) from the finger (claw) mounting surface to the gripping point within the following range. If such distance does not fall within such range, excessive moment applies to the finger sliding parts and internal mechanism and the service life may be affected.

  Guide, Selection, Force, Selection guide, Gripping force, Gripping

Parallel Type Air Gripper

A gripping force of 24 N is obtained from the intersection point of gripping point distance L = 30 mm and pressure of 0.4 MPa. • The gripping force is 24.5 times greater than the workpiece mass, and therefore satisfies a gripping force setting value of 20 times or more. Step 1 Confirmation of Gripping Force Model Selection Illustration ...

  Selection, Force, Gripping force, Gripping

ILO Glossary of Statistical Terms

Quick Guide on Sources and Uses of Labour Statistics . Business register – see Establishment register ... The sample size and sample selection methods for both outlets and the goods and services for which ... • gripping/holding difficulties (e.g., using fingers to g rip or handle objects)

  Guide, Selection, Gripping

A Guide to Selecting Non-Powered Hand Tools

Awkward postures may cause you to use more force. Select a tool that can be used within the space available. For example, if you work in a cramped area and high force is required, select a tool that is held with a power grip. A pinch grip will produce much less power than a power grip. Exerting force with a pinch grip means you will work harder ...

  Guide, Force

810 Hand and Power Tool Safety - OSHAcademy

This study guide is designed to be reviewed off-line as a tool for preparation to successfully complete OSHAcademy Course ###. Read each module, answer the quiz questions, and submit the quiz questions online through the course webpage. You can print the post-quiz response screen which will contain the correct answers to the questions.

  Guide

POP Blind Riveting Systems

POP ® The POP ® rivet installation sequence is simple. 1. Place the mandrel of the POP ® rivet into the nosepiece of the setting tool. 2. Insert the POP ® rivet body through the hole of the materials to be fastened. 3. Pull the trigger of the setting tool. The POP ® Rivet body clamps the materials together and expands to form a secondary head on the blind side of the joint.