ABOUT ADC - Advanced Digital Cable, Inc.

1 PHONE: (800) 343 2579 FAX: (828) 389 3922 ABOUT ADCA dvanced Digital Cable (ADC) was founded in 1997 and began making coaxial cable for the booming Digital cable market. Since that time ADC has grown to be a key manufacturer of not only Digital coaxial cable but a wide range of cables designed and built for renewable energy applications. ADC was built from the ground up with progressive and innovative technolo-gy and equipment. Its people represent over 500 years of wire and cable expe-rience promising an unsurpassed dedication to developing and manufacturing the highest quality products in the industry. ADC is committed to continuous improvement and its Quality Management System is ISO 9001:2015 Registered ensuring that our cables meet the highest levels of proudly manufactures all of its cable in the USA and we are committed to manufacture and deliver quality wire and cable for many renewable energy applications.

2 Table of ContentsPower Cable USE-2 Power Cable.. 3 RHW-2 or RHH-2000V .. 4PV Photovoltaic Cable 600V Rated .. 52kV Rated.. 6 Dual Pass 600V Rated .. 7 Dual Pass 2kV Rated .. 8 Aluminum Cable USE-2 Power Cable.. 9 RHW-2 or RHH-2000V ..102kV PV Rated ..11 Bare Copper Ground WireStranded and Solid Bare Copper Wire ..12 ConnectorsSolar Panel Connectors ..13 Specialty CablePower and Control Multi-Conductor Cable ..14-21 Communication Cable..22 Power Plex ..23 USE-2 POWER CABLEPHONE: (800) 343 2579 FAX: (828) 389 3922 3 Cable Identification DescriptionSingle conductor, 90C Wet/Dry. Insulated with chemically cross-linked polyethylene for use in general purpose wiring for lighting and power - residential, commercial, and industrial buildings. Suitable for use in low leakage circuits requiring a dielectric constant of or lessConstructionConductors: 14 AWG - 750 MCM fully annealed stranded bare cop-per per ASTM B-3.

3 Class B Stranding per ASTM B-8. Insulation: Chemically cross-linked polyethyleneColors: Black, Brown, Orange, Yellow, Green, White, Red, Gray, Blue. Industry Listings & StandardsUL Listed as XLP USE-2 or RHH/RHW-2 per Standards 854 and 44 ICEA S-95-658/NEMA WC-70 Federal Specification A-A-5954490 C Wet/Dry -40 C RatedGasoline and Oil Resistant IIC(UL)US RW90 1000V ListedSunlight ResistantDirect BurialRoHS Compliant CT Rated and/or VW-1 Rated available upon requestCable DataPart NumberAWGS trandInsulation Thickness(mils)Nominal (inch)ApproximateNet Weight lbs/1M Ampacity90 C CopperXLPE Insulation Advanced Digital CABLE, INC. XX AWG XLP 90C (-40C) E197262 (UL) TYPE RHH OR RHW-2 GR II SR OR USE-2 OIL RES II SUN RES DIR BUR 600V c(UL) RW90 1KV RoHS The information contained on this specification is intended to be used as a guide in product selection and is believed to be reliable.

4 ADC has made every effort to ensure the data shown above is accurate at the time of publication. This specification is subject to change anytime without notice. REV0618 USE-2 POWER CABLEC ross-Linked Polyethylene Insulated 14 - 750 MCM 600 Volts 90 C Dry and WetRHW-2 or RHH - 2000 VPHONE: (800) 343 2579 FAX: (828) 389 3922 4 Cable Identification DescriptionADC s RHW-2 or RHH is a single conductor stranded copper insulated with chemically cross-linked for use in lighting and power applications and for other general purpose wiring applications. Suitable for use in circuits not exceeding 2000 volts. May be installed in raceway, duct, and sunlight resistant applications such as aerial installations. ConstructionConductors: Conforms to ASTM B-8 Class B with other classes available upon request. Insulation: Cross-linked polyethyleneColors: Black- Other colors available upon request.

5 Consult factory for minimum Listings & Standards90 C Wet or DryICEA S-95-658/NEMA WC70 Federal Specification A-A-59544 Meets UL 44 & 854 RequirementsRoHS CompliantSunlight Resistant CT Rated and/or VW-1 Rated available upon requestCable DataPart NumberAWGS trandInsulation Thick-ness(mils)Nominal (inch)ApproximateNet Weight lbs/1M Advanced Digital CABLE, INC. 10 AWG XLP (UL) TYPE RHH OR RHW-2 2KV 90C (-40C) GR II SR E218985 RoHS RHW-2 or RHH - 2000 VCross-Linked Polyethylene Insulated 14 - 750 MCM 2000 Volts 90 C Dry and WetThe information contained on this specification is intended to be used as a guide in product selection and is believed to be reliable. ADC has made every effort to ensure the data shown above is accurate at the time of publication. This specification is subject to change anytime without notice. REV0618 Bare CopperXLPE InsulationPV PHOTOVOLTAIC CABLEPHONE: (800) 343 2579 FAX: (828) 389 3922 5 Bare CopperXLPE Identification Advanced Digital CABLE INC.

6 XX AWG (UL) PV WIRE OR RHW-2 OR USE-2 90 C WET OR DRY (-40C) 600V SR GRII DIRECT BURIAL RoHS E324841 600V Rated PVCross-Linked Polyethylene Insulated 18 - 750 MCM 600 Volts -40 C to 90 C Wet and DryDescriptionADC s Solarlink brand Photovoltaic cable has a chemically cross-linked polyethylene use in grounded interconnection and ungrounded Photovol-taic power : Stranded bare copper conductor per ASTM B-3, B-8. Available in 7 or 19 stranded versions as well as tinned : Chemically Cross-linked polyethyleneColors: Black, Green, White, Red. Print on one side with a con-trasting ink. An extruded stripe and other colors are available upon Listings & StandardsUL Listed as Photovoltaic Cable per Standard Subject 4703 and 44-40 C/90 C Wet and Dry RatedGasoline and Oil Resistant IIRoHS CompliantSunlight Resistant VW-1 Flame Rating OptionalThe information contained on this specification is intended to be used as a guide in product selection and is believed to be reliable.

7 ADC has made every effort to ensure the data shown above is accurate at the time of publication. This specification is subject to change anytime without notice. REV0618 Cable DataPart NumberAWGS trandInsulation Thick-ness(mils)Nominal (inch)ApproximateNet Weight lbs/1M PV PHOTOVOLTAIC CABLEPHONE: (800) 343 2579 FAX: (828) 389 3922 6 Cable Identification DescriptionADC s Solarlink brand Photovoltaic cable has a chemically cross-linked polyethylene for use in solar power applicatioins that require 2,000 volt rating. For use in grounded interconnection and ungrounded Photovoltaic power systems. ConstructionConductors: Stranded bare copper conductor per ASTM B-3, B-8. Available in 7 or 19 stranded versions as well as tinned : Chemically Cross-linked polyethyleneColors: Black, Green, White, Red. Print on one side with a contrasting ink. An extruded stripe and other colors are avail-able upon Listings & StandardsUL Listed as Photovoltaic Cable per Standard Subject 4703 and 44-40 C/90 C Wet and Dry RatedGasoline and Oil Resistant IIRoHS CompliantSunlight ResistantVW-1 Flame Rating OptionalCable DataPart NumberAWGS trandInsulation Thick-ness(mils)Nominal (inch)ApproximateNet Weight lbs/1M 4 Advanced Digital CABLE INC.

8 XX AWG (UL) PV WIRE OR RHW-2 2000V OR USE-2 600V 90 C WET OR DRY (-40C) SR GRII DIRECT BURIAL RoHS E324841 2kV Rated PVCross-Linked Polyethylene Insulated 18 - 750 MCM 2000 Volts -40 C to 90 C Wet and DryThe information contained on this specification is intended to be used as a guide in product selection and is believed to be reliable. ADC has made every effort to ensure the data shown above is accurate at the time of publication. This specification is subject to change anytime without notice. REV0618 Bare CopperXLPE InsulationPV PHOTOVOLTAIC CABLEPHONE: (800) 343 2579 FAX: (828) 389 3922 7 DescriptionADC s Solarlink brand Photovoltaic cable has a chemically cross-linked polyethylene insulation with a sunlight resistant PVC for use in solar power applicatioins that require 600 volt rating. For use in grounded interconnection and unground-ed Photovoltaic power systems.

9 ConstructionConductors: Stranded bare copper conductor per ASTM B-3, B-8. Available in 7 or 19 stranded versions as well as tinned : White Chemically Cross-linked polyethylene with colored sunlight resistant PVC : Black, Green, White, Red. Print on one side with a con-trasting ink. An extruded stripe and other colors are available upon Listings & StandardsUL Listed as Photovoltaic Cable per Standard Subject 4703 and 4490 C Wet/105 C Dry RatedGasoline and Oil Resistant IIRoHS CompliantSunlight Resistant VW-1 Pass 600V Rated PVCross-Linked Polyethylene Insulated PVC Jacketed18 - 750 MCM 600 Volts 105 C Dry and 90 C WetThe information contained on this specification is intended to be used as a guide in product selection and is believed to be reliable. ADC has made every effort to ensure the data shown above is accurate at the time of publication.

10 This specification is subject to change anytime without notice. REV0618 Cable DataPart NumberAWGS trandInsulation Thickness(mils)JacketThickness(mils)Nomi nal (inch)ApproximateNet Weight lbs/1M Cable Identification 18-16 AWG: Advanced Digital CABLE INC. XX AWG (UL) PV WIRE 600V 90C WET OR 105C DRY SUN RES UV RATED VW-1 DIRECT BURIAL RoHS E324841 14 AWG-750 MCM: Advanced Digital CABLE INC. XX AWG (UL) PV WIRE 600V 90C WET OR 105C DRY SUN RES UV RATED VW-1 OR RHW-2 DIRECT BURIAL RoHS E324841 Bare CopperXLPE InsulationPVC JacketPV PHOTOVOLTAIC CABLEPHONE: (800) 343 2579 FAX: (828) 389 3922 8 Dual Pass 2kV Rated PVCross-Linked Polyethylene Insulated PVC Jacketed 18 - 750 MCM 2000 Volts 105 C Dry and 90 C WetDescriptionADC s Solarlink brand Photovoltaic cable has a chemically cross-linked polyethylene insulation with a sunlight resistant PVC for use in solar power applicatioins that require 2,000 volt rating.