Transcription of Bore Key Sheets - dpk3n3gg92jwt.cloudfront.net
1 Standard Inch Series Bores And KeywaysDATA SHEET DS103 REV. 03 Finished Straight Bores For Standard Finished Straight BoresAGMA Class 1 Clearance FitFor Standard AGMA Interference FitNominalNominal ShaftBore Dia. EqualsShaftBoreKeywayKeywayDiameterNomin al ShaftBoreKeywayKeywayDiameterDiameter(Wi dth x Depth)RadiusOver to IncludingDiameter minusTolerance(Width x Depth)Radius1 / .5011/8 x 1/161/649/16 to 7 +.00053/16 x 3/321/649 / .56357/8 to 1-1 +.00051/4 x 1/81/645 / .6263/16 x 3/321/641-1/4 to 1-3 +.00055/16 x 5/321/323 / .7511-3/8 to 1-1 +.00053/8 x 3/161/3213 / .81351-1/2 to 1-3 +.0017 .8761-3/4 to 2-1 +.0011/2 x 1/41/3215 / .93851/4 x 1/81/642-1/4 to 2-3 +.0015/8 x 5/161 / to +.0013/4 x 3/81/161-1 / to 3-1 +.00151-1 / to 3-3 +.00157/8 x 7/161/161-3 / to +.00151 x 1/21/161-1 / to 4-1 +.00151-5 / x 5/321/324-1/2 to +.00151-1/4 x 5/81/81-3 / to 5-1 +.00151-7 / x 3/161/325-1/2 to +.00151-1/2 x 3/41/81-1 / to 6-1 +.
2 0021-5 / to +.0021-3/4 x 3/41/81-11 / to 7-1 +.0021-3 / to +.0022 x 3/41/81-7 / x 1/41/328 to +.0021-15 / to +.0022-1/2 x 7/81 / to +.0022-1 / to +.0023 x 13/162-3 / to +.00252-1 / to +.00253-1/2 x 1-1/43/162-3 / x 5/161/1614 to +.00252-7 / to +.00254 x 1-1/2(Note 3)2-1 / to +.00252-5 / to +.00252-3 / to +.00255 x 1-3/4(Note 3)2-7 / x 3/81/1619 to +.00252-15 / / / Screw Sizes For3-3 / Fit Bores3-1 / / x 7/161/16 Hub SizeABSet Screw3-7 / "-20 UNC3-1 / / / / x 1/21/1612 "-16 / F or 15 / F or 20 / F or 25 / F or 30 "-13 UNC4-3 / x 5/81/83 F or 35 "-11 / F or 40 / F or 45 "10 UNC5-3 / :5 ) Unless specified by the customer:2) Actual shaft fit will vary depending on- Series S couplings supplied with actual shaft diameters. clearance fit bores with set ) keyway fillet radius to be specified by Series F couplings supplied with4) All dimensions per AGMA 9002-A86 interference fit bores without set screwscommercial standards.
3 Non standard bores and over the available upon Series EL couplings supplied with clearance fit bores with set Metric Bores And KeywaysDATA SHEET DS103 REV. 03 Bore FilletKey(D)Tol. WidthDepth RadiusSize Over To/Incl.(K)(H)(R)(Ref)68+. x +.083 x +. x 41217+. x +.096 x 61822+. x x 73038+. x x +.1514 x x 105865+. x +.220 x x x 148595+. +.2025 x x x x 18130150+. x x +.3045 x 25180200+. x x x 32250260+. +.356 x +.4063 x x 36315330+. x x +.5090 x 45400440+. x x 50 tolerances per BS 4500H7 width tolerances perBS 4235 P9 depth and fillet radiusper BS dimensions are in shaft fit will vary dependingon actual shaft diameters.
