Example: dental hygienist
Topcoat
Found 2 free book(s)
TECHNICAL DATA SHEET - PPG AEROSPACE
www.ppgaerospace.comStir the topcoat slowly during the application. The suggested film thickness is 50 to 100 microns (2.0 to 4.0 mils). For gloss and semi-gloss topcoats this can be accomplished by two or three medium coats with a 50% overlap. With the flat and gunship/matte coatings it may be
FY-22CH-1 21FEB2021
www.navsea.navy.miltopcoat; for materials to be installed in all other areas, they must be blasted and coated at a maximum 85 percent relative humidity; this requirement supersedes Notes (26) and (29A). 3.1.4.1 For tanks, when masking is removed from the open ends of piping, the piping may retain tightly-adherent paint or remain bare up to 6 inches above the open