BERKELEY RESIDENTIAL WATER SYSTEMS - …

1 RESIDENTIAL WATER SYSTEMS pumps , TANKS AND CONTROLSBERKELEY For Over 80 Years, BERKELEY pumps Continue to Deliver Better Performance!Since 1937, when BERKELEY pumps were first used to irrigate the fertile fields of the San Joaquin Valley of Central California, the BERKELEY name has stood for uncompromising reliability and superior ve remained true to our tradition by adding the superior technology of Pentek motors and controls to our MS and JP Series 4" submersible pumps . Pentek engineering raises the performance bar, making our submersible well product lines an even smarter choice for efficiency and quiet, dependable never relax in our dedication to finding better ways to serve our customers. MS Series 4" Submersibles feature the exceptional reliability of Pentek XE Series motors and draw up to 22% fewer amps!3-wire XE Series motors installed with a Pentek SMC-CR Control Box draw up to 22% fewer amps!

2 Pentek XE Series motors feature patented toroidal capacitors to reduce vibration and fitted with XE Series motors are factory tested to meet or exceed CSA /CUS safety Limited WarrantyBERKELEY warrants to the original consumer of the products listed below that they will be free from defects in material and workmanship for the Warranty Period from the date of original installation or manufacture as warranty will not apply to any product that has been subject to negligence, misapplication, improper installation or maintenance. In the event a three-phase submersible motor is operated with single-phase power through a phase converter, or if three-leg ambient compensated, extra-quick trip overload relays of recommended size are not used, our warranty is s only remedy and BERKELEY s only duty is to repair or replace defective products (at BERKELEY s choice).

3 Buyer agrees to pay all labor and shipping charges associated with this warranty and to request warranty service through the installing dealer as soon as a problem is discovered. If warranty service is requested more than 30 days after the Warranty Period has ended, it will not be honored. Warranty is not SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL OR CONTINGENT DAMAGES FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL NOT EXTEND BEYOND THE WARRANTY PERIOD PROVIDED states do not permit the exclusion or limitation of incidental or consequential damages or the placing of limitations on the duration of an implied warranty; therefore the limitations or exclusions herein may not apply. This warranty sets forth specific legal rights and obligations; however, additional rights may exist, which may vary from state to all previous publications.

4 ProductWarranty PeriodWater system Products jet pumps , small centrifugal pumps , submersible pumps and related accessories12 months from date of original installation;Extended Warranty available through Pentair Pro Dealer program PRO-SOURCE Composite Fibrewound Pressure Tanks or PRO-SOURCE Composite Contact Tanks5 years from date of original installationPRO-SOURCE Steel Pressure Tanks PRO-SOURCE Plus Steel Pressure Tanks5 years from date of original installationPRO-SOURCE Epoxy-Lined Air-Over- WATER Tanks3 years from date of original installationPRODUCT SELECTION GUIDE ..5 74" SUBMERSIBLE PUMPSMS Series 5 and 7 GPM TrimLine 4" Stainless Steel ..8 13MS Series 10, 15, 20, 30 and 50 GPM 4" Stainless Steel ..14 25JP Series 5 and 7 GPM TrimLine 4" Composite ..26 31JP Series 10, 15, 20 and 30 GPM 4" Composite ..32 40K Series 5, 7, 10 and 20 GPM 4" Composite ..41 47KS Series 10 and 20 GPM 4" Stainless Steel.

5 48 Plus D 5770 GPM 4" Submersible Pump ..58 6175 and 90 GPM 4" High-Flo Submersible ..62 654" x 6" Submersible Motor Adapter ..66 MOTORS AND CONTROLSP entek XE Series 4" Submersible Motors ..67 69 Submersible Motor Controls ..70 74 Single-Phase Pump Protection ..75 77 Pentek Intellidrive ..78 80 Pentek Intellikit ..81 82 Pentek Intellidrive XL ..83 84 Pentek XE-6 6" Submersible Motors and Controls ..85 87 Hitachi 6" Submersible Motors ..88 89 SHALLOW WELL JET PUMPSC J Self-Priming ..90 92HN Self-Priming Cast 95SN Self-Priming Cast Iron ..96 98FN Self-Priming Cast Iron ..99 101PN Self-Priming Corrosion-Resistant ..102 104FH Self-Priming Cast Iron ..105 107 Jet Tank Packages ..108 110 CONVERTIBLE DEEP WELL JET pumps HL Self-Priming Cast Iron ..111 114SL Self-Priming Cast 118FL Self-Priming Cast Iron ..119 121PL Corrosion-Resistant ..122 124 HMS Vertical Multi-Stage.

6 125 128 DMC Series Horizontal Multi-Stage ..129 130MS Vertical Multi-Stage ..131 133 SSJ Vertical Single-Stage ..134 136(Continued on next page)Table of Contents3 IMPORTANT NOTESS pecifications and/or materials are subject to change without are for estimating purposes are tested and rated in accordance with WATER SYSTEMS Council trademarks and logos are owned by Pentair plc or its affiliates. All other third party registered and unregistered trademarks and logos are the property of their respective PUMPSI ntelliboost R Series Multi-Stage VFD Booster Pump ..137 138HP/HPS High-Pressure Booster ..139 143 JET PACKAGES AND ACCESSORIES ..144 147 TANKSPro-Source Composite Fibrewound Pressure ..148 150 Pro-Source Composite Fibrewound Contact and Sideport Contact ..151 152 Pro-Source Plus Steel Pressurized ..153 155 Pro-Source Steel Pressurized ..156 159 Pro-Source Epoxy Lined.

7 160 161 CENTRIFUGAL AND UTILITY pumps Pro-Storm DSS Series Self-Priming Multi-Stage ..162 163DS2 Series ..164 166DS3 Pro-Storm ..167 169PD Self-Priming Corrosion-Resistant ..170 171D Self-Priming Cast Iron ..172 177CC Straight Centrifugal Cast Iron ..178 180 DPC Self-Priming Cast Iron ..181 182J/JB General Purpose Cast Iron ..183 186 Pro-Source Pumper ..187-188 EDD/EEDD Engine-Driven Self-Priming ..189 190 GENERAL INFORMATION WATER SYSTEMS Product Nomenclature ..191 192 Sizing Home WATER SYSTEMS ..193 Pipe Friction Loss Charts ..194 195 Cable Selection 4" Submersible Motors ..196 197 Table of Contents4 PENTEK MOTORS AND CONTROLSPRODUCT TYPE4" SUBMERSIBLE MOTORSSUBMERSIBLE MOTOR CONTROLS6" SUBMERSIBLE MOTORSCONSTANT PRESSURE CONTROLLERSINGLE-PHASE MOTOR PROTECTORSAPPLICATIONW ater SYSTEMS for RESIDENTIAL , industrial, commercial, multiple housing and farm clean WATER useWater SYSTEMS for RESIDENTIAL , industrial, commercial, multiple housing and farm clean WATER useWater SYSTEMS for RESIDENTIAL , industrial, commercial, multiple housing and farm clean WATER useResidential, commercial and irrigation constantpressure systemsWater SYSTEMS for RESIDENTIAL , industrial, commercial.

8 Multiple housing and farm clean WATER useDESCRIPTIONS ingle- and three-phase 4" submersible high thrust motorSingle-phase motor controls for submersible applicationsSingle- and three-phase 6"submersible motorConstant pressure controller for below and above ground applicationsSingle-phase motor protectorsfor submersible applicationsMATERIALSS tainless steel constructionNEMA 3R EnclosureStainless steel and epoxy-coated cast ironNEMA 1, NEMA 3R, and NEMA 4X Enclosures AvailableNEMA 3R EnclosurePERFORMANCEC apacityN/AN/AN/AN/AN/AHeadN/AN/AN/AN/AN/ ASUCTION/DISCHARGEN/AN/AN/AN/AN/AHORSEPO WER1/2 to 10 HP1/2 to 15 HP5 to 50 HP1/2 to 150 HP1/3 to 15 HPSERIESXESMCXE-6 PID, XLSPPP roduct Selection Guide5S5620 WSProduct Selection GuidePRODUCT TYPESELF-PRIMING SHALLOW WELL AND CONVERTIBLE JETVERTICAL SINGLE & MULTI-STAGE AND SELF-PRIMING HORIZONTAL MULTI-STAGE DEEP WELL JETSMALL, STRAIGHT CENTRIFUGALSELF-PRIMING CENTRIFUGALHIGH PRESSURE BOOSTER PUMPSAPPLICATIONR esidential and general WATER supply SYSTEMS booster, and light irrigationGeneral WATER supply, booster and light irrigation for 2", 3" and 4" or larger WATER wellsGeneral purpose, process, booster and liquid transferLawn sprinkling, light irrigation, general dewatering and sump drainage, liquid transferGeneral purpose booster, warm and cold WATER wash down, cleaningDESCRIPTIONT hreaded connectionsMotor-driveMechanical sealBack pull-out designConvertible to deep well useThreaded connectionsMotor-driveMechanical sealsThreaded connectionsMotor-drive.

9 ODP and TEFCM echanical seals standard and high temperatureBack pull-out design4-position dischargeFast primingThreaded connectionsMotor- and engine-drivePortable or permanent installation Mechanical sealsBack pull-out designThreaded connectionsMotor-driveMechanical sealsODP and TEFC motorsMATERIALSCast iron or fiberglass reinforced thermoplastic with thermoplastic impellersCast iron with thermoplastic impellersCast iron with bronze (high temperature) or thermoplastic impellersCast iron or fiberglass reinforced thermoplastic with bronze, cast iron or thermoplastic impellersSignature 2000 Stainless steel or cast iron construction with thermo-plastic impel-lers/diffusersPERFORMANCEC apacityTo 45 GPMTo 55 GPMTo 260 GPMTo 240 GPMTo 40 GPMHeadTo 160 325 140 160 690 " to 1-1/4"3/4" to 1"1-1/4" suction, 1" drive1"1-1/4" to 2-1/2"1" to 2"1" to 3"1" to 2-1/2"3/4" to 1-1/4"1" to 1-1/2"HORSEPOWER1/3 to 1-1/2 HP1/2 to 2 HP1/3 to 5 HP1/2 to 5 HP1/2 to 3 HPSERIESSN, HN, FN, PN,SL, HL, FL, PLSSJ, MS, HMSJ/JB, CCD, DS3, EDD, DPC, PDHP, HPS6S5620 WSProduct Selection Guide6" STAINLESS STEEL SUBMERSIBLE TURBINE4" SUBMERSIBLEWATER SYSTEMS TANKSPRO-SOURCE COMPOSITEPRESSURIZED FIBREWOUNDPRO-SOURCEPRO-SOURCE PLUSPRESSURIZED STEELPRO-SOURCE COMPOSITE CONTACT & SIDEPORT CONTACT AIR OVER WATER STEELG eneral WATER supply.

10 Irrigation, booster, sump, circulation, dewateringGeneral WATER supply, booster, sump, circulation, and irrigationGeneral WATER storage and transferGeneral WATER storage and transferGeneral WATER storage and transferCrimped and threaded connectionsCompletely submerged sealed motor coupled to pumpThreaded connectionsCompletely submerged sealed motor 2 and 3 wirePre-pressurized composite well tank CSA Classified toANSI/NSF 61 Field serviceablePre-pressurized steel well tank CSA Classified to ANSI/NSF 61 Air over WATER standard tankAll stainless steel constructionSignature 2000 Stainless steel and composite construction with thermoplastic impellers/diffusers70 GPM Series Cast iron bowls with thermoplastic impellers75 GPM and 90 GPM High-Flo SeriesPressure vessel: polyethyleneExterior: continuous, overlapping fiberglass strands, sealed with high-grade epoxy resin, then oven-curedPressure vessel: steel Exterior: baked-on powderpolyester paintWater separator: PVCP ressure vessel: steelExterior: baked-on powder polyester paint Interior: baked-on epoxy paintTo 365 GPMTo 1400 125 GPMTo 1900 Capacity: 14 - 119 gallons Drawdown: - gallonsMaximum operating pressure:125 PSIP hysical Capacity: 2 - 119 gallons Drawdown: - gallonsMaximum operating pressure:125 PSIP hysical Capacity: 30 - 264 gallonsDrawdown: 7 - 50 gallonsMaximum operating pressure:100 PSI3" to 4"1-1/4" to 2"1" to 1-1/4" NPT3/4" to 1-1/4" NPT1-1/4" NPT1 to 60 HP1/2 to 10 HPN/AN/AN/ABerkeleySignature 2000 Series, 70 GPM Series and 90 GPM SeriesPro-Source CompositePro-Source PlusPro-Source Composite7S5620 WSFEATURESP roven Staging system .