AVX | Surface Mount MLCC - Catalog

1 The Important Information/Disclaimer is incorporated in the Catalog where these specifications came from or available online at by reference and should be reviewed in full before placing any SpecificationsPART NUMBER (SEE PAGE 4 FOR COMPLETE PART NUMBER EXPLANATION)TYPICAL ELECTRICAL CHARACTERISTICS12104 DMA2AT107 Size(L x W )0101**0201040206030805120612101812 DielectricD = X5 RCapacitance ToleranceK = 10%M = 20%Failure RateA = N/APackaging2 = 7 Reel4 = 13 ReelU = 4mm TR(01005)Special CodeA = = Plated Ni and SnCapacitance Code (In pF)2 Sig. Digits + Number of ZerosVoltage4 = 4V6 = = 10VY = 16V3 = 25VD = 35V5 = 50V1 = 100 VNOTE: Contact factory for availability of Tolerance Options for Specific Part Numbers.

2 Contact factory for non-specified capacitance DESCRIPTION General Purpose dielectric for Ceramic Capacitors EIA Class II dielectric Temperature variation of capacitance is within 15% from -55 C to +85 C Well suited for decoupling and filtering applications Available in High Capacitance values (up to 100 F)**EIA 0100520 15 10 0 -5 -10 -15 -20 -60 -40 - 20 0 +20 +40 +60 +80 10,000 1,000 100 0 10012080 6040 20% Capacitance Temperature C Insulation Resistance (Ohm-Farads) Insulation Resistance vs Temperature Temperature C 121818X5R DielectricThe Important Information/Disclaimer is incorporated in the Catalog where these specifications came from or available online at by reference and should be reviewed in full before placing any DielectricSpecifications and Test MethodsParameter/TestX5R Specification LimitsMeasuring ConditionsOperating Temperature Range-55 C to +85 CTemperature Cycle ChamberCapacitanceWithin specified toleranceFreq.

3 : kHz 10% Voltage: .2 VFor Cap > 10 F, @ 120 HzDissipation Factor for 50V DC rating for 25V, 35V DC rating Max. for 16V DC rating and lowerContact Factory for DF by PNInsulation Resistance10,000M or 500M - F,whichever is lessCharge device with rated voltage for 120 5 secs @ room temp/humidityDielectric StrengthNo breakdown or visual defectsCharge device with 250% of rated voltage for 1-5 seconds, w/charge and discharge current limited to 50 mA (max)Resistance to Flexure StressesAppearanceNo defectsDeflection: 2mmTest Time: 30 seconds Capacitance Variation 12%Dissipation FactorMeets Initial Values (As Above)Insulation Resistance Initial Value x 95% of each terminal should be covered with fresh solderDip device in eutectic solder at 230 5 C for secondsResistance to Solder HeatAppearanceNo defects, <25% leaching of either end terminalDip device in eutectic solder at 260 C for 60seconds.

4 Store at room temperature for 24 2hours before measuring electrical Variation FactorMeets Initial Values (As Above)Insulation ResistanceMeets Initial Values (As Above) dielectric StrengthMeets Initial Values (As Above)Thermal ShockAppearanceNo visual defectsStep 1: -55 C 2 30 3 minutesCapacitance Variation 2: Room Temp 3 minutesDissipation FactorMeets Initial Values (As Above)Step 3: +85 C 2 30 3 minutesInsulation ResistanceMeets Initial Values (As Above)Step 4: Room Temp 3 minutesDielectric StrengthMeets Initial Values (As Above)Repeat for 5 cycles and measure after 24 2 hours at room temperatureLoad LifeAppearanceNo visual defectsCharge device with rated voltage in test chamber set at 85 C 2 C for 1000 hours (+48, -0).

5 Note: Contact factory for *optional specification part numbers that are tested at < rated from test chamber and stabilize at room temperature for 24 2 hoursCapacitance Variation Factor Initial Value x (See Above)Insulation Resistance Initial Value x (See Above) dielectric StrengthMeets Initial Values (As Above)LoadHumidityAppearanceNo visual defectsStore in a test chamber set at 85 C 2 C/ 85% 5% relative humidity for 1000 hours (+48, -0) with rated voltage from chamber and stabilize at room temperature and humidity for 24 2 hours before Variation Factor Initial Value x (See Above)Insulation Resistance Initial Value x (See Above)DielectricStrengthMeets Initial Values (As Above)

6 042418 The Important Information/Disclaimer is incorporated in the Catalog where these specifications came from or available online at by reference and should be reviewed in full before placing any DielectricCapacitance RangePREFERRED SIZES ARE SHADEDCase Size0101*0201040206030805 SolderingReflow OnlyReflow OnlyReflow/WaveReflow/WfeveReflow/WfeveP ackagingPaper/EmbossedAll PaperAll PaperAll PaperPaper/Embossed(L) (in.)( )( )( )( )( )W) (in.)( )( )( )( )( )(t) (in.)( )( )( )( )( ) (pF)100101BA150151BA220221 BAC330331 BAC470471 BAC680681 BAC1000102 BAAC1500152 BBAAC2200222 BBAAAC3300332 BBAAAC4700472 BBAAACG6800682 BBAAACGCap ( F) Size0101* ( )( )( )( )( )( )( )( )( )( )( )( )( )( )PAPEREMBOSSEDPAPER and EMBOSSED available for 01005 NOTE.

7 Contact factory for non-specified capacitance values *EIA 01005042020 The Important Information/Disclaimer is incorporated in the Catalog where these specifications came from or available online at by reference and should be reviewed in full before placing any SIZES ARE SHADEDCase Size120612101812 SolderingReflow/WaveReflow OnlyReflow OnlyPackagingPaper/EmbossedPaper/Embosse dAll Embossed(L) ( ) ( ) ( )(in.)W) ( ) ( ) ( )(in.)(t) ( ) ( ) ( )(in.) (pF)10010115 0151220221330331470471680681100010215 0 01522200222330033247004726800682 Cap ( F).

8 11040 .1515 ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( )PAPEREMBOSSEDPAPER and EMBOSSED available for 01005 NOTE: Contact factory for non-specified capacitance values*EIA 01005X5R DielectricCapacitance Range021020