Example: confidence
ATS1000/2000/3000/4000 installation guide
J10 RS485 system databus and enclosure tamper connections. J13 S1 Ext. Siren (1 kohm supervision), S2 Int. Siren. J14 Auxiliary power output. J16 PSTN line connection. J17 Power connections AC + Battery. J18 Serial connection (RS232). J20 MI bus devices: connector to i.e. ISDN, Audio, and GSM etc. J2, J3, J4, J15, J19 - Not fitted.
Tags:
Information
Domain:
Source:
Link to this page:
Related documents
Instruction Manual VLT AutomationDrive FC 302 90–315 kW D ...
files.danfoss.com2 RS485 serial bus connector 10 Lifting ring 3 Digital I/O and 24 V power supply 11 Mounting holes 4 Analog I/O connector 12 Cable clamp (PE) 5 USB connector 13 Ground 6 Serial bus terminal switch 14 Motor output terminals 96 (U), 97 (V), 98 (W) 7 Analog switches (A53), (A54) 15 Line power input terminals 91 (L1), 92 (L2), 93 (L3)
RP-2002(E)
www.controlfiresystems.com• ANN-BUS connector for communication with optional ... It can be connected to the trouble bus of a peripheral, such as a power supply, which is compatible with open collector cir- ... (Also requires an RS485 to RS232 converter). Page 4 of 4 — DN-60240:C1 • 06/14/2011
iCLASS SE® / multiCLASS SE® - HID Global
www.hidglobal.com1 – 10-pin Terminal connector. Recommended • Cable, 5-9 conductor (Wiegand or Clock-and-Data), 4 conductor Twisted Pair Over-All Shield and UL approved, Belden3107A or equivalent (OSDP) • Linear DC power supply • Metal or plastic junction box • Security tool (for anti-tamper screw) HID 04-0001-03 • Drill with various bits for ...
K16A-B Controller
kulplights.com16. Voltage connector- The K16A-B can be powered by 12V or 5V. (Note: orientation of Voltage and Ground is different for each side) 17. Access to the I2C bus and 8 GPIO pins for additional push buttons or other triggers a user may need. 11 14 12 15 16 2. G V 1. V G 13 17
Energy analyzer for three-phase systems
www.gavazzionline.comoutputs, the RS485, the M-Bus, Dupline or the Ethernet communication port. • Extended energy measurements, using total/partial or total/multi-tariff metering. • Flexible installation, by means of the direct connection up to 65 A or the connection of 5 A current transformers. • Extended alarm control on any available variable by