CAMPUSplastics | datasheet Stanyl® TW341

1 12-5-28 8:28 CAMPUS plastics | datasheet Stanyl TW341 1 7 + TW341 /DSM+Engineering+Plastics/50/ae5bc 256 This datasheet of Stanyl TW341 from DSM Engineering Plastics is provided by the international plastics database CAMPUS. CAMPUS is organized by a group of leading international resin producers, who have agreed to test their material according to uniformconditions, based on ISO standards (ISO 10350, ISO 11403), in order to offer comparable data to the market. Stanyl TW341 | PA46 | DSM Engineering PlasticsProduct TextsHeat Stabilized, LubricatedISO 1043 PA46 Welcome to the astonishing world of Stanyl Mechanical propertiesdry / condUnitTest StandardTensile Modulus3300 / 1000 MPaISO 527-1/-2 Yield stress100 / 55 MPaISO 527-1/-2 Yield strain10 / 20%ISO 527-1/-2 Nominal strain at break40 / >50%ISO 527-1/-2 Tensile creep modulus (1000h)* / 550 MPaISO 899-1 Charpy impact strength (+23 C)N / NkJ/m!

2 ISO 179/1eUCharpy impact strength (-30 C)N / NkJ/m!ISO 179/1eUCharpy notched impact strength (+23 C)10 / 35kJ/m!ISO 179/1eACharpy notched impact strength (-30 C)4 / 4kJ/m!ISO 179/1eAThermal propertiesdry / condUnitTest StandardMelting temperature (10 C/min)295 / * CISO 11357-1/-3 Glass transition temperature (10 C/min)75 / * CISO 11357-1/-2 Temp. of deflection under load ( MPa)190 / * CISO 75-1/-2 Temp. of deflection under load ( MPa)280 / * CISO 75-1/-2 Vicat softening temperature (50 C/h 50N)290 / * CISO 306 Coeff. of linear therm. expansion (parallel)85 / *E-6/KISO 11359-1/-2 Coeff. of linear therm. expansion (normal)110 / *E-6/KISO 11359-1/-2 Burning Behav. at mm nom. / *classIEC 60695-11-10 Thickness / *mmIEC 60695-11-10UL recognitionUL / *--Burning Behav.

3 At thickness hV-2 / *classIEC 60695-11-10 Thickness / *mmIEC 60695-11-10UL recognitionUL / *--Oxygen index27 / *%ISO 4589-1/-2 Electrical propertiesdry / condUnitTest StandardRelative permittivity (100Hz) / 22-IEC 60250 Relative permittivity (1 MHz) / 60250 Dissipation factor (100Hz)70 / 8700E-4 IEC 60250 Dissipation factor (1 MHz)260 / 1200E-4 IEC 60250 Volume resistivity1E13 / 1E7 Ohm*mIEC 60093 Surface resistivity* / 1E13 OhmIEC 60093 Electric strength25 / 15kV/mmIEC 60243-1 Comparative tracking index400 / --IEC 60112 Other propertiesdry / condUnitTest StandardWater / *%Sim. to ISO 62 Humidity / *%Sim. to ISO 62 Density1180 / -kg/m"ISO 1183 Material specific propertiesdry / condUnitTest StandardViscosity number185 / *cm"/gISO 307, 1157, 1628 Rheological calculation propertiesValueUnitTest StandardDensity of melt978kg/m"-Thermal conductivity of (m K)-Spec.

4 Heat capacity melt2800J/(kg K)-CAMPUS plastics | datasheet Stanyl TW34112-5-28 8:28 CAMPUS plastics | datasheet Stanyl TW341 2 7 + TW341 /DSM+Engineering+Plastics/50/ae5bc 256 Spec. heat capacity melt2800J/(kg K)-Eff. thermal !/s-Diagrams 12-5-28 8:28 CAMPUS plastics | datasheet Stanyl TW341 3 7 + TW341 /DSM+Engineering+Plastics/50/ae5bc 256 12-5-28 8:28 CAMPUS plastics | datasheet Stanyl TW341 4 7 + TW341 /DSM+Engineering+Plastics/50/ae5bc 256 12-5-28 8:28 CAMPUS plastics | datasheet Stanyl TW341 5 7 + TW341 /DSM+Engineering+Plastics/50/ae5bc 256 CharacteristicsProcessingInjection MoldingDelivery formPelletsAdditivesLubricants, Release agentSpecial CharacteristicsPlatable, Heat stabilized or stable to heatRegional AvailabilityNorth America, Europe, Asia PacificOther text informationInjection moldingInjection Molding RecommendationsDisclaimer All information supplied by or on behalf of DSM in relation to itsproducts, whether in the nature of data, recommendations or otherwise,is supported by research and, in good faith, believed reliable, but DSMassumes no liability and makes no warranties of any kind, express orimplied, including, but not limited to.

5 Those of title, merchantability,fitness for a particular purpose or non-infringement or any warrantyarising from a course of dealing, usage, or trade practice whatsoeverin respect of application, processing or use made of the aforementionedinformation or product. The user assumes all responsibility for the useof all information provided and shall verify quality and other properties or12-5-28 8:28 CAMPUS plastics | datasheet Stanyl TW341 6 7 + TW341 /DSM+Engineering+Plastics/50/ae5bc 256any consequence from the use of all such values are indicative only and are not to be construed as beingbinding CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes noliability for the system to be free of errors.

6 Any decision about the application of materials must be double checked with the producer of thismaterial. CAMPUS is a Registered trademark of CWFG mbH, Frankfurt/Main, 199112-5-28 8:28 CAMPUS plastics | datasheet Stanyl TW341 7 7 + TW341 /DSM+Engineering+Plastics/50/ae5bc 256