Anderson Greenwood Hand Valves Catalog Hand …

1 Anderson Greenwood Hand Valves CatalogHand Valves and accessories 1998, Rev. 1999 Anderson Greenwood reserves the right to change product designs and specifications without OverviewThe H1 Series Valves are designed formaximum system reliability. The designcriteria includes repetitive bubble-tight closure, safety, and a long, trouble-freelife with easy Greenwood utilizes a replace-able soft seat that gives premiumtightness at closure, even in dirty H1 s straight-through rising plugdesign provides good regulation and highcapacity with bi-directional flow, and isalso roddable for easy Valves are standard with a varietyof end connections, seat materials, andstem packing, in SS or CS, and are avail-able with trim to meet the requirements ofNACE MR0175-latest revision. All valvesare 100 percent pressure tested withmaterial traceability of the body availableon and Benefits Replaceable soft seatallows replace-ment of the soft seat insert withoutremoving the valve from the line.

2 Itoperates in dirty service with repetitivebubble-tight shutoff. Packing below threadsprevents lubri-cant washout, thread corrosion, andkeeps solids from entering the threadarea, which can cause galling. It alsoprevents process contamination. Adjustable Teflon packingadjustseasily: loosen jam nut, tighten bushingslightly, then retighten jam packing replacement down-time and increases valve life. Dust coverprevents lubricant washoutand keeps contaminants (dirt, rain,etc.) out of bonnet assembly. Safety back seatingprevents stemblowout or accidental removal while inoperation and provides a metal-to-metalsecondary stem seal while in the fullopen position. Chrome plating of 316 SS stemprevents galling or freezing of stemthreads when similar metals mate. CS Valves use a 303 SS stem. Rolled threadsprovide additionalthread strength. The stem, bonnet, andmale NPT threads are rolled, not cut. Mirror stem finishburnished to a 16 RMS finish in the packing areaenables smooth stem operation andextends packing life.

3 Straight-through flow pathprovideshigh flow capacity, bi-directional flow,and rodding capabilities. Body-to-bonnet sealis metal-to-metalin constant compression below thebonnet threads. Prevents bonnetthread corrosion, eliminates possibletensile breakage of bonnet, and givesa reliable seal Teflon is a registered trademark of the de Nemours Seated Hand Valves H1 3/16-inch [ mm] and 1/4-inch [ mm] Orifice: 6000 and 10,000 psig [414 and 689 barg] Anderson Greenwood Hand Valves CatalogHand Valves and accessories 1998, Rev. 1999 Anderson Greenwood reserves the right to change product designs and specifications without by FNPTV alve1 ABC2D1/4 F x 1/4 [ ][ ][ ][ ] F x 1/2 F [ ][ ][ ][ ]FNPT by MNPTV alve1 ABC2D1/4 F x 1/4 [ ][ ][ ][ ] F x 1/2 M[ ][ ][ ][ ]1/2 F x 1/2 [ ][ ][ ][ ]Notes1. Approximate valve weight: lb [ kg].2. Valve Cvmaximum3/16-inch [ mm] [ mm] by MNPT (Angle)ValveABC1/2 F x 1/2 [ ][ ][ ]H1 Specifications3/16-inch [ mm] and 1/4-inch [ mm] Orifice: 6000 psig [414 barg]C , inches [mm] Anderson Greenwood Hand Valves CatalogHand Valves and accessories 1998, Rev.

4 1999 Anderson Greenwood reserves the right to change product designs and specifications without Packed,Teflon F x 1/2 F[ ][ ][ ][ ][ ]O-ring 1/2 F x 1/2 M[ ][ ][ ][ ] Notes1. Approximate valve weight:Female x Female lb [ kg].Male x Female lb [ kg].2. Valve Specifications1 4-inch [ mm] Orifice: 10,000 psig [689 barg]DEC , inches [mm] Anderson Greenwood Hand Valves CatalogHand Valves and accessories 1998, Rev. 1999 Anderson Greenwood reserves the right to change product designs and specifications without MaterialsH1 3 16-inch [ mm] and 1 4-inch [ mm] Orifice: 6000 psig [414 barg]ValveBody and Bonnet1 StemPacking2 Seat3 Teflon or Viton CSA108 A581-303 O-ring with Teflon Delrin backup ringTeflon or Viton SSA479-316 A276-316O-ring with Teflon Delrin Chrome Platedbackup ringSG4A479-316 Monel 400 Teflon Delrin Standard MaterialsH1 1 4-inch [ ] Orifice: 10,000 psig [689 barg]ValveBody and Bonnet1 StemPacking2 Seat3 Teflon or Viton CSA108 A581-303 O-ring with Teflon Delrin backup ringTeflon or Viton SSA479-316 Monel K500O-ring with Teflon Delrin backup ringTeflon or Viton SG4A479-316 Monel K500 O-ring with Teflon Delrin backup ringNotes1.

5 CS is zinc cobalt plated to prevent Teflon packing is PCTFE (Polychlorotrifluoroethylene is theexact equivalent of Kel-F ), PEEK, andTeflon seats are also SG (Sour Gas) meets the requirements ofNACE MR0175-latest Monel is a registered trademark ofInternational Nickel Delrin is a registered trademark of the de Nemours SpecificationsAnderson Greenwood Hand Valves CatalogHand Valves and accessories 1998, Rev. 1999 Anderson Greenwood reserves the right to change product designs and specifications without (P1- P2) ( )QL= CV !Gases (Where P2> .5P1) (P1- P2) P2QV= ( ) CV ( ) TGases (Where P2< .5P1)QV= ( ) P1CV (T) 01234567012 ABTurns OpenCVH1 SpecificationsFormulasFlow Characteristics 3 16-inch [ mm] and 1 4-inch [ mm] OrificeA = 1/4-inch [ mm] orifice, valve maximumB = 3/16-inch [ mm] orifice, valve maximumWhere:QL=Flow (gpm)QV=Flow (scfm)!

6 =Density of Liquid (lb/ft3)P1=Upstream Pressure (psia)P2=Downstream Pressure (psia)T=Flowing Temperature ( R)( R = F + 460)!(Water) = lb/ft3@ 60 F [16 C] Specific Gravity of Gas( of ) Air = Nitrogen = Oxygen = Helium= Hydrogen = Greenwood Hand Valves CatalogHand Valves and accessories 1998, Rev. 1999 Anderson Greenwood reserves the right to change product designs and specifications without and Temperature RatingsValve 3 16-inch [ mm] OrificeDelrin and PCTFE1 Seat6000 psig @ 200 F[414 barg @ 93 C]6000 psig @ 200 F[414 barg @ 93 C]PEEK Seat2000 psig @ 400 F[138 barg @ 204 C]Teflon Seat1000 psig @ 150 F[69 barg @ 66 C]200 psig @ 500 F[14 barg @ 260 C]Valve1 4-inch [ mm] OrificeDelrin Seat6000 psig @ 100 F[414 barg @ 38 C]1600 psig @ 200 F[110 barg @ 93 C]6000 psig @ 200 F[414 barg @ 93 C]PEEK Seat2500 psig @ 300 F[172 barg @ 149 C]Pressure vs.

7 TemperatureH1 Specifications3/16-inch [ mm] and 1/4-inch [ mm] Orifice: 6000 psig [414 barg]6000[414]5000[345]4000[276]3000[207 ]2000[138]1000[69]00[-18]100[38]200[93]3 00[149]400[204]500[260]Temperature F [ C]Pressure psig [barg]PEEK (3/16 ) [ mm]PEEK (1/4 ) [ mm]Delrin (3/16 ) [ mm]PCTFE2(3/16 ) [ mm]Delrin (1/4 ) [ mm]Teflon Denotesintersectingdata150[66]200[14]160 0[110]Note1. PCTFE (Polychlorotrifluoroethylene) is theexact equivalent of Kel-F . Anderson Greenwood Hand Valves CatalogHand Valves and accessories 1998, Rev. 1999 Anderson Greenwood reserves the right to change product designs and specifications without vs. TemperatureH1 Specifications1 4-inch [ mm] Orifice: 10,000 psig [689 barg]10,000[689]8000[552]6000[414]4000[2 76]2000[138]00[-18]100[38]200[93]300[149 ]400[204]500[260]Temperature F [ C]Pressure psig [barg]PEEKD elrin PCTFE1 DenotesintersectingdataPressure and Temperature RatingsValve1 4-inch [ mm] OrificeDelrin and PCTFE1 Seat10,000 psig @ 200 F[689 barg @ 93 C]10,000 psig @ 200 F[689 barg @ 93 C]PEEK Seat4000 psig @ 400 F[276 barg @ 204 C]Note1.

8 PCTFE (Polychlorotrifluoroethylene) is theexact equivalent of Kel-F . Anderson Greenwood Hand Valves CatalogHand Valves and accessories 1998, Rev. 1999 Anderson Greenwood reserves the right to change product designs and specifications without Specifications3 16-inch [ mm] and 1 4-inch [ mm] Orifice: 6000 psig [414 barg]Ordering InformationH1 VDS 44Q SGPackingV Teflon R Viton O-ring with Teflon backup ringSeatD Delrin (standard)K PCTFE1E PEEKV Teflon MaterialC CS S 316 SSM Monel (Teflon packed only)Special alloys available on request. Connections (Bidirectional)3 16-inch [ mm] Orifice2 1/4-inch F x 1/4-inch F22 1/4-inch F x 1/4-inch M24 1/4-inch F x 1/2-inch M4Q 1/2-inch F x 1/2-inch F44Q 1/2-inch F x 1/2-inch M44QA 1/2-inch F x 1/2-inch M (Angle)1 4-inch [ mm] Orifice (Delrin and PEEK Seats only)4QR 1/2-inch F x 1/2-inch F44QR 1/2-inch F x 1/2-inch MOptionsBL Bonnet Lock Device (patent protected) (page 21)PHB Phenolic Black Round HandleSG Sour Gas meets the requirements of NACE MR0175-latest revision (316 SS only)SP Special Requirements - please specifyNote1.

9 PCTFE (Polychlorotrifluoroethylene) is theexact equivalent of Kel-F . Anderson Greenwood Hand Valves CatalogHand Valves and accessories 1998, Rev. 1999 Anderson Greenwood reserves the right to change product designs and specifications without SpecificationsH11 4-inch [ mm] Orifice: 10,000 psig [689 barg]PackingV Teflon 1R Viton O-ring with Teflon backup ring SeatD Delrin (standard)K PCTFE2E PEEKBody MaterialsC CSS 316 SSConnections (Bidirectional)4R10 1/2-inch F x 1/2-inch F44R10 1/2-inch M x 1/2-inch FOptionsSG Sour Gas meets the requirements of NACE MR0175-latest revision (316 SS only)SP Special Requirements - please specifyNotes1. Teflon packed bonnet available in CS PCTFE (Polychlorotrifluoroethylene) is theexact equivalent of Kel-F .Ordering InformationH1 VDC 4R10 SPAnderson Greenwood Hand Valves CatalogHand Valves and accessories 1998, Rev. 1999 Anderson Greenwood reserves the right to change product designs and specifications without OverviewThe3 8-inch [ mm] general purpose,soft-seated hand valve is designed forsafe, repetitive bubble-tight closure, sim-ple maintenance, and a long, reliablecycle premium tightness at closure, evenin dirty service, a replaceable soft seat isincorporated on these Valves .

10 Thestraight-through, rising-plug design alsoprovides superior regulation and highcapacity (with bi-directional flow), and isroddable for easy valve is standard with a variety ofend connections, seat materials, and stempacking, in SS or CS, and is availablewith trim to meet the requirements ofNACE MR0175-latest revision. All valvesare 100 percent pressure tested withmaterial traceability of the body availableon and Benefits Replaceable soft seatallows replace-ment of the soft seat insert withoutremoving the valve from the line. Itoperates in dirty service with repetitivebubble-tight shutoff. Packing below threadsprevents lubri-cant washout, thread corrosion, andkeeps solids from entering the threadarea, which can cause galling. It alsoprevents process contamination. Dust coverprevents lubricant washoutand keeps contaminants (dirt, rain,etc.) out of bonnet assembly. Safety back seatingprevents stemblowout and accidental removal whilein operation.