Accessory Fitting Instructions - Triumph Instructions.com

1 Accessory Fitting Instructions1 of 4 Publication part number 9900737 issue 4 Triumph Designs Ltd. 2018 EnglishThank you for choosing this Triumph genuine Accessory kit. This Accessory kit is the product of Triumph 'suse of proven engineering, exhaustive testing, and continuous striving for superior reliability, safety read all of these Instructions before commencing the installation of the Accessory kit in order tobecome thoroughly familiar with the kit s features and the installation Instructions should be considered a permanent part of your Accessory kit.

2 And should remain with iteven if your Accessory equipped motorcycle is subsequently suppliedAuxiliary Power Socket KitKit numberModels AffectedA9828015 Street Twin, Street Cup, Street Scrambler, Speed Twin,Bonneville T100 from VIN 759204, Bonneville T120, Thruxton 1200, Thruxton 1200 , auxiliary power1 , M6 x 16 mm1 bracket1 washer, M181 , M61 off213452 of 4 Note: Triumph offers a broad range of approvedgenuine accessories for your motorcycle. We cannot therefore cover all possibleequipment variations in these Instructions .

3 Forremoval and installation of Triumph GenuineAccessories, always refer to the instructionssupplied with the respective Accessory kit. To obtain additional copies of any Triumphaccessory Instructions , visit or contact yourauthorised Triumph the seat, as described in the owner the battery, negative (black) the fuel tank, as described in theservice the auxiliary power socket from the kitand remove the large nut from the the nut for reuse.

4 The auxiliary power socket into themounting bracket in the orientation shown. Fitthe plastic washer from the kit and secure withthe large auxiliary power socket nut. Tightenthe nut to Mounting bracket2. Auxiliary power socket3. Auxiliary power socket nut4. Plastic washer, M18 WarningThis Accessory kit is designed for use on TriumphStreet Twin, Bonneville T120, Thruxton 1200 andThruxton 1200 R motorcycles only and should notbe fitted to any other Triumph model or to anyother manufacturer s motorcycle.

5 Fitting thisaccessory kit to any other Triumph model, or anyother manufacturer s motorcycle will affect theperformance, stability and handling of themotorcycle. This may result in loss of motorcyclecontrol and an have Triumph approved parts, accessoriesand conversions fitted by a trained technician ofan authorised Triumph dealer. The fitment ofparts, accessories and conversions by a technicianwho is not of an authorised Triumph dealer mayaffect the handling, stability or other aspects ofthe motorcycle s operation which may result inloss of motorcycle control and an this operation.

6 Ensure that themotorcycle is stabilised and adequately supportedto prevent risk of injury from the torque wrench of known accurate calibrationmust be used when Fitting this Accessory to tighten any of the fasteners to thecorrect torque specification may affect motorcycleperformance, handling and stability. This mayresult in loss of motorcycle control and the engine has recently been running, theexhaust system will be hot. Before working on ornear the exhaust system, allow sufficient time forthe system to cool, as touching any part of a hotexhaust could cause burn of the rear engine mount which ispositioned to the front of the throttle Rear engine mount2.

7 Throttle the auxiliary power socket facing the lefthand side of the motorcycle, position themounting bracket and auxiliary power socketassembly onto the rear engine mount asshown. Fit the M6 x 16 mm screw and washerfrom the kit. Tighten the screw to Rear engine mount2. Auxiliary power socket and backet3. Washer4. Screw, M6 x 16 the auxiliary power socket wiringconnector which is taped to the main wiringharness in the area under the fuel the wiring connector to the auxiliarypower Refit the fuel tank, as described in the the battery, positive (red) lead Refit the seat, as described in the owner SupplyNote: The auxiliary power socket provides acontinuous 12 Volt power supply regardless ofthe ignition being switched on or off.

8 Use of theauxiliary socket with the ignition switched offwill drain the motorcycle auxiliary power socket will provide a 12 Voltelectrical auxiliary power socket is protected by a 5 Ampfuse, therefore items with a current draw greaterthan 5 Amps (60 Watts) must not be plugged in tothe auxiliary power to the Service Manual for the fuse location. 2121342 WarningWhen connecting any electrical device to theauxiliary power socket ensure the wiring of thedevice is routed correctly and cannot contact anyhot surfaces of the motorcycle or interfere withany of the motorcycle controls.

9 Contact with a hotsurface may result in wiring harness damage andelectrical malfunctions. Any interference with themotorcycle controls may result in loss ofmotorcycle control and an of 4 WarningIf, after Fitting this Accessory kit, you have anydoubt about the performance of any aspect of themotorcycle, contact an authorised Triumph dealerand do not ride the motorcycle until theauthorised dealer has declared it fit for use. Ridinga motorcycle when there is any doubt as to anyaspect of the performance of the motorcycle mayresult in loss of motorcycle control and ride an Accessory -equipped motorcycle atspeeds above 80 mph (130 km/h).

10 The presence of accessories will cause changes inthe stability and handling of the to allow for changes in motorcycle stabilitymay result in loss of motorcycle control and that the 80 mph (130 km/h) limit will bereduced by the Fitting of non-approvedaccessories, incorrect loading, worn tyres, overallmotorcycle condition and poor road or motorcycle must not be operated above thelegal road speed limit except in operate this Triumph motorcycle at highspeed in closed-course, on-road competition or onclosed-course racetracks.