Anderson Greenwood Hand Valves Catalog Hand …

1 Anderson Greenwood Hand Valves CatalogHand Valves and Accessories 1998, Rev. 1999 Anderson Greenwood reserves the right to change product designs and specifications without OverviewThe H7 Series Valves are designed forsafe, repetitive bubble-tight closure, sim-ple maintenance, and a long, trouble-freelife. A free-swiveling ball end stem is incor-porated for bubble-tight variety of standard end connections and stem packing is available, along withtrim to meet the requirements of NACEMR0175-latest revision. All Valves are 100 percent pressure tested. Materialtraceability of the body is available pressures in oil and gas production have led to the development of the H71 valve. Rated to 10,000 psig[689 barg] @ 200 F [93 C], this valve pro-vides long life and bubble-tight shutoff insevere operating and Benefits Ball end stemeliminates seat galling,provides bubble-tight shutoff and longlife.

2 The hardened, non-rotating ballensures perfect alignment closure. Packing below threadsprevents lubri-cant washout, thread corrosion, andkeeps solids from entering the threadarea, which can cause galling. It alsoprevents process contamination. Adjustable packingadjusts easily loosen jam nut, tighten bushing slight-ly, then retighten jam nut. Decreasespacking replacement downtime andincreases valve life. Dust coverprevents lubricant washoutand keeps contaminants (dirt, rain,etc.) out of bonnet assembly. Safety back seatingprevents stemblowout or accidental removal while inoperation and provides a metal-to-metal secondary stem seal while in thefull open position. Panel mount(optional) affords oppor-tunity to use high quality products inracks or panels.

3 Chrome plating of 316 SSpreventsgalling or freezing of stem threadswhen similar metals mate. CS valvesuse a 303 SS stem. Rolled threadsprovide additionalthread strength. The stem, bonnet, andmale NPT threads are rolled, not cut. Mirror stem finishburnished to a 16 RMS finish in the packing areaenables smooth stem operation andextends packing life. Body-to-bonnet sealis metal-to-metalin constant compression, isolating thebonnet threads from process fluid cor-rosion. Eliminates possible tensilebreakage of bonnet, and gives a reli-able seal point. Bonnet lock pinis another safety feature which prevents the accidentalseparation of the bonnet from thebody. However, normal valve mainte-nance and repair are still Seated Hand Valves H7 and H713/16-inch [ mm], 6000 and 10,000 psig [414 and 689 barg]H7H71 Anderson Greenwood Hand Valves CatalogHand Valves and Accessories 1998, Rev.

4 1999 Anderson Greenwood reserves the right to change product designs and specifications without by MNPT (Angle)H7 and H71 Specifications3/16-inch [ mm]: 6000 and 10,000 psig [414 and 689 barg] by FNPTV alve1 ABC2C2 Teflon GRAFOIL 1/4 F x1/4 [ ] [ ] [ ] [ ]1/2 F x 1/2 [ ] [ ] [ ] [ ]FNPT by MNPTV alve1 ABC2C2 DTeflon GRAFOIL 1/4 F x 1/2 [ ] [ ] [ ] [ ] [ ]1/2 F x 1/2 [ ] [ ] [ ] [ ] [ ]3/4 F x 3/4 [ ] [ ] [ ] [ ] [ ]FNPT by MNPT (Angle)Valve1 ABC2C2 DTeflon GRAFOIL 1/2 F x 1/2 [ ] [ ] [ ] [ ] [ ]Notes1. Approximate valve weight: lb [ kg].2. Valve The CS Teflon packed valve dimension ; ; by FNPTFNPT by MNPTD imensions, inches [mm] Anderson Greenwood Hand Valves CatalogHand Valves and Accessories 1998, Rev.

5 1999 Anderson Greenwood reserves the right to change product designs and specifications without and H71 Specifications3/16-inch [ mm]: 6000 and 10,000 psig [414 and 689 barg]Tube by Tube (H7 only)Valve1 ABC2C2 Teflon GRAFOIL 1/4 T x 1/4 [ ] [ ] [ ] [ ]3/8 T x 3/8 [ ] [ ] [ ] [ ]1/2 T x 1/2 [ ] [ ] [ ] [ ]Tube by MNPT (H7 only)Valve1 ABC2C2 Teflon GRAFOIL 3/8 T x1/2 [ ] [ ] [ ] [ ]1/2 T x 1/2 [ ] [ ] [ ] [ ]Standard MaterialsTeflon Packing (H7 and H71)ValveBody and Bonnet5 StemBallCSA108 A581 303 17-4 PH SSA479-316 A276-316 316 SS Monel 3 Monel R405 Monel 400 Monel K500SG4A479-316 Monel 400 Monel K500 GRAFOIL Packing (H7 Only)ValveBody and Bonnet5 StemBallCSA105 A581 303 17-4 PH SSA479-316 A276-316 316 SS SG4A479-316 Monel 400 Monel by Tube (H7 only)

6 Dimensions inches [mm]Tube by MNPT (H7 only)Notes1. Approximate valve weight: lb [ kg].2. Valve H7 SG (Sour Gas) meets the requirements ofNACE MR0175-latest revision. 5. CS is zinc cobalt plated to prevent Greenwood Hand Valves CatalogHand Valves and Accessories 1998, Rev. 1999 Anderson Greenwood reserves the right to change product designs and specifications without and H71 Specifications3/16-inch [ mm] Orifice: 6000 and 10,000 psig [414 and 689 barg]Pressure vs. Temperature H7 Pressure and Temperature RatingsValveTeflon Packed BonnetCS6000 psig @ 200 F [414 barg @ 93 C]SS4000 psig @ 500 F [276 barg @ 260 C]Monel ValveGRAFOIL Packed Bonnet and Low EmissionsGraphite Packed Bonnet6000 psig @ 200 F [414 barg @ 93 C]CS1500 psig @ 850 F [103 barg @ 454 C]6000 psig @ 200 F [414 barg @ 93 C]SS1500 psig @1000 F [103 barg @ 538 C]6000[414]5000[345]4000[276]3000[207]20 00[138]1000[69]00[-18]100[38]200[93]300[ 149]400[204]500[260]Temperature F [ C]Pressure psig [barg]H7 HISH7 VIC, H7 VIS,and H7 VIMD enotesintersectingdata600[316]700[371]80 0[427]900[482]1000[538]H7 HIC850[454]1500[103]Pressure vs.

7 Temperature H71 Pressure and Temperature RatingsValve Teflon Packed BonnetCS,10,000 psig @ 200 F [689 barg @ 93 C]SS,4000 psig @ 500 F [276 barg @ 260 C]SG,10,000[689]8000[552]6000[414]4000[2 76]2000[138]00[-18]100[38]200[93]300[149 ]400[204]500[260]Temperature F [ C]Pressure psig [barg]Teflon Anderson Greenwood Hand Valves CatalogHand Valves and Accessories 1998, Rev. 1999 Anderson Greenwood reserves the right to change product designs and specifications without Tube Fitting Design (H7 only) Proven design performance No tube twist on makeup Low torque assembly Male nut Silver-plated to prevent galling Threads are rolled for additionalstrength Gives superior tubing support forvibration resistance Bubble-tight seal on make and remakes Fitting will hold to the burst of the tubing Makeup is industry standard 11/4turnsfrom finger tight.

8 Remake is 1/4turn from finger tightwhich brings you back to original posi-tion, then snug slightly to respring theferrule(s) into a sealing AGCO Tube option meets the requirementsof NACE MR0175-latest with single or dual ferrule design:Single Ferrule DesignOption is -( ) AT AGCO Tube1H7 and H71 Options3/16-inch [ mm] Orifice: 6000 and 10,000 psig [414 barg]BodyMale NutBack FerruleFront FerruleBodyMale NutFerruleThe Anderson Greenwood Bonnet Lockprevents accidental loosening of the bon-net-to-body seal. A high-strength, shortbonnet pin aligns a hex collar over thebonnet. A standard panel nut (GRAFOIL )or hollow-point set-screw (Teflon ) thenlocks the collar against the valve. Testsindicate the minimum torque required tobreak the collar loose is greater than thetorque required to twist off with Teflon - or GRAFOIL -packed Patent PackedBonnetLockGRAFOIL PackedBonnetLockBonnet Lock (BL)1 Dual Ferrule DesignOption is -( ) ATD Anderson Greenwood Hand Valves CatalogHand Valves and Accessories 1998, Rev.

9 1999 Anderson Greenwood reserves the right to change product designs and specifications without InformationH7 VIS 44Q SGH7 Specifications3/16-inch [ mm] Orifice: 6000 psig [414 barg]PackingV Teflon (patent protected)H GRAFOIL E Low Emissions GraphiteSeatI IntegralMaterialC CSS 316 SSM Monel (-2, -4Q, -44Q with Teflon packing only)Connections (Inlet/Outlet)2 1/4-inch FNPT x 1/4-inch FNPT2AT 1/4-inch Tube x 1/4-inch Tube24 1/2-inch MNPT x 1/4-inch FNPT3AT 3/8-inch Tube x 3/8-inch Tube3AT4Q 1/2-inch MNPT x 3/8-inch Tube4Q 1/2-inch FNPT x 1/2-inch FNPT44Q 1/2-inch MNPT x 1/2-inch FNPT46Q 3/4-inch MNPT x 1/2-inch FNPT44QA 1/2-inch MNPT x 1/2-inch FNPT Angle4AT 1/2-inch Tube x 1/2-inch Tube4AT4Q 1/2-inch MNPT x 1/2-inch Tube66Q 3/4-inch MNPT x 3/4-inch FNPTO ption/DescriptionsSG Sour Gas meets the requirements of NACE MR0175-latest revision (316 SS only)BL Bonnet Lock (patent protected) (page 21)

10 PHB Phenolic Round Black HandleSP Special Requirements - please specifyPM Panel MountAnderson Greenwood Hand Valves CatalogHand Valves and Accessories 1998, Rev. 1999 Anderson Greenwood reserves the right to change product designs and specifications without Teflon (patent protected)SeatI IntegralMaterialC CSS 316 SSConnections (Inlet/Outlet)2 1/4-inch FNPT x 1/4-inch FNPT24 1/2-inch MNPT x 1/4-inch FNPT4Q 1/2-inch FNPT x 1/2-inch FNPT44Q 1/2-inch MNPT x 1/2-inch FNPT46Q 3/4-inch MNPT x 1/2-inch FNPT44QA 1/2-inch MNPT x 1/2-inch FNPT AngleOption/DescriptionsSG Sour Gas meets the requirements of NACE MR0175-latest revision (316 SS only)BL Bonnet Lock (patent protected) (page 21)PHB Phenolic Round Black HandleSP Special Requirements - please specifyOrdering InformationH71 VIS 44Q SGH71 Specifications3/16-inch [ mm] Orifice.