Search results with tag "Ansi b16"
FLANGE DIMENSIONS EN1092-1 - Global Supply Line
globalsupplyline.com.au• Flanges - blind, weld neck, slip on (ANSI B16.5, ANSI B16.47, BS3293) ANSI 150 to 2500 class and API6A 2,000 to 20,000 PSI • Flanges - orifice, spectacle blinds • Fittings - ANSI buttweld schedule 40 to XXS • Forged steel small diameter screwed & welding fittings 3,000lb, 6,000lb and schedule 40 to XXS
Lap Joint Stub Ends - ANSI B16 - Pipe Fittings & Flanges ...
www.metline-pipefittings.in- Dimension B conforms to ASME/ANSI B16.5, Pipe Flanges and Forged Fittings. - Gasket face finish shall be accordance with ASME/ANSI B16.5 for raised face flanges. - For tolerances see page 6-2. 1 Long pattern weights are listed (short pattern weights are similar to MSS SP-43 lap joint stub ends, page 6-20).
Gestión de Compras
www.gestiondecompras.comThese flanges are manufactured to specifications of ANSI B16.5, ANSI B16.47, ANSI B16.36, BS10 Table D & Table E, BS Table F & Table H, BS Table J & Table K, API-6A/6BX, MSS SP44, DIN 2632-2638, DIN
C4, C44, and C51 Ball Valves for Cryogenic Service
www.flowserve.comEnd Connections: SE – Screwed pipe ends (NPT) (dimensions to ANSI B1.20.1) SW – Socket weld ends (dimensions to ANSI B16.34) SW0 – Socket weld ends for O.D. tubing to ASTM A269 (stainless steel only) BW1 – Butt weld ends for schedule 10 pipe (dimensions to ANSI B16.25) (stainless steel only)
BOLT & STUD DIMENSIONS FOR ANSI FLANGES
www.rhinofitt.co.ukCARBON STEEL PIPE FLANGES TO ANSI B16.5 (BS 1560) FORGINGS TO ASTM A105 - Not recommended for prolonged use above 427qC FORGINGS TO ASTM A350 - LF2 - Not to be used above 343qC-29 to 38 50 100 150 200 250 300 350 375 400 425 450 475 500 525 540 FLANGE ABOVE DN 600 ARE NOT INCLUDED IN ANSI B16.5 AND THE CLASS DESIGNATIONS
STAINLESS STEEL WELDING FITTINGS - CCTF
www.cctf.comASME/ANSI B16.9 Welding Fittings, except short radius ASME/ANSI B16.28 Short Radius Elbows and Returns WELDING BEVEL MSS SP-43 ... Lap-Joint Stub Ends NPS DN Outside Dia. at Welding End Wall Thickness Centre to End A, B, C, M Overall Length F, H, Overall Length E Fillet Radius of Lap R Outside Diameter
PTFE Lined Pipe and Fittings - Piping Designers . com
pipingdesigners.com12” 300 365 191 5 88.0 Steel frame: ASTM A234 grade WPB, in compliance with ANSI B16.28 Steel bend: according to SCH 40. Flange: ASTM A105, in compliance with ANSI B16.5/Class 150lbs; JIS 10K or DIN is also available on request. Standard: two fixed flanges; one loose flange and one fixed flange or two loose flanges are on request.
23 22 13 Steam and Steam Condensate Piping (072913)
www.uh.edu3. Each fitting shall be stamped as specified by ANSI B31.9. G. Flanges: 1. All 150 lb. and 300 lb. ANSI flanges shall be weld neck and shall be domestically manufactured, forged carbon steel, conforming to ANSI B16.5 and ASTM A1-191 Grade I or II or A-105 as made by Tube Turn, Hackney or Ladish Company. Slip on flanges shall not be used.
Slip On Flanges - ANSI B16.5 Class 150lbs - Steel Flange
www.steel-flange.comwww.steel-flange.com sales@steel-flange.com Slip On Flanges - ANSI B16.5 Class 150lbs Notes - Weights are based on manufacturer’s data and are approximate.
DUCTILE IRON FLANGED FITTINGS - Canada Pipe
www.canadapipe.comDUCTILE IRON FLANGED FITTINGS ANSI/AWWA-C110/A21.10 Standard and ANSI B16.1 Class 125 Standard SPECIFICATIONS Flanged fittings shown on the pages immediately following are manufactured to either ANSI/AWWA-C110/
TECHNICAL INFORMATION WEIGHTS & DIMENSIONS
www.spearsmfg.comANSI B16.5 bolt patterns, plus numerous Unions, Saddles, Transition and Specialty fi ttings in a variety of sizes. Exceptional Chemical & Corrosion Resistance Unlike metal, PVC fi ttings and pipe never rust, scale, or pit, and will provide many years of maintenance-free service and extended system life. High Temperature Ratings
API 602 GATE, GLOBE AND CHECK VALVES CATALOG - …
walworth.comWALWORTH offers this product line manufactured in accordance with API-602. and ANSI Classes 800, 1500 and 2500 for socket weld, threaded and combined ends. Also available are Integral Flanges in 150, 300, 600 and 1500 either Raised Face or ring type ... PRESSURE CLASS AS PER API 602 AND ASME/ANSI B16.34 FOR RF OR RTJ ENDS Gate 1/4” to 2 ...
FORGED STEEL FLANGES - CCTF
www.cctf.com• 6 • INCHES MILLIMETRES 1 Socket Welding Flanges, sizes NPS 3 1/2 (DN 90) and larger are not covered by ASME/ANSI B16.5. 2 Includes .06" (1.6 mm) raised face. 3 These dimensions correspond to inside diameters of pipe as given in ANSI/ASME B36.10M for Standard Wall Pipe.Thickness of Standard Wall is the same as Schedule 40 in size NPS 10 (DN 250) and …
PRODUCT CATALOGUE & SPECIFICATION GUIDE - Bremick
new.bremick.com.auB16 101 L7, L7A, L7B, L7C, L70, L71, L72, L73 102 L7M 103 Class 1 - B8, B8M, B8C, B8P, B8F, B8T, B8LN, B8MLN 104 Class 2 - B8M 105 Class 2 - B8, B8C, B8P, B8F, B8T 106 Bolting Details for Pipe Flanges - ANSI B16.5 & BS 3293 107 Temperature & Pressure Ratings for Carbon Steel Flanges 107 Raised Flange Bolting Requirements - PN20, PN50 108
FORGED STEEL FLANGES - GARTH INDUSTRIAL
www.garthindustrial.com• 6 • INCHES MILLIMETRES 1 Socket Welding Flanges, sizes NPS 3 1/2 (DN 90) and larger are not covered by ASME/ANSI B16.5. 2 Includes .06" (1.6 mm) raised face. 3 These dimensions correspond to inside diameters of pipe as given in ANSI/ASME B36.10M for Standard Wall Pipe.Thickness of Standard Wall is the same as Schedule 40 in size NPS 10 (DN 250) and smaller.
Section 4 Flanges - aapindustries.com.au
www.aapindustries.com.auwww.aapindustries.com.au 67 FLANGES [4] Temperature / Pressure Ratings ASTM A105 CARBoN STEEL PIPE FLANGES To ANSI B16.5 (BS.1560) FoRGINGS To ASTM A105 — Not recommended for prolonged use above 427°C FoRGINGS To ASTM A350-LF2 — Not to be
FORGED STEEL FLANGES - CCTF Corporation: Home
www.cctf.com• 6 • INCHES MILLIMETRES 1 Socket Welding Flanges, sizes NPS 3 1/2 (DN 90) and larger are not covered by ASME/ANSI B16.5. 2 Includes .06" (1.6 mm) raised face. 3 These dimensions correspond to inside diameters of pipe as given in
Concentric and Eccentric Reducers
www.pipefittingweb.comConcentric and Eccentric Reducers MSS SP-75 ANSI B16.9 (in mm) * Wellgrow’s standard. Outside Diameter at Bevel Outside Diameter at Bevel
Section 4 Flanges - AAP Industries
www.aapindustries.com.auwww.aapindustries.com.au 67 FLANGES [4] Temperature / Pressure Ratings ASTM A105 CARBON STEEL PIPE FLANGES TO ANSI B16.5 (BS.1560) FORGINGS TO ASTM A105 — Not recommended for prolonged use above 427°C FORGINGS TO ASTM A350-LF2 — Not to be
Face-to-Face and End-to-End Dimensions of Valves
www.valvestest.com5 Class 1500 Steel Flanged and Buttwelding End Valves, Face-to-Face and End-to- ... approved and published as ANSI B16.10-1973. ... the American National Standards Institute on June 7, 2000. In this 2009 Edition, Nonmandatory Appendix A was revised and updated. Also, all affected
PRESSURE/TEMPERATURE RATINGS FOR FLANGES …
www.stewarts-group.compressure/temperature ratings for flanges asme/ansi b16.5-2013 for ref only flange
TEXAS FLANGE
www.texasflange.comANSI B16.5 Class 150 Forged Flanges R O B 2 1/16” T L X B D WELD NECK LAP JOINT THREADED SOCKET WELD SLIP—ON BLIND Nom. Pipe Size O T T J R X #/Dia of Holesa Bolt Circle Dia B B 2 b B 3 H L L 2 L 3 c r D Thr ½ 3.50 0.38 0.44 1.38 1.19 4-0.62 2.38 0.88 0.62 0.90 0.84 0.56 1.81 0.62 0.12 0.38 0.62
Fiberglass Pipe Design M45 - American Water Works …
www.awwa.orgReinforced Thermosetting-Resin) Flanges (Applicable for ½ in. through 24 in. [13 mm through 600 mm] ANSI B16.5 150 lb [70 kg] bolt circle flanges.) ASTM D4161 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe …
Dimensions for Class 300 Flanges - Thermometrics Corp
thermometricscorp.com300 . All dimensions given in inches. Dimensions & tolerances in accordance with ANSI B16.5. Carbon steel flanges mechanical properties and chemistry conform to ASTM A105. Flanges are furnished faced, drilled and spot faced or back faced. *1/16 in. raised face included in dimensions Q, Y and YY. **Bolt hole diameter 1/8 in. larger than bolt ...
Double Block and Bleed with Ultra-Low ... - Parker Hannifin
www.parker.com• 1/2” to 2” N.B. Flanges (15 to 50 DN) • ANSI B16.5 150 to 2500 flange class and API 10,000 • 1/2-14 NPT (female) standard outlet • 1/4-18 NPT (female) standard vent • Variety of optional end connection sizes and thread forms including tube connections 1/2”/12mm diameter • Standard materials of construction: Stainless
PVC & CPVC INJECTION MOLDED CLASS 150 FLANGES
www.spearsmfg.comGlass-filled PVC or CPVC materials may be used in certain Van Stone Style flange rings and large diameter Blind flanges where additional reinforcement is deemed necessary. Conformance Standards Socket & Spigot — ASTM D 2467 (PVC); ASTM F 439 (CPVC), as applicable. Threads — ASTM F 1498. Bolt Hole Pattern — ANSI B16.5; ASTM D 4024.
ANSI B16.5 CLASS 300 FLANGES - Global Supply Line
globalsupplyline.com.auANSI B16.5 CLASS 300 FLANGES Threaded RF Lap Joint RF Size Outside Diam. Bore Diam. Thick-ness Lenght thru Hub Diam. at Base of Hub Holes Radius of Fillet Raised Face
ANSI B16.5 Flanges Catalogue - Offshore Supplies
www.hos.co.ukANSI FLANGES FLANGE / 4 CLASS 150 FLANGES ANSI B 16.5 Forged Flanges Nominal Pipe Size Outside Diam. Diam. at Base of Hub O.D of Raised Face Thickness BORE LENGTH THRU HUB
ANSI B16.5 CLASS 150 FLANGES - Global Supply Line
globalsupplyline.com.auANSI B16.5 CLASS 150 FLANGES Welding Neck RF Socket Welding RF Size Outside Diam. Bore Diam. Thick-ness Total Thick-ness Neck Hub Radius Holes Raised Face Net Base Weight Diam. Thick-ness Thick- ... 600 14 16 18 20 24 533.40 596.90 635.00 698.50 812.80 359.16 410.46 461.77 513.08 615.95 336.55 387.35 438.15 488.95 590.55 359.16 410.46 461.77 ...
ANSI B16.5 CLASS 1500 FLANGES - Global Supply Line
globalsupplyline.com.auANSI B16.5 CLASS 1500 FLANGES Welding Neck RF Socket Welding RF Size Outside Diam. Bore Diameter STD Bore Diameter XS Thick-ness Socket Depth ... WELDING NECK RF STD* DIMENSIONS (mm) SOCKET WELDING RF (STD* and XS*) DIMENSIONS (mm) Size Outside Diam. Bore ... 150 200 250 300 350 6 8 10 12 14 393.70 482.60 584.20 673.10 749.30 154.05 …
ANSI B16.5 CLASS 300 FLANGES - Global Supply Line
globalsupplyline.com.auANSI B16.5 CLASS 300 FLANGES Threaded RF Lap Joint RF Size Outside Diam. Bore Diam. Thick-ness Lenght thru Hub Diam. at Base of Hub Holes Radius of Fillet Raised Face
ANSI B16.5 CLASS 150 FLANGES - Global Supply Line
globalsupplyline.com.auANSI B16.5 CLASS 150 FLANGES Welding Neck RF Socket Welding RF Size Outside Diam. Bore Diam. Thick-ness Total Thick-ness Neck Hub Radius Holes Raised Face
ANSI B16.5 CLASS 150 BLIND FLANGES - …
catalog.coastalflange.comAll dimensions are in inches These flanges will be furnished with a 1/16" raised face unless otherwise specified. Nominal Pipe Size Outside Diameter (O) Thickness (T)
ANSI B16.5 CLASS 150 WELDING NECK FLANGES
catalog.coastalflange.comAll dimensions are in inches. These flanges will be furnished with a 1/16" raised face unless otherwise specified. Standard Bore will be furnished unless otherwise specified.
Similar queries
FLANGE DIMENSIONS EN1092-1, Flanges, ANSI B16, ANSI, CLASS, Lap Joint Stub Ends - ANSI B16, Gestión de Compras, C51 Ball Valves for Cryogenic Service, BOLT & STUD DIMENSIONS FOR ANSI FLANGES, Joint Stub Ends, ASTM, ANSI FLANGES, Neck, Slip On Flanges, ANSI B16.5, 150lbs, DUCTILE IRON FLANGED FITTINGS, DUCTILE IRON FLANGED FITTINGS ANSI, API 602, API-602, 1500, PRODUCT CATALOGUE & SPECIFICATION GUIDE, FORGED STEEL FLANGES, Raised face, Concentric and Eccentric Reducers, 5 Class 1500, American National Standards Institute, PRESSURE/TEMPERATURE RATINGS FOR FLANGES, Pressure/temperature ratings for flanges asme, WELD NECK, WELD, American Water Works, Class 300 Flanges, Parker Hannifin, CLASS 150 FLANGES, Blind flanges, ANSI B16.5 CLASS 300 FLANGES, ANSI B16.5 Flanges Catalogue, CLASS 150 FLANGES ANSI B 16, ANSI B16.5 CLASS 150 FLANGES, ANSI B16.5 CLASS 1500 FLANGES, ANSI B16.5 CLASS 1500 FLANGES Welding Neck, WELDING, WELDING NECK, CLASS 150 BLIND FLANGES, 5 CLASS 150 WELDING NECK FLANGES