Example: bachelor of science

Ambient Air Temperature (AAT) Sensor …

Less InfoCountries: CANADA, TAIWAN, UNITED STATES, MEXICO, GUAM, KOREA, SOUTH KOREAD ocument ID: IK0800284 Availability: ISIS, FleetISISR evision: 17 Major System: ELECTRICAL SYSTEMC reated: 5/16/2011 Current Language: EnglishLast Modified: 1/5/2016 Other Languages: Fran ais, Espa ol, Author: Nathaniel ZumhagenViewed: 10782 Hide DetailsCoding InformationCopy LinkCopy Relative LinkBookmarkAdd to FavoritesPrintProvide FeedbackHelpfulNot HelpfulView My Bookmarks12244 Title: Ambient Air Temperature (AAT) Sensor Faults/Location/DiagnosticsApplies To: Navistar N13 Engines and Cummins ISX Engines Cummins ISB, N9 and N10 Change LogDealers: Please refer to the change log text box below for recent changes to this article: 08/12/2015 - Removed 2010 MaxxForce 11/13. Please refer to updated manual - Author updated for feedback - Add TranStar model11/14/14 - Added additional engines, update coding to make search easier11/04/14 - Added table of contents.

number of sensors used and location of each sensor also varies based on vehicle model and engine application. This article will help outline the different installation options for this sensor. On all SCR vehicles, the cluster will receive AAT Sensor data via J1939, 0595BTH, reducing the number of aat sensors from 2 to 1 on each SCR vehicle.

Tags:

  Based, Temperatures, Sensor, Ambient, Ambient air temperature

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of Ambient Air Temperature (AAT) Sensor …

1 Less InfoCountries: CANADA, TAIWAN, UNITED STATES, MEXICO, GUAM, KOREA, SOUTH KOREAD ocument ID: IK0800284 Availability: ISIS, FleetISISR evision: 17 Major System: ELECTRICAL SYSTEMC reated: 5/16/2011 Current Language: EnglishLast Modified: 1/5/2016 Other Languages: Fran ais, Espa ol, Author: Nathaniel ZumhagenViewed: 10782 Hide DetailsCoding InformationCopy LinkCopy Relative LinkBookmarkAdd to FavoritesPrintProvide FeedbackHelpfulNot HelpfulView My Bookmarks12244 Title: Ambient Air Temperature (AAT) Sensor Faults/Location/DiagnosticsApplies To: Navistar N13 Engines and Cummins ISX Engines Cummins ISB, N9 and N10 Change LogDealers: Please refer to the change log text box below for recent changes to this article: 08/12/2015 - Removed 2010 MaxxForce 11/13. Please refer to updated manual - Author updated for feedback - Add TranStar model11/14/14 - Added additional engines, update coding to make search easier11/04/14 - Added table of contents.

2 Update schematics and troubleshooting for engine sensor09/09/14 - Added Change log and AAT Sensor part# per dealer feedbackTable of ContentsClick on the items below to jump to each section:DescriptionCluster Circuit DiagramsSymptom(s) Sensor Location - Big Bore EnginesSpecial Tool(s) / SoftwareSensor Location - Medium Duty EnginesService Parts InformationEngine Sensor Circuit DiagramsEngine Sensor TroubleshootingWarranty Coding / SRTC luster Sensor TroubleshootingOther ResourcesDescriptionThe Ambient Air Temperature Sensor provides information to the Engine and / or Cluster based on vehicle model and engine application. The number of sensors used and location of each Sensor also varies based on vehicle model and engine application. This article will help outline the different installation options for this all SCR vehicles, the cluster will receive AAT Sensor data via J1939, 0595 BTH, reducing the number of aat sensors from 2 to 1 on each SCR unable to find AAT Sensor in the mirror, check service portal for previous repairs.

3 We have seen cases where the mirror head was replaced and the Sensor was not reinstalled properly.( Return to Top )Symptom(s)Diagnostic Trouble Code(s) & Dashboard Indicator Light(s):Page 1 of 12IK0800284 Ambient Air Temperature (AAT) Sensor Faults/Location/Diagnostics2/1/2016 / LightCummins FaultDescriptionSPN 171 FMI 22389 AAT signal does not agree with other sensorsSPN 171 FMI 3249 AAT signal out of range HIGHSPN 171 FMI 4256 AAT signal out of range LOWC ustomer Observations or Concerns: MIL Engine performance may be reduced Unable to perform regen ( Return to Top )Special Tool(s) / SoftwareTool DescriptionTool NumberCommentsInstructionsServiceMaxxEZ- Tech SoftwareCummins INSITEEZ-Tech Software( Return to Top )Service Parts InformationKit DescriptionPart NumberQuantity RequiredNotesSender, Ambient Temperature3561562C11( Return to Top )Engine Sensor TroubleshootingThere are two Ambient Temperature sensors. The Sensor located behind the cab along the left frame rail is the Sensor the engine uses.

4 To confirm this, unplug the Sensor and observe the cluster LCD display, it the reading stays the same, the correct Sensor is unplugged. There is also a Sensor located at the front of the chassis that the gauge cluster uses for the temp article begins and discusses the Engine AAT Sensor , prior to and first. After August 23, 2013, Some SCR engines have the Engine AAT Sensor mounted in the driver side mirror head and alternatively the Sensor could be mounted to the horn bracket. The location depends on build Navistar N13 DiagnosticsFAULT CODE 171-2 ONLYStepActionDecision1 Update ECM Calibration Check Calibration Scorecard on Service Portal Use Electronic Service Tool (EST) to clear the fault code. This code will be corrected with the new ECM CalibrationRepair MaxxForce 11/13L DiagnosticsFAULT CODE 171-2 ONLYNOTE: If the ECM is setting/logging code 171-2 and the Sensor tests good DO NOT replace the Sensor , there is a new calibration available as of March 7, 2014 for EGR 2 of 12IK0800284 Ambient Air Temperature (AAT) Sensor Faults/Location/Diagnostics2/1/2016 ECM Calibration Check Calibration Scorecard on Service Portal Use Electronic Service Tool (EST) to clear the fault code.

5 This code will be corrected with the new ECM CalibrationRepair Engines with Ambient Air Temp SensorFAULT CODE(s) 171-3 and 171-4 ONLYR efer to the appropriate Engine or Chassis wiring schematic manual to ensure you are on the proper ECM connector and Resistance of the Sensor and compare to the chart shown in Figure 1 SPEC: based on Ambient Temp Is resistance measurement in spec?Yes: Go to step 2No: Replace AAT SensorStepActionDecision2 Measure voltage between Ambient Temperature Sensor connector cavity A and GND SPEC: 5 +/- Vdc Is voltage measurement in spec?Yes: Go to step 3No: Inspect wire from ECM to AAT Sensor pin A for open or shortStepActionDecision3 Measure voltage between Ambient Temperature Sensor connector cavity A and cavity B SPEC: 5 +/- Vdc Is voltage measurement in spec?Yes: Restore back to operational condition and retest for fault code 171-3 or 171-4No: Inspect ZVR wire from ECM to AAT Sensor pin B for open or short( Return to Top )Cluster Sensor TroubleshootingFAULT CODE(s) 171-3 and 171-4 ONLYThe instrument cluster, connector 1501 pin 9, sends a 5-volt source to the Temperature Sensor .

6 As the voltage goes across the Temperature Sensor it decreases, the amount of voltage drop depends on outside Temperature . The reduced voltage then returns to the instrument cluster on pin 8 of connector 1500. The instrument cluster turns the received signal into to the Temperature shown on the : The Electronic Gage Cluster display will replace Temperature reading with two dashes (- -) if a fault is present with the Ambient Temperature Sensor Resistance of the Sensor and compare to the chart shown in Figure 1 SPEC: based on Ambient Temp Is resistance measurement in spec?Yes: Go to step 2No: Replace AAT SensorStepActionDecisionPage 3 of 12IK0800284 Ambient Air Temperature (AAT) Sensor Faults/Location/Diagnostics2/1/2016 voltage between Ambient Temperature Sensor connector cavity A and GND SPEC: 5 +/- Vdc Is voltage measurement in spec?Yes: Go to step 3No: Inspect wire from cluster 1501-9 to AAT Sensor pin A for open or shortStepActionDecision3 Measure voltage between Ambient Temperature Sensor connector cavity A and cavity B SPEC: 5 +/- Vdc Is voltage measurement in spec?

7 Yes: Restore back to operational condition and retest for fault code 171-3 or 171-4No: Inspect ZVR wire from cluster 1500-8 to AAT Sensor pin B for open or shortAAT Sensor Temperature VS. Resistance ChartFigure 1 Return to Troubleshooting Engine Sensor Return to Cluster Sensor Troubleshooting( Return to Top )Cluster Circuit Diagram(s)IMPORTANT: Due to variations during vehicle production, be sure to select the most current wiring schematic manual, specific to the year and model of the vehicle being serviced. ProStar / LoneStar wiring for Cab Sensor ProStar / LoneStar wiring for Cab Sensor with Front Axle Load Sensor HPV wiring for Cab Sensor HPV wiring for Cab Sensor with Front Axle Load Sensor TerraStar wiring for Cab SensorThe Cab Temperature Sensor is typically mounted near the front bumper or on the cooling package. If the Sensor cannot be found verify the wiring to the gauge cluster is present or that the outside air temp monitor feature as ordered on the 4 of 12IK0800284 Ambient Air Temperature (AAT) Sensor Faults/Location/Diagnostics2/1/2016 2 Medium Duty Chassis Standard Mounting Location for Cluster SensorFigure 3 Page 5 of 12IK0800284 Ambient Air Temperature (AAT) Sensor Faults/Location/Diagnostics2/1/2016 Chassis only: The AAT Sensor was relocated to the ABS ECU bracket May 2012( Return to Top ) Sensor Location - Big Bore EnginesBig Bore Pre SCR Engines and SCR Engine prior to August 2013:The engine Sensor is located on the left frame rail midway between the back of cab and front drive axle, or near the front drive axle.

8 The two photos below show both possible mounting locations (Figure 4 and Figure 5).Figure 4 Page 6 of 12IK0800284 Ambient Air Temperature (AAT) Sensor Faults/Location/Diagnostics2/1/2016 5 Big Bore Post August 2013 build w/SCR engine, driver's side mirror head (Figure 6):Figure 6 Page 7 of 12IK0800284 Ambient Air Temperature (AAT) Sensor Faults/Location/Diagnostics2/1/2016 and N13 Alternate Location (Figure 7):Figure 7 ISX15 and N13 Alternate Location PayStar / 9900i (Figure 8):Figure 8 Page 8 of 12IK0800284 Ambient Air Temperature (AAT) Sensor Faults/Location/Diagnostics2/1/2016 ( Return to Top ) Sensor Location - Medium Duty EnginesN9/10 and ISB engine platforms moved the Engine AAT to the driver mirror on August 8, 2014 (Figure 9):Figure 9 Page 9 of 12IK0800284 Ambient Air Temperature (AAT) Sensor Faults/Location/Diagnostics2/1/2016 prior to August 8, 2014 on CE Bus Page 10 of 12IK0800284 Ambient Air Temperature (AAT) Sensor Faults/Location/Diagnostics2/1/2016 ( Return to Top )Engine Sensor Circuit Diagram(s)N13 ProStar built after May 2014N13 ProStar built prior to May 2014 / MaxxForce 11/13N13 PayStar / 9900i built after May 2014N13 PayStar / 9900i built prior to May 2014 / MaxxForce 11/13 ISX15 ProStar built after May 2014 ISX15 ProStar built prior to May 2014 ISX15 PayStar / 9900i built after May 2014 ISX15 PayStar / 9900i built prior to May 2014 ISB built after May 2014 ISB built prior to May 2014N9/N10 built after May 2014N9/N10 built prior to May 2014( Return to Top )Warranty Coding / SRTW arranty Claim Coding:Group:12000 - EnginesNoun:160 - Sender, Ambient TemperatureWarranty Claim Coding:Group:08960 - Miscellaneous (Electrical)Noun.

9 784 - Thermometer, ElectronicStandard Repair Time(s):Page 11 of 12IK0800284 Ambient Air Temperature (AAT) Sensor Faults/Location/Diagnostics2/1/2016 DetailsFeedback InformationViewed: 10781 Helpful: 122 Not Helpful: 44No Feedback FoundCopyright 2016 Navistar, Air Temperature Sensor , ReplaceProStarCummins Temperature Display Sensor , ReplaceAll SRT Example:Claim Comment Suggestion:Special Requirement(s):( Return to Top )Other Resource(s) IK0800369 - 2006-2009 Cummins Active Fault 249 / 256 Ambient Air Temperature Sensor 1 Circuit ( Return to Top )Page 12 of 12IK0800284 Ambient Air Temperature (AAT) Sensor Faults/Location/Diagnostics2/1/2016


Related search queries