Example: barber

(2) Self diagnostic codes - allsmart.ru

2PK/2PL/2PM/2PN. (2) self diagnostic codes Remarks code Contents Check procedures Causes /corrective measures 0030 FAX control PWB system error Defective FAX Replace the FAX control PWB (See Processing with the fax software control PWB. page 1-5-48). was disabled due to a hardware problem. 0070 FAX control PWB incompatible Defective fax Install the fax software. detection Error software. Abnormal detection of FAX control Defective FAX Replace the FAX control PWB (See PWB incompatibility In the initial control PWB. page 1-5-48). communication with the FAX control PWB, any normal communication command is not transmitted. 0100 Backup memory device error Defective flash Replace the control PWB (See page 1- memory. 5-37). Defective control Replace the control PWB (See page 1- PWB.)

2PK/2PL/2PM/2PN 1-4-7 (2) Self diagnostic codes Code Contents Remarks Causes Check procedures /corrective measures 0030 FAX control PWB system error Processing with the fax software

Tags:

  Code, Self, Diagnostics, Self diagnostic codes

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of (2) Self diagnostic codes - allsmart.ru

1 2PK/2PL/2PM/2PN. (2) self diagnostic codes Remarks code Contents Check procedures Causes /corrective measures 0030 FAX control PWB system error Defective FAX Replace the FAX control PWB (See Processing with the fax software control PWB. page 1-5-48). was disabled due to a hardware problem. 0070 FAX control PWB incompatible Defective fax Install the fax software. detection Error software. Abnormal detection of FAX control Defective FAX Replace the FAX control PWB (See PWB incompatibility In the initial control PWB. page 1-5-48). communication with the FAX control PWB, any normal communication command is not transmitted. 0100 Backup memory device error Defective flash Replace the control PWB (See page 1- memory. 5-37). Defective control Replace the control PWB (See page 1- PWB.)

2 5-37). 0120 MAC address data error Defective flash Replace the control PWB (See page 1- memory. 5-37). 0130 Backup memory read/write error Defective flash Replace the control PWB (See page 1- memory. 5-37). Defective control Replace the control PWB (See page 1- PWB. 5-37). 0140 Backup memory data error Defective flash Replace the control PWB (See page 1- memory. 5-37). Defective control Replace the control PWB (See page 1- PWB. 5-37). 0150 Control PWB EEPROM error Improper installa- Check the installation of the EEPROM. Detecting control PWB EEPROM tion control PWB (U17) and remedy if necessary (See (U17) communication error. EEPROM (U17). page 1-5-37). Defective control Replace the control PWB (See page 1- PWB. 5-37). Data damage of Contact the Service Administrative Divi- control PWB sion.

3 EEPROM (U17). 0170 Billing counting error Defective control Replace the control PWB (See page 1- PWB. 5-37). Data damage of Contact the Service Administrative Divi- control PWB sion. EEPROM (U17). 1-4-7. 2PK/2PL/2PM/2PN. Remarks code Contents Check procedures Causes /corrective measures 0180 Machine number mismatch The main PWB U004 Setting the machine number Machine number of main and engine or the engine (See page 1-3-12). does not match. PWB were exchanged. Data damage of Contact the Service Administrative Divi- control PWB sion. EEPROM (U17). 0420 Paper feeder communication Improper installa- Follow installation instruction carefully error tion paper again. Communication error between con- feeder. trol PWB and optional paper feeder. Defective har- Reinsert the connector.

4 Also check for ness between continuity within the connector har- control PWB ness. If none, remedy or replace the (YC30) and harness. paper feeder interface connec- tor, or improper connector inser- tion. Defective control Replace the control PWB (See page 1- PWB. 5-37). Defective har- Reinsert the connector. Also check for ness between PF continuity within the connector har- main PWB (YC5) ness. If none, remedy or replace the and paper feeder harness (Refer to the service manual interface connec- for the paper feeder). tor, or improper connector inser- tion. Defective PF Replace the PF main PWB (Refer to the mainPWB. service manual for the paper feeder). 0830 FAX control PWB flash program Defective fax Install the fax software. area checksum error software. A checksum error occurred with the Defective FAX Replace the FAX control PWB (See program of the FAX control PWB.)

5 Control PWB. page 1-5-48). 0840 Faults of RTC Defective control Replace the control PWB (See page 1- The time is judged to go back based PWB. 5-37). on the comparison of the RTC time The battery is Check visually and remedy if necessary. and the current time or five years or disconnected more have passed. from the control PWB. 1-4-8. 2PK/2PL/2PM/2PN. Remarks code Contents Check procedures Causes /corrective measures 0870 FAX control PWB to control PWB Improper installa- Reinstall the FAX control PWB (See high capacity data transfer prob- tion FAX control page 1-5-48). lem PWB. High-capacity data transfer between Defective FAX Replace the FAX control PWB or control the FAX control PWB and the control control PWB or PWB and check for correct operation. PWB of the machine was not nor- control PWB.

6 (See page 1-5-48 or 1-5-37). mally performed even if the data transfer was retried the specified times. 0920 Fax file system error Defective FAX Replace the FAX control PWB (See The backup data is not retained for control PWB. page 1-5-48). file system abnormality of flash memory of the FAX control PWB. 2000 Main motor error Defective har- Reinsert the connector. Also check for The main motor ready input is not ness between continuity within the connector har- given for 2 s during the main motor main motor ness. If none, remedy or replace the is ON. (CN1) and con- harness (See page 1-5-37). trol PWB (YC17), or improper con- nector insertion. Defective drive Check if the rollers and gears rotate transmission sys- smoothly. If not, grease the bushings tem of the main and gears.

7 Check for broken gears and motor. replace if any. Defective main Replace the main motor (See page 1-5- motor. 49). Defective control Replace the control PWB (See page 1- PWB. 5-37). 2610 PF paper feed motor error Defective har- Reinsert the connector. Also check for (paper feeder) ness between PF continuity within the connector har- The PF paper feed motor of cassette paper feed motor ness. If none, remedy or replace the 2 ready input is not given for 2 s dur- and PF main harness (Refer to the service manual ing the PF paper feed motor is ON. PWB (YC4), or for the paper feeder). improper con- nector insertion. Defective PF Check if the gears rotate smoothly. If paper feed motor not, grease the bushings and gears. drive Check for broken gears and replace if transmission any.

8 System. Defective PF Replace the PF main motor. main motor. Defective control Replace the control PWB (See page 1- PWB. 5-37). 1-4-9. 2PK/2PL/2PM/2PN. Remarks code Contents Check procedures Causes /corrective measures 2620 PF paper feed motor error Defective har- Reinsert the connector. Also check for (Paper feeder) ness between PF continuity within the connector har- The PF paper feed motor of cassette paper feed motor ness. If none, remedy or replace the 3 ready input is not given for 2 s dur- and PF main harness (Refer to the service manual ing the PF paper feed motor is ON. PWB (YC4), or for the paper feeder). improper con- nector insertion. Defective PF Check if the gears rotate smoothly. If paper feed motor not, grease the bushings and gears. drive transmis- Check for broken gears and replace if sion system.

9 Any. Defective PF Replace the PF main motor (Refer to main motor. the service manual for the paper feeder). Defective control Replace the control PWB (See page 1- PWB. 5-37). 3100 ISU home position error Defective FFC Replace the image scanner unit (ISU). between CCD (See page 1-5-21). PWB (YC1) and control PWB. (YC8). Defective FFC Reinsert the FFC. Also check for conti- between control nuity within the FFC. If none, remedy or PWB (YC6) and replace the FFC. scanner PWB. (YC103), or improper FFC. insertion. Defective home Replace the home position sensor. position sensor. Defective har- Reinsert the connector. Also check for ness between continuity within the connector har- ISU motor and ness. If none, remedy or replace the scanner PWB harness. (YC104), or improper con- nector insertion.

10 Defective ISU Replace the ISU motor. motor. 1-4-10. 2PK/2PL/2PM/2PN. Remarks code Contents Check procedures Causes /corrective measures 3200 Exposure lamp error Defective FFC Reinsert the FFC. Also check for conti- The exposure lamp is not turned on. between scan- nuity within the FFC. If none, remedy or ner PWB replace the FFC. (YC103) and control PWB. (YC6), or improper FFC. insertion. Defective FFC Replace the image scanner unit (ISU). between CCD (See page 1-5-21). PWB (YC1) and control PWB. (YC8). Defective har- Reinsert the connector. Also check for ness between continuity within the connector har- CCD PWB (YC3) ness. If none, remedy or replace the and LED drive harness. PWB (YC1), or improper con- nector insertion. Defective har- Reinsert the connector. Also check for ness between continuity within the connector har- LED drive PWB ness.


Related search queries