AireShare™ Ventilator Specification Sheet - Tjernlund

1 Job Name: Contractor: : Equipment Rep: Tjernlund Contact: Date: Description: Low sone, cross-flow blower quietly moves conditioned air throughthe wall cavity from one room to an adjacent room. Design allowsfor intake and diffuser to be located high or low or almost directlyacross from one another. Blower Grille:22 gauge aluminized steel. Washable powder coat with satinwhite finish. Can be repainted. Diffuser: 20 gauge aluminized steel with attached adjustable-fit built-in turning vane. Washable powder coat with satinwhite finish. Can be repainted. Blower: Cross-flow blower. Factory balanced for quiet :C-Frame motor.

2 Bearings designed for 32,000 operating hours. Supply Power:AS1: Installer supplied to the AS1 electrical box. Industry standard7/8 electrical knockouts located on the top and bottom for ease ofinstallation. Add a 120 VAC wall switch or thermostat to turn on/off. AS1P: Power cord factory installed and pre-wired. Requires instal-lation adjacent to a standard electrical outlet. Built-in on/off Notes:When installed between metal studs all knockouts should beplugged or shall NOT be installed in an exterior shall NOT be installed in a fire-rated :One (1) year material and :Typical Specification :Device shall be Tjernlund Model AS1 or shall move air using a vibration isolated, shall be equipped with a built-in turning shall have a discharge deflector with an angle of 15 to the shall have a sound level no greater than Sones.

3 Power consumption of device shall be no greater than shall have no power cord exposed outside the wall inwhich it is shall be Listed in the USA to ANSI/UL 507 and inCanada to CSA # Products, Inc. 1601 Ninth Street White Bear Lake, MN 55110 (651) 426-2993 (800) 255-4208 FAX (651) 426-9547 8513030 Rev AAireShare Ventilator Specification SheetModels AS1 and AS1 PModelVoltsAmpsWattsRPMS ones, , , 45dB75 Models AS1 and AS1P DimensionsAS1 and AS1P Diffuser AS1 Blower GrilleAS1P Blower Grille AS1 Blower HousingAS1P Blower HousingFront ViewSide ViewFront ViewSide ViewFront ViewSide ViewWall OpeningRough-In 1 1/4 Height 13 5/8 WidthWall OpeningRough-In 4 7/8 Height 13 7/8 WidthWall OpeningRough-In 4 7/8 Height 12 Width** Collapses for 2 x 3 Stud Compatibility