ALGORITHMIC PANEL - aguilera.es

1 ALGORITHMIC PANEL AE/SA-C1 INSTALLATION GUIDE VERSION SEP/11 3 AGUILERA ELECTRONICA INSTALLATION GUIDE AE/SA-C1 TABLE OF CONTENTS PAGE 1 INTRODUCTION.. 5 AIM OF THE GUIDE.. 5 OBSERVATIONS.. 5 WARNINGS AND PRECAUTIONS.. 5 APPROVALS.. 5 2 CONTENTS. MATERIAL INCLUDED IN THE PACK.. 7 CHECKING THE PANEL .. 7 7 3 INSTALLATION.. 9 PANEL LOCATION.. 9 Dimensions and attachment points.. 9 Cabinet 11 Removal of the base plate.. 13 Removal of the power source.

2 13 PARTS OF THE PANEL .. 13 Front plate.. 13 Base plate.. 13 Power source.. 13 Backup batteries.. 13 CONNECTIONS TO EXTERNAL CIRCUITS.. 14 230V mains power .. 14 Batteries.. 16 24V Auxiliary power output.. 17 remote Disconnection.. 18 Evacuation sounder.. 18 General relays.. 19 Day/night modes.. 20 Detection loops.. 20 RS-232 and RS-485 Communication ports.. 21 AE2 NET network cabling.. 22 End of line resistors on the AE2 NET network.. 22 Earth fault monitoring.. 22 4 RECOMMENDATIONS .. 23 5 PUTTING THE PANEL INTO SERVICE.. 25 CPU MICROSWITCH CONFIGURATION.. 25 STARTING UP THE FACILITY.. 27 lenguaje .. 28 Led test.

3 28 Clock setup.. 28 Startup mode.. 29 4 AGUILERA ELECTRONICA INSTALLATION GUIDE AE/SA-C1 Network diagnostics.. 31 VERIFICATION OF THE AE2 NET NETWORK S 32 Synchronisation.. 32 At rest.. 32 Active.. 33 Fault resetting.. 34 Equipment programming mode.. 34 STARTUP USING A PC WITH AGE41 SOFTWARE.. 35 CUSTOMISATION OF THE FACILITY.. 36 6 CONSUMPTION (BATTERY CALCULATION).. 37 PROCEDURE FOR BATTERY CALCULATION.. 37 Duration.. 37 Capacity calculation.. 37 7 MAINTENANCE.

4 39 Periodical operations.. 39 Service life of main components.. 39 8 SPECIFICATIONS.. 41 INSTALLATION REGISTRATION FORM.. 45 5 AGUILERA ELECTRONICA INSTALLATION GUIDE AE/SA-C1 1 INTRODUCTION. AIM OF THE GUIDE. The aim of this guide is to provide the user with all the descriptions of recommended procedures and technical details in order to install and start up the AE/SA-C1 ALGORITHMIC Fire Detection Control PANEL . The procedures described in this guide include advice and warnings so that the user adopts methodical, safe working practices during installation and startup.

5 OBSERVATIONS. The following guide is only valid for the connection and startup of the AE/SA-C1 PANEL . For other PANEL models, check the appropriate guide. The manufacturer reserves the right to change, modify or correct the information without prior notification. WARNINGS AND PRECAUTIONS. The installer of the PANEL and devices that make up the Fire Detection System must be authorised and trained in both handling of the PANEL and the current legislation. Before connecting any devices, check that the PANEL s power supply is disconnected. The user should read this guide and understand its contents before undertaking any tasks related to the AE/SA-C1 ALGORITHMIC PANEL .

6 If you have any doubts about any aspects covered by the guide, check with the supplier before beginning installation and startup. APPROVALS. The control PANEL has been designed in accordance with: Standards EN54-2 and EN54-4, in terms of both compulsory functions and some optional functions that have certain requirements. EU Electromagnetic Compatibility Directive 2004/108/EC. EU Low Voltage Compatibility Directive 2006/106/EC. Some of the PANEL s functions can be set up to make it more effective, increasing the device s possibilities and performance. These are not covered by standard EN54, and therefore, if used, would not comply with this standard.

7 When it is possible that a connection or configuration that does not comply with the regulations can be carried out, this will be indicated, with a brief explanation of the requirements set out in standard EN54. 6 AGUILERA ELECTRONICA INSTALLATION GUIDE AE/SA-C1 Aguilera Electr nica C/Juli n Camarillo 26 - 28037 MADRID - SPAIN 10 0099/CPD/A74/0159 AE/SA-C1 ALGORITHMIC FIRE DETECTION CONTROL PANEL EN 54-2:1997/A1:2006 Control and communication device for fire detection and alarm systems for buildings.

8 EN54-4:1997/A2:2006 Power supply device for fire detection and alarm systems for buildings. Optional functions with requirements: Output for fire alarm devices Dependencies on more than one alarm signal. Type-C dependency Point failure signals Total loss of power supply Disconnection of addressable points Technical data: see the documents provided by the manufacturer. Installation Guide. Document Ae-man-851-0-0 User Guide. Document 7 AGUILERA ELECTRONICA INSTALLATION GUIDE AE/SA-C1 2 CONTENTS.

9 MATERIAL INCLUDED IN THE PACK. CHECKING THE PANEL . It is important to carry out a visual inspection to see that the equipment supplied has not suffered any damage, before starting to install it. If you observe any problems, IT SHOULD NOT be installed; please contact the supplier. MATERIAL. The box contains the PANEL and the following supplementary material: 1. Installation Guide: This guide. 2. User guide: 3. Cable kit for backup batteries with terminal protector included. 4. Set of keys for the front plate s access level selector. 8 AGUILERA ELECTRONICA INSTALLATION GUIDE AE/SA-C1 9 AGUILERA ELECTRONICA INSTALLATION GUIDE AE/SA-C1 3 INSTALLATION.

10 PANEL LOCATION. The Control PANEL should be installed in a suitable place, in a protected place where it can be observed, and which meets the following requirements: The room temperature is between +5 C and +35 C at all times. The relative humidity is between 5% and 90%. The PANEL is to be mounted on a wall in such a way that the screen is clearly visible and the operating keys can be accessed easily. Its height from the floor should be selected so that the LCD screen is at eye height (at approximately m). The PANEL should not be situated in a place exposed to high humidity levels. The PANEL should not be situated in places exposed to vibration or collision.