)285 :$// +($'(5 6(5,(6

1 DIMENSIONS: INCHES [MM][MM] IS REF. ONLYNOTES3M IS A TRADEMARK OF 3M TECHNICAL, SALES OR ORDERINGINFORMATION CALL 800-225-5373IN THE EVENT OF CONFLICTBETWEEN THIS DATA AND THATCONTAINED IN THE PRODUCTSPECIFICATION, THE PRODUCTSPECIFICATION TAKES INFORMATION: ROHS COMPLIANT. SEE THE REGULATORY INFORMATION APPENDIX (RIA) IN THE "ROHS COMPLIANCE" SECTION OF FOR COMPLIANCE " X .100" LOW PROFILE, SURFACE MOUNT, STRAIGHT AND RIGHT ANGLE THROUGH-HOLE3M ELECTRONIC MATERIALS SOLUTIONS DIVISION INTERCONNECT SOLUTIONS FOUR-WALL HEADER, 2500 SERIESRPHYSICAL:ELECTRICAL:22 TEMPERATURE RATING: -55C TO 105C PROCESS RATING: 260C, PER J-STD-020C, SINGLE PASSMOISTURE SENSITIVITY LEVEL: 1 (PER J-STD-020C) CURRENT RATING: , 1 CONTACT POWERED , 6 CONTACTS POWERED , ALL CONTACTS POWERED RATING CONDITIONS: EIA-364-070 METHOD 2, 30C MAXIMUM TEMPERATURE RISE, 20% DERATED.

2 REFERENCE APPROPRIATE 3M PRODUCT SPECIFICATION FOR DETAILED CURRENT DERATING CURVES. INSULATION RESISTANCE: >1 X 109 AT 500 VDC WITHSTANDING VOLTAGE: 1,000 VRMS AT SEA LEVELENVIRONMENTAL:2 INSULATOR: MATERIAL: GLASS FILLED POLYESTER (PCT) FLAMMABILITY: UL94V-0 COLOR: BLACK CONTACT: MATERIAL: COPPER ALLOY PLATING:UNDER PLATING: 100" [ ] NICKEL-OVERALL WIPING AREA: AVG. GOLD (SEE ORDERING INFORMATION) SOLDER TAILS: 200" [ ] TIN LEAD OR MATTE TIN (SEE ORDERING INFORMATION) MARKINGS: 3M LOGO, PART IDENTIFICATION NUMBER AND ORIENTATION TRIANGLEUL FILE NO: E68080 NOTCHES A & C WILL ACCOMODATE3M POLARIZING KEY: VERSIONRIGHT ANGLE VERSIONSURFACE MOUNT VERSIONCONTACT TAILS.

3 0245 [.622] WIREWITH .0075 [.191] CORNER RADIIAND .028 [.072] STANDOFFS [.3] CLEARANCE ABOVEBOARD FOR REFLOW SOLDERING.* LOW PROFILE, SPACE SAVING DESIGN.* CENTER SLOT POLARIZATION PREVENTS MIS-INSERTIONS AND REDUCES INSERTION TIME.* DUAL SLOT POLARIZATION MEANS BROADER COMPATIBILITY WITH COMPETITIVE POLARIZATION DESIGNS (NOT AVAILABLE ON 6, 8 OR 10 POSITIONS).* OPTIONAL RETAINER CLIP FOR LOCKING SOCKETS IN PLACE AND INCREASING CONNECTION RELIABILITY IN VIBRATION-PRONE ENVIRONMENTS.* HIGH TEMPERATURE INSULATOR SUITABLE FOR "NO LEAD" SOLDERING OPERATIONS.* THROUGH HOLE VERSION SUITABLE FOR REFLOW SOLDERING USING "PASTE IN HOLE" TECHNIQUES.* EXPOSED SOLDER TAILS (ON RIGHT ANGLE VERSION) PROVIDE EASE OF CLEANING AND REDUCED REPAIR COST.

4 * STRAIGHT SURFACE MOUNT VERSION COPYRIGHTC3M CenterSt. Paul,MN 55144 CHKDDATEAPPVLDATEDRFTDATEMFGDATECHKDDRFT REVECOISSUE DATE AND DESCRIPTIONDRAWING NUMBERREVISIONACCESSCODESDESIGN REFERENCENEXT ASSEMBLYDIVISIONDIVISION CODE TOLERANCESEXCEPT ASNOTEDDO .000 .00 .0 0 .0 .00 .000 ANGLES THIRD ANGLE PROJECTIONINTERPRET PERASME - 2009 MAX SURFACE ROUGHNESSALL SURFACESMARKED ONLYNOYESThis document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights , 4-WALL, LO-PRO, .100 X .100,SMT, STRAIGHT & RA5178-5100-0770-714NN78-5100-0770-72500 SERIESCASTIGLIONEAUG 11,2014 EMSDI nterconnect Solutions2016R.

5 SCHERERSEP 05,2014 REVISED AND REDRAWNM56068 AUG 11,2014 JNCRSREVISE DIM ON SHT2 &CLIP CHART ON SHT5N68908 AUG 02,2016 JNCSC Imaged: 8/5/2016 11:10 AM UTC-05:00 AASECTION "C"(SEE TABLE 1 & NOTE 3).100" X .100" LOW PROFILE, SURFACE MOUNT, STRAIGHT AND RIGHT ANGLE THROUGH-HOLE3 MTM FOUR-WALL HEADER, 2500 SERIESORDERING INFORMATIONSTRAIGHT VERSIONN= HIGH TEMP BLACK (PCT) (RB, UB OR UG PLATING REQ'D)BLANK= (UB OR UG PLATING)PLATING:X25XX-60XX-XXRB = 30" [ ] AVG. GOLD 200" [ ] MATTE TIN (RIA. E1 & C1 APPLY)UG = 15" [ ] AVG. GOLD 200" [ ] 60:40 TIN-LEAD SOLDER TAILS (RIA E3 & C2 APPLY)UB = 30" [ ] AVG. GOLD 200" [ ] 60:40 TIN LEAD SOLDER TAILS (RIA E3 & C2 APPLY)SOLDER TAIL:02 = FOR.

6 062 [ ] THICK BOARD03 = FOR .094 TO .125 [ TO ] THICK BOARDPIN QUANTITY:(SEE TABLE 1)TABLE "A"DIM. "B"POLARIZING [ ].508 [ ] [ ].608 [ ] [ ].708 [ ] [ ].908 [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ]ABCDE64 NOTCH "A"(SEE TABLE 1 & NOTE 3)POSITION "B". "A". HOLE PATTERNPOSITION # HOLE FORPOLARIZATION FROM COMPONENT SIDENOTCH DNOTCH ESOLDER [ ] FOR 02 [ ] FOR 03 COPYRIGHTC3M CenterSt. Paul,MN 55144 CHKDDATEAPPVLDATEDRFTDATEMFGDATECHKDDRFT REVECOISSUE DATE AND DESCRIPTIONDRAWING NUMBERREVISIONACCESSCODESDESIGN REFERENCENEXT ASSEMBLYDIVISIONDIVISION CODE TOLERANCESEXCEPT ASNOTEDDO .000 .00 .0 0.

7 0 .00 .000 ANGLES THIRD ANGLE PROJECTIONINTERPRET PERASME - 2009 MAX SURFACE ROUGHNESSALL SURFACESMARKED ONLYNOYESThis document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights , 4-WALL, LO-PRO, .100 X .100,SMT, STRAIGHT & RA5278-5100-0770-714NN78-5100-0770-72500 SERIESCASTIGLIONEAUG 11,2014 EMSDI nterconnect Solutions2016R. SCHERERSEP 05,2014 REVISED AND REDRAWNM56068 AUG 11,2014 JNCRSREVISE DIM ON SHT2 &CLIP CHART ON SHT5N68908 AUG 02,2016 JNCSCNOTCH "B"(SEE TABLE 1) Imaged: 8/5/2016 11:10 AM UTC-05 #1 RECOMMENDED HOLE PATTERNSHOWN FROM COMPONENT " X.

8 100" LOW PROFILE, SURFACE MOUNT, STRAIGHT AND RIGHT ANGLE THROUGH-HOLE3 MTM FOUR-WALL HEADER, 2500 SERIESORDERING INFORMATIONRIGHT ANGLE VERSIONX25XX-50XX-XXN= HIGH TEMP BLACK (PCT) (RB, UB OR UG PLATING REQ'D)BLANK= (UB OR UG PLATING)RB = 30" [ ] AVG. GOLD 200" [ ] MATTE TIN (RIA. E1 & C1 APPLY)UG = 15" [ ] AVG. GOLD 200" [ ] 60:40 TIN-LEAD SOLDER TAILS (RIA E3 & C2 APPLY)UB = 30" [ ] AVG. GOLD 200" [ ] 60:40 TIN LEAD SOLDER TAILS (RIA E3 & C2 APPLY)SOLDER TAIL:02 = FOR .062 [ ] THICK BOARD03 = FOR .094 TO .125 [ TO ] THICK BOARDPLATING:PIN QUANTITY:(SEE TABLE 1)TABLE "A"DIM. "B"POLARIZING [ ].508 [ ] [ ].608 [ ] [ ].708 [ ] [ ].908 [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] "A".

9 1 ORIENTATIONTRIANGLENOTCH "C"(SEE TABLE 1 & NOTE 3). "B"NOTCH "A"(SEE TABLE 1 & NOTE 3)BBSECTION [ ] FOR 02 [ ] FOR 03 VERSIONSOLDER DIM. TOEDGE OF PCBFOR ENOTCH COPYRIGHTC3M CenterSt. Paul,MN 55144 CHKDDATEAPPVLDATEDRFTDATEMFGDATECHKDDRFT REVECOISSUE DATE AND DESCRIPTIONDRAWING NUMBERREVISIONACCESSCODESDESIGN REFERENCENEXT ASSEMBLYDIVISIONDIVISION CODE TOLERANCESEXCEPT ASNOTEDDO .000 .00 .0 0 .0 .00 .000 ANGLES THIRD ANGLE PROJECTIONINTERPRET PERASME - 2009 MAX SURFACE ROUGHNESSALL SURFACESMARKED ONLYNOYESThis document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes.

10 All rights , 4-WALL, LO-PRO, .100 X .100,SMT, STRAIGHT & RA5378-5100-0770-714NN78-5100-0770-72500 SERIESCASTIGLIONEAUG 11,2014 EMSDI nterconnect Solutions2016R. SCHERERSEP 05,2014 REVISED AND REDRAWNM56068 AUG 11,2014 JNCRSREVISE DIM ON SHT2 &CLIP CHART ON SHT5N68908 AUG 02,2016 JNCSCNOTCH "B"(SEE TABLE 1) Imaged: 8/5/2016 11:10 AM UTC-05 "A"POSITION 1 ORIENTATIONTRIANGLENOTCH "C"(SEE TABLE 1 & NOTE 3)NOTCH "B"(SEE TABLE 1). "B". "A"(SEE TABLE 1 & NOTE 3)ORDERING INFORMATIONSURFACE MOUNT VERSIONN25XX-6V0C-XX-XXN = HIGH TEMP BLACK (PCT) (RB PLATING REQ'D)PLATING:RB = 30" [ ] AVG. GOLD 200" [ ] MATTE TIN (RIA. E1 & C1 APPLY)PIN QUANTITY:(SEE TABLE 1)TABLE "A"DIM. "B"POLARIZING NOTCHESTAPE ANDREEL [ ].