3009 Ex dm - Amisco

1 Has completed the EVI7 S9 Solenoid System with a special coil for pneumatic applications in potentially explosive ambient (group II), that fulfills the requirements of EN 60079-0, EN 60079-1, EN 60079-18 and EN coil is certified by T V in thermal class T5 (with coil surface temperature max 100 C) or T4 (with coil surface temperature max135 C).Ec-Type Examination Certificate number: T V IT 13 ATEX protection is assured by a thermal fuse that, in case of damage,disconnects the coil from product is developed to be used in ambients with temperature range from 50 C to +50 C, and it has a powerconsumption of for type T4 and 3W for type coil fits all Amisco standard operators: 3/2, 2/2 way, NC or NO, threaded or flange main voltages are available.

2 For other technical specifications see below and next Ex dm2014/34/UE ATEX Specific marking of explosion II - Electrical apparatus for places with a potentially explosive atmosphere, other than mines susceptible to fire 2 see the board gas atmosphere in the presence of combustible symbol Ex which indicates that the electrical apparatus corresponds to one of the protection type (EN 60079-0).Type of protection for gas enclosure d .Type of protection for gas encapsulation m , level mb .Type of protection for explosive dust atmospheres protection by equipment of Group II is subdivided according to the nature of the explosive gas atmospheres IIC, a typical gas is equipment of Group III is subdivided according to the nature of the explosive dust atmospheres IIIC, conductive Class.

3 T4/T5 for Gas and T130 C/T95 C for protection level [EPL] for explosive gas protection level [EPL] for explosive dust Description Equipment in this category is intended for use in areas in which explosive atmospheres caused by gases, vapours, mist or air/dust mixtures are likely to occur occasionally. The means of protection relating to equipment in this category ensure the requisite level of protection, even in the event of frequently occurring disturbances or equipment faults which normally have to be taken into and 221 and 22 SOLENOID SYSTEM Ex dmfor 2/2 and 3/2 way Normally Closed and Normally Open valvesNote:Voltage tolerance: 10%Coil temperature range: -50 C +50 CDuty cycle: 100%Standard voltages.

4 12 to 240 VAC - 50/60 Hz 6 to 48 VDCFor different orifice sizes and pressures contact Amisco 3009 ex dmb IIC T5 GbII2D Ex tb IIIC T5 DbRated power DC WInrush power AC VARated power AC VACoil temperature rise CCopper temperature rise CDCAC (50 Hz)AC (60 Hz)DCAC (50 Hz)AC (60 Hz)335404,83,2153042, Ex dmb IIC T4 GbII2D Ex tb IIIC T4 DbRated power DC WInrush power AC VARated power AC VACoil temperature rise CCopper temperature rise C3,85055 Operator way NC Flange3/2 way NC ThreadInlet orifice mmExhaust orifice mmWorking pressure bar1,21,450 101,51,450 101,51,450 101,51,450 way NC Flange2/2 way NC ThreadInlet orifice mmWorking pressure bar1,20 101,50 101,50 101,50 way NO Flange (Top inlet)3/2 way NO Thread (Top inlet)

5 3 W Coil - DC3,2 VA Coil - AC3,8 W Coil - DCInlet orifice mmWorking pressure bar1,450 71,450 101,450 101,450 10 All given information are subjected to changes without notice. ORIFICE (mm)P (bar)200,511,522,54681012 ORIFICE (mm)P (bar)200,511,522,54681012 Rev. 3/2017.