AMMONIA - AQUEOUS SOLUTIONS (10% - 35%)

1 Safety Data Sheet1. IDENTIFICATION OF THE MATERIAL AND SUPPLIERP roduct Name: AMMONIA - AQUEOUS SOLUTIONS (10% - 35%)Other name(s):Aqua AMMONIA ; Ammonium hydroxide solution; Ammonium hydrate; Aqua AMMONIA ;Aqua AMMONIA 25%; Aqua AMMONIA 32%; AMMONIA AQUEOUS solution 32%.Recommended Use of the Chemicaland Restrictions on UseTextiles, manufacture of rayon, rubber, fertilizers, refrigeration, condensationpolymerization, pharmaceuticals, AMMONIA soaps, lubricants, ink manufacture, explosives,ceramics, detergents, food additives, household :Ixom Operations Pty LtdABN:51 600 546 512 Street Address:Level 8, 1 Nicholson StreetEast Melbourne Victoria 3002 AustraliaTelephone Number:+61 3 9906 3000 Emergency Telephone:1 800 033 111 (ALL HOURS)Please ensure you refer to the limitations of this Safety Data Sheet as set out in the "Other Information" section at the end of this Data HAZARDS IDENTIFICATIONC lassified as Dangerous Goods by the criteria of the Australian Dangerous Goods Code (ADG Code) for Transport byRoad and Rail.

2 DANGEROUS material is hazardous according to Safe Work Australia; HAZARDOUS of the chemical:Skin Corrosion - Sub-category 1 CSpecific target organ toxicity (single exposure) - Category 3 Acute Aquatic Toxicity - Category 1 SIGNAL WORD: DANGERP roduct Name: AMMONIA - AQUEOUS SOLUTIONS (10% - 35%)Hazard Statement(s):H314 Causes severe skin burns and eye May cause respiratory Very toxic to aquatic : 15/04/2015 Substance No: 000031026101 Precautionary Statement(s):Prevention:P260 Do not breathe mist, vapours, Wash hands thoroughly after Use only outdoors or in a well-ventilated Avoid release to the Wear protective gloves / protective clothing / eye protection / face : 5 Page 1 of 7 Safety Data SheetResponse:P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce +P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing.

3 Rinse skin with Specific treatment (see First Aid Measures on Safety Data Sheet).P363 Wash contaminated clothing before +P340 IF INHALED: Remove person to fresh air and keep comfortable for Call a POISON CENTER or doctor/physician if you feel +P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to Immediately call a POISON CENTER or Collect :P403+P233 Store in a well-ventilated place. Keep container tightly Store locked :P501 Dispose of contents and container in accordance with local, regional, national, international Schedule (SUSMP):S6 COMPOSITION AND INFORMATION ON INGREDIENTSC omponentsCAS NumberProportionHazard CodesWater7732-18-565-90%- AMMONIA , AQUEOUS solution1336-21-610-35%H314 H335 H4004. FIRST AID MEASURESFor advice, contact a Poisons Information Centre ( phone Australia 131 126; New Zealand 0800 764 766) or :Remove victim from area of exposure - avoid becoming a casualty.

4 Remove contaminated clothing and loosenremaining clothing. Allow patient to assume most comfortable position and keep warm. Keep at rest until fullyrecovered. If patient finds breathing difficult and develops a bluish discolouration of the skin (which suggests a lack ofoxygen in the blood - cyanosis), ensure airways are clear of any obstruction and have a qualified person give oxygenthrough a face mask. Apply artificial respiration if patient is not breathing. Seek immediate medical Name: AMMONIA - AQUEOUS SOLUTIONS (10% - 35%)Skin Contact:If spilt on large areas of skin or hair, immediately drench with running water and remove clothing. Continue to washskin and hair with plenty of water (and soap if material is insoluble) until advised to stop by the Poisons InformationCentre or a : 15/04/2015 Substance No: 000031026101 Eye Contact:If in eyes, hold eyelids apart and flush the eye continuously with running water.

5 Continue flushing until advised to stopby a Poisons Information Centre or a doctor, or for at least 15 : 5 Ingestion:Immediately rinse mouth with water. If swallowed, do NOT induce vomiting. Give a glass of water. Seek immediatemedical 2 of 7 Indication of immediate medical attention and special treatment needed:Treat symptomatically. Can cause corneal burns. Following severe exposure, the patient should be kept undermedical supervision for at least 48 Data Sheet5. FIRE FIGHTING MEASURESS uitable Extinguishing Media:Not combustible, however, if material is involved in a fire use: Fine water spray, normal foam, dry agent (carbondioxide, dry chemical powder).Hazchem or Emergency Action Code: 2 RSpecific hazards arising from the chemical:Non-combustible material. May form flammable vapour mixtures with air.

6 Avoid all ignition sources. Caution should beexercised when opening storage containers or vessels. Flammable concentrations of AMMONIA gas can accumulatein the head protective equipment and precautions for fire-fighters: AMMONIA : The main products of combustion in air, at or above 780 C, are nitrogen and water with small amounts ofnitrogen dioxide and ammonium nitrate. AMMONIA decomposes into flammable hydrogen gas at approximately 450 C. May form flammable mixtures in air. The presence of oil or other combustible material will increase the firehazard. Fatalaties have occurred as a result of the explosive nature of the AMMONIA gas. If involved in a fire, keepcontainers cool with water spray. If safe to do so, remove containers from path of fire. Fire-fighters to wear full bodyprotective clothing and self-contained breathing apparatus.

7 Consider ACCIDENTAL RELEASE MEASURESE mergency procedures/Environmental precautions:Clear area of all unprotected personnel. If contamination of sewers or waterways has occurred advise localemergency precautions/Protective equipment/Methods and materials for containment and cleaning up:Slippery when spilt. Avoid accidents, clean up immediately. Wear protective equipment to prevent skin and eyecontact and breathing in vapours. Work up wind or increase ventilation. Contain - prevent run off into drains andwaterways. Use absorbent (soil, sand or other inert material). Neutralise residues with dilute acid. Collect and seal inproperly labelled containers or drums for HANDLING AND STORAGEThis material is a Scheduled Poison S6 and must be stored, maintained and used in accordance with the for safe handling:Avoid skin and eye contact and breathing in vapour, mists and aerosols.

8 Keep out of reach of Name: AMMONIA - AQUEOUS SOLUTIONS (10% - 35%)Conditions for safe storage, including any incompatibilities:Store in cool place and out of direct sunlight. Store away from foodstuffs. Store away from sources of heat or away from incompatible materials described in Section 10. Keep containers closed when not in use - checkregularly for : 15/04/2015 Substance No: 0000310261018. EXPOSURE CONTROLS/PERSONAL PROTECTIONV ersion: 5 Control Parameters: No value assigned for this specific material by Safe Work Australia. However, WorkplaceExposure Standard(s) for constituent(s):Page 3 of 7 AMMONIA : 8hr TWA = 17 mg/m3 (25 ppm), 15 min STEL = 24 mg/m3 (35 ppm)Safety Data SheetAs published by Safe Work Australia Workplace Exposure Standards for Airborne - The time-weighted average airborne concentration of a particular substance when calculated over aneight-hour working day, for a five-day working (Short Term Exposure Limit) - the airborne concentration of a particular substance calculated as atime-weighted average over 15 minutes, which should not be exceeded at any time during a normal eight hour workday.

9 According to current knowledge this concentration should neither impair the health of, nor cause unduediscomfort to, nearly all Workplace Exposure Standards are guides to be used in the control of occupational health hazards. Allatmospheric contamination should be kept to as low a level as is workable. These workplace exposure standardsshould not be used as fine dividing lines between safe and dangerous concentrations of chemicals. They are not ameasure of relative engineering controls:Ensure ventilation is adequate and that air concentrations of components are controlled below quoted WorkplaceExposure Standards. Keep containers closed when not in in the handling and application of this material, safe exposure levels could be exceeded, the use of engineeringcontrols such as local exhaust ventilation must be considered and the results documented.

10 If achieving safe exposurelevels does not require engineering controls, then a detailed and documented risk assessment using the relevantPersonal Protective Equipment (PPE) (refer to PPE section below) as a basis must be carried out to determine theminimum PPE protection measures, such as Personal Protective Equipment (PPE):The selection of PPE is dependent on a detailed risk assessment. The risk assessment should consider the worksituation, the physical form of the chemical, the handling methods, and environmental factors. OVERALLS, CHEMICAL GOGGLES, RUBBER BOOTS, AIR MASK , GLOVES (Long), APRON.* Not required if wearing air supplied overalls, chemical goggles, full face shield, elbow-length impervious gloves, splash apron or equivalentchemical impervious outer garment, and rubber boots. Use with adequate ventilation.