Example: bankruptcy

Aluminum Electrolytic Capacitors, Power High …

101/102 BCcomponents Revision: 30-Jul-20201 Document Number: 28371 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Electrolytic Capacitors, Power high Ripple Current, Screw TerminalsFig. 1 FEATURES Long useful life: 10 000 h to 15 000 h at +85 C Available in case sizes up to 90 mm x 220 mm Polarized Aluminum Electrolytic capacitors , non-solid electrolyte Large types, cylindrical Aluminum case, insulated with a blue sleeve Pressure relief in the sealing Low ESR Material categorization: for definitions of compliance please see Buffering and filtering Motor drives, inverters, UPS, and traction systems Pulsed Power suppliesMARKINGThe capacitors are marked with the following information.

101/102 PHR-ST www.vishay.com Vishay BCcomponents Revision: 06-Sep-17 1 Document Number: 28371 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO …

Tags:

  High, Power, Capacitors, Vishay, Aluminum, High power, Electrolytic, Aluminum electrolytic capacitors

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Advertisement

Transcription of Aluminum Electrolytic Capacitors, Power High …

1 101/102 BCcomponents Revision: 30-Jul-20201 Document Number: 28371 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Electrolytic Capacitors, Power high Ripple Current, Screw TerminalsFig. 1 FEATURES Long useful life: 10 000 h to 15 000 h at +85 C Available in case sizes up to 90 mm x 220 mm Polarized Aluminum Electrolytic capacitors , non-solid electrolyte Large types, cylindrical Aluminum case, insulated with a blue sleeve Pressure relief in the sealing Low ESR Material categorization: for definitions of compliance please see Buffering and filtering Motor drives, inverters, UPS, and traction systems Pulsed Power suppliesMARKINGThe capacitors are marked with the following information.

2 Rated capacitance (in F) Tolerance on rated capacitance, code letter in accordance with IEC 60062 (M for 20 %) Rated voltage (in V) Date code (YYMM or in 2 digits according to IEC 60062) Name of manufacturer Code for factory of origin - sign to identify the negative terminal, visible from the top and side of the capacitor Code number Climatic category in accordance with IEC 60068 QUICK REFERENCE DATADESCRIPTIONVALUE101102 Nominal case size ( D x L in mm)35 x 60 to 90 x 220 Rated capacitance range (E6 series), CR220 F to 1 FTolerance on CR 20 %Rated voltage range, UR25 V to 100 V 200 V to 450 VCategory temperature range-40 C to +85 CEndurance test at 85 C2000 hUseful life at 85 C10 000 h (D 50 mm) 15 000 h (D 65 mm)10 000 hUseful life at 40 C, x IR applied400 000 h (D 50 mm) 600 000 h (D 65 mm)400 000 hShelf life at 0 V, 85 C500 hBased on sectional specificationIEC 60384-4 / EN 130300 Climatic category IEC 6006840 / 085 / 056longer lifehigherCV/volume105 C101/102 PHR-ST104 PHR-ST106 PED-ST500 PGP-ST101/102 BCcomponents Revision: 30-Jul-20202 Document Number: 28371 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

3 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES ( D x L in mm)CR ( F)UR (V)254063100200250350385400450220------- 35 x 6035 x 6035 x 60330------35 x 6035 x 8035 x 6035 x 80--------35 x 80-470-----35 x 6035 x 8035 x 8035 x 8035 x 105--------35 x 105-680----35 x 6035 x 8035 x 10535 x 10535 x 10550 x 80--------50 x 80-1000----35 x 8035 x 8050 x 8050 x 8050 x 8050 x 80----35 x 10535 x 105--50 x 10550 x 1051500----35 x 10535 x 10550 x 8050 x 10550 x 10550 x 105----50 x 8050 x 8050 x 105--65 x 1052200---35 x 6050 x 8050 x 8050 x 10565 x 10565 x 10565 x 105-----50 x 10565 x 105--76 x 1053300---35 x 6050 x 8050 x 10565 x 10576 x 10565 x 10576 x 105---35 x 8050 x 10565 x 105--76 x 10576 x 1464700--35 x 6035 x 8065 x 10565 x 10576 x 10576 x 10576 x 10576 x 146---35 x 105-76 x 10576 x 14676 x 14676 x 146-5600---------76 x 1466800--35 x 6035 x 10565 x 10576 x 10576 x 14676 x 14676 x 14676 x 220--35 x 8050 x

4 8076 x 10576 x 146---90 x 14610 000-35 x 6035 x 8050 x 8076 x 10576 x 10576 x 220-76 x 22090 x 220--35 x 10550 x 10576 x 14676 x 14690 x 146---15 00035 x 6035 x 6035 x 10550 x 10576 x 14676 x 14690 x 220----35 x 8050 x 80-------22 00035 x 6035 x 8050 x 8065 x 10576 x 22076 x 220-----50 x 8050 x 10576 x 10590 x 14690 x 146----33 00035 x 8035 x 10550 x 10576 x 10590 x 22090 x 220----50 x 8050 x 8065 x 10576 x 146------47 00035 x 10550 x 8065 x 10576 x 146------50 x 8050 x 10576 x 105-------68 00050 x 8050 x 10576 x 10576 x 146------50 x 10565 x 10576 x 146-------100 00050 x 10565 x 10576 x 14676 x 220------65 x 10576 x 105-90 x 146------150 00065 x 10576 x 10576 x 14690 x 220------76 x 10576 x 146--------220 00065 x 10576 x 14676 x 220-------76 x 105-90 x 146-------330 00076 x 14676 x 22090 x 220--------90 x 146--------470 00076 x 22090 x 220--------90 x 146---------680 00076 x 220---------1 000 00090 x 220---------101/102 BCcomponents Revision: 30-Jul-20203 Document Number: 28371 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

5 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT in millimeters AND AVAILABLE FORMS Fig. 2A - Mechanical drawings for standard M5 disc details refer to Table 1 Fig. 2B - Mechanical drawings for high current M6 disc details refer to Table 1 Notes Maximum permissible torque which may be applied to the termination screws: 2 Nm for M5; Nm for M6 For accessories refer to document Mounting Accessories , see The capacitors are delivered with screws and washers high current disc with 1/4 28 UNF (US) thread is available on requestTable 1 DIMENSIONS in millimeters AND MASSDESIGNDRAWINGL 1 Lt 1 D 1 P T H B d1 - 0 MbIb (g)35 x x x x x 105 x x 105 x x 105 x x 146 x 220 x 220 x 146 x 220 M x SDLLtHTBd1 LLtHTBd1 MbDlbClamp mounting (ST)Standard M5 discThreaded stud mounting (STB)PSafetyventThread M x SMbDDHTBd1lbLLtHTBd1 LLtClamp mounting (ST) high current M6 discThreaded stud mounting (STB)101/102 BCcomponents Revision: 30-Jul-20204 Document Number: 28371 For technical questions, contact.

6 DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT For bolt version holds: H cardbox box: + 10 mmNote Unless otherwise specified, all electrical values in Table 2 and 3 apply at Tamb = 20 C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %ORDERING EXAMPLEE lectrolytic capacitor 101 series10 000 F / 40 V; 20 %Nominal case size: 35 mm x 60 mm; ST version, standard M5 discOrdering code: MAL2 10117103E3 Former 12NC: 2222 10117103 Table 2 PACKAGING QUANTITIES AND DIMENSIONS in millimetersDESIGNPACKAGING QUANTITIES(units per box)CARDBOX DIMENSIONS L x W x H35 x 6050377 x 375 x 8835 x 8050377 x 375 x 12335 x 10550377 x 375 x 12950 x 8025377 x 375 x 12350 x 105 25377 x 375 x 12965 x 10516377 x 375 x 12965 x 105 HC16377 x 375 x 12976 x 10512377 x 375 x 12976 x 105 HC12377 x 375 x 12976 x 14612377 x 375 x 16876 x 146 HC12377 x 375 x 16876 x 220 12377 x 375 x 24276 x 220 HC12377 x 375 x 24290 x 146 HC8377 x 375 x 16890 x 220 HC8377 x 375 x 242 ELECTRICAL DATASYMBOLDESCRIPTIONCRR ated capacitance at 100 Hz, tolerance 20 %IRRated RMS ripple current at 100 Hz, 85 CIL5 Max.

7 Leakage current after 5 min at URESRMax. equivalent series resistance at 100 Hz ZMax. impedance at 20 kHzELECTRICAL DATA AND ORDERING INFORMATION FOR 101 SERIESUR(V)CR100 Hz( F)NOMINALCASE SIZE D x L(mm)IR100 Hz85 C(A)IL55 min(mA)ESR Hz(m ) kHz(m )LIFECODE (1)STANDARD M5 DISCHIGH CURRENT M6 DISCSTORDERING CODE CODE CODE CODE 00035 x 00035 x 00035 x 00050 x 00035 x 00050 x 00050 x 00050 x 00050 x 00065 x 00065 x 00076 x 00065 x 00076 x 00076 x 00076 x 00090 x 00076 x 000 00090 x BCcomponents Revision: 30-Jul-20205 Document Number: 28371 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT 00035 x 00035 x 00035 x 00035 x 00050 x 00035 x 00050 x 00050 x 00050 x 00050 x 00065 x 00065 x 00076 x 00076 x 00076 x 00076 x 00076 x 00090 x 00090 x x x x 00035 x 00035 x 00035 x 00050 x 00050 x 00050 x 00050 x 00065 x 00065 x 00076 x 00076 x 00076 x 00076 x 00076 x 00076 x 00090 x 00090 x DATA AND ORDERING INFORMATION FOR 101 SERIESUR(V)CR100 Hz( F)NOMINALCASE SIZE D x L(mm)IR100 Hz85 C(A)IL55 min(mA)ESR Hz(m ) kHz(m )LIFECODE (1)STANDARD M5 DISCHIGH CURRENT M6 DISCSTORDERING CODE CODE CODE CODE BCcomponents Revision: 30-Jul-20206 Document Number: 28371 For technical questions, contact.

8 DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT (1)Determines the applicable row in the table Endurance Test Duration and Useful Life Table 3100220035 x x x x x x x 00050 x 00050 x 00050 x 00065 x 00076 x 00076 x 00076 x 00076 x 00076 x 00076 x 00090 x 00090 x DATA AND ORDERING INFORMATION FOR 102 SERIESUR(V)CR100 Hz( F)NOMINALCASE SIZE D x L(mm)IR100 Hz85 C(A)IL55 min(mA)ESR Hz(m ) kHz(m )LIFECODE (1)STANDARD M5 DISCHIGH CURRENT M6 DISCSTORDERING CODE CODE CODE CODE x x x x x x x x x x x 00076 x 00076 x 00076 x 00076 x 00090 x 00090 x DATA AND ORDERING INFORMATION FOR 101 SERIESUR(V)CR100 Hz( F)NOMINALCASE SIZE D x L(mm)IR100 Hz85 C(A)IL55 min(mA)ESR Hz(m ) kHz(m )LIFECODE (1)

9 STANDARD M5 DISCHIGH CURRENT M6 DISCSTORDERING CODE CODE CODE CODE BCcomponents Revision: 30-Jul-20207 Document Number: 28371 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT x x x x x x x x x x x x x x 00076 x 00076 x 00076 x 00076 x 00090 x 00090 x x x x x x x x x x x x x 00076 x 00090 x 00090 x x x x x x x x x x x x DATA AND ORDERING INFORMATION FOR 102 SERIESUR(V)CR100 Hz( F)NOMINALCASE SIZE D x L(mm)IR100 Hz85 C(A)IL55 min(mA)ESR Hz(m ) kHz(m )LIFECODE (1)STANDARD M5 DISCHIGH CURRENT M6 DISCSTORDERING CODE CODE CODE CODE BCcomponents Revision: 30-Jul-20208 Document Number: 28371 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

10 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT (1)Determines the applicable row in the table Endurance Test Duration and Useful Life Note(1)Low ESL designs available on request40022035 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 00090 x ELECTRICAL DATAPARAMETERCONDITIONSVALUEV oltageSurge voltage 250 V versionsUS = x UR 350 V versionsUS = x URReverse voltageUrev 1 VCurrentLeakage currentAfter 1 min at URIL1 CR x UR After 5 min at URIL5 CR x URInductanceEquivalent series inductance (ESL)Case D = 35 mmTyp. 13 nHCase D = 50 mmTyp. 16 nHCase D = 65 mmTyp. 19 nH (1)Case D = 76 mmTyp. 20 nH (1)Case D = 90 mmTyp. 21 nH (1)ELECTRICAL DATA AND ORDERING INFORMATION FOR 102 SERIESUR(V)CR100 Hz( F)NOMINALCASE SIZE D x L(mm)IR100 Hz85 C(A)IL55 min(mA)ESR Hz(m ) kHz(m )LIFECODE (1)STANDARD M5 DISCHIGH CURRENT M6 DISCSTORDERING CODE CODE CODE CODE BCcomponents Revision: 30-Jul-20209 Document Number: 28371 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.


Related search queries