Always the right Stuff in Focus - renia.com

1 Always the right Stuff in FocusRenia USA Inc. TECH ADHESIVESNo Toluene, No MEK, dries clear, and easy to useRenia Syntic-TOTALC lear PUR-AdhesiveDrying time: 5-45 minutesTubes 90 g ~ 3 oz850 g (Quart) with brush 4 kg or US-GallonBest on PVC (Vinyl), TPR, PUR, Paper-leather Chrome tanned LeatherRenia OrtecAll Purpose CementDrying time: 5-60 minutes 850 g (Quart) with brush 4 kg or US-GallonAlso best on PP, PE, EVA,TPRR enia Top-fitAll Purpose Cement Drying time: 5-40 minutes Tubes 90 g ~ 3 oz (Klebfest)850 g (Quart) with brush US-Gallon Best on most shoe materialsReniaColle de CologneThe Real Multi Purpose Cement Drying time: 5-40 minutes850 g (Quart) with brush 4 kg or US-GallonAlso best on Vinyl (PVC) Renia - Primer for PURgreen, 85 ml, 250 mlRenia - Rehagol(Primer for TPR) yellow 85 ml, 250 mlRenia - Hardener50 ml, 1 literRenia - All Purpose Thinnerfor all Renia Adhesives Quarts, 5 liter or US-GallonGP-Atom and Renia ProtoColle Superglue Yankee-WAX - finishing waxAll Renia Adhesives work on Leather, Rubber, TPR, Fabrics, Felt, Cork, PUR, no settings, no phase separation, extremely high green strength your partner in service and q ualityMADEINGERMANYUSA Prospekt Auge VS+RS 215,9x 279,4 15_15 11:07 Seite 1 STEP TWO.

2 Bond with Renia COLLE DE COLOGNE or Renia MULTI-COLLE Material How to recognize How to prepareSuper-Fix Top-fitOrtecColle deSyntic-CologneTOTALL eatherfibre structuresand Chrome tanned Leather fibre structure, green coloursandHHHHHR ubbertypical smellsand Natural Rubbermelts when sanded sandHHHH EVAsoft poroussand CorkCork structure Vinyl (PVC)Melts when sanded, Sand and clean typical chlorine smellwith AcetoneTRSimilar to natural rubberSand and RRMelts with thinnerprepare with RehagolPURporous, light weight,Sand, prepare withPPPP integral foamPrimer for PURP olyethylene Hardplastic forTouch the surface with an open Polypropyleneorthopedics and orthoticsflame (gas) for a few secondsPS-PolystyreneHardplastic for high heelsSand or clean with Melts with AcetoneAcetone or MEKSIMPLE USAGE in all bonding: sand and clean dust from the surfaces.

3 Greasy surfaces (like PVC or TR) should be chemically cleaned with acetone or softer the material, the less with less pressure, press before DE COLOGNE and MULTI-COLLE can be used cold - or reactivated with infra-red, a heater or a hair parts can be sanded, trimmed and finishedimmediately after products can be bonded without special preparation. Some man-made materials may show good initial bonding,but later separate under wear conditions. To avoid this, we suggest the following special helpers:With PUR Use Renia Primer for PUR (green)Pre-coat PU with green Primer and apply Renia Adhesives immediatelyWith TR Use Renia Rehagol (yellow)Pre-coat TR with Rehagol the yellow primer and wait 15 minutes before applying Renia AdhesivesGreasy Material Use Renia HardenerMix 5% to 10% of Renia Hardener with the amount of Renia Adhesives you might need for the job and then work normally with this mixture.

4 Any leftovers can be used for the next gluing ONE:Identify the material to be bondedRenia COLLE DE COLOGNE and Renia MULTI-COLLE have identical adhesive properties. The open time for COLLE DE COLOGNE is 5 30 minutes. The open time for MULTI-COLLE is 3 15 minutes. Use whichever product best fits your own : + Hardener C R: + Rehagol P: + PrimerRenia USA Inc. Prospekt Auge VS+RS 215,9x 279,4 15_15 11:07 Seite 2