Chapter 296-307 WAC Safety Standards for Agriculture

1 Chapter 296-307 WAC Introduction Safety Standards for Agriculture _____ Chapter 296-307 WAC Safety Standards for Agriculture (Form Number F414-030-000) LAST UPDATED 04/23/2018 This book contains rules for Safety Standards for Agriculture , as adopted under the Washington Industrial Safety and Health Act of 1973 ( Chapter RCW). The rules in this book are effective April 2018. A brief promulgation history, set within brackets at the end of each section, gives statutory authority, administrative order of promulgation, and date of adoption of filing. TO RECEIVE E-MAIL UPDATES: Sign up at TO PRINT YOUR OWN PAPER COPY OR TO VIEW THE RULE ONLINE: Go to DOSH CONTACT INFORMATION: Physical address: 7273 Linderson Way Tumwater, WA 98501-5414 (Located off I-5 Exit 101 south of Tumwater.) Mailing address: DOSH Standards and Information PO Box 44810 Olympia, WA 98504-4810 Telephone: 1-800-423-7233 For all L&I Contact information, visit Also available on the L&I Safety & Health website: DOSH Core Rules Other General Workplace Safety & Health Rules Industry and Task-Specific Rules Proposed Rules and Hearings Newly Adopted Rules and New Rule Information DOSH Directives (DD s) See Chapter 296-307 WAC Table of Contents Safety Standards for Agriculture _____ Page i Table of Contents i-vNationally Recognized Standards found in Chapter 296-307 WAC i-viField Operations and General Requirements General and Educational Requirements Part A WAC 296-307 -003 through WAC 296-307 -024 How this Chapter is divided How does an employer apply for a varianceAccident Prevention Program; First-aid Requirements.

2 Part B Safe Place Standard WAC 296-307 -030 through WAC 296-307 -045 What are the required elements of an accident prevention program What are the requirements of the safe place standardHand Tools Part C WAC 296-307 -050 Hand ToolsLadders, Bulk Storage, Pits, and Trenches Part D WAC 296-307 -055 through WAC 296-307 -061 Ladders What requirements apply to working around bins, bunkers, hoppers, tanks, pits, and trenchesVehicle and Farm Field Equipment Part E WAC 296-307 -065 through WAC 296-307 -076 How must slow-moving vehicles be marked How must farm field equipment be guardedRollover Protective Structures (ROPS) for Tractors Part F WAC 296-307 -080 through WAC 297-307-090 Rollover protective structures (ROPS) for tractors What requirements apply to overhead protection for operators of agricultural and industrial tractorsField Sanitation Part G WAC 296-307 -095 through WAC 296-307 -09518 Field sanitation What toilet facilities must an employer provideOutdoor heat exposure Part G-1 WAC 296-307 -097 through WAC 296-307 -09760 Outdoor heat exposure Information and trainingChapter 296-307 WAC Table of Contents Safety Standards for Agriculture _____ Page ii Personal Protective Equipment (PPE) Part H WAC 296-307 -100 WAC 296-307 -10025 Personal protective equipment What instruction on personal protective equipment must an employer give to employees Pesticides (Worker Protection Standard)

3 Part I WAC 296-307 -107 through WAC 296-307 -13055 Federal worker protection standard--Washington state department of Agriculture Emergency assistance-- Standards for pesticide handlers--40 CFR, Pesticides Recordkeeping Part J WAC 296-307 -145 through WAC 296-307 -14510 Pesticides recordkeeping Sample pesticide storage record Cholinesterase Monitoring Part J-1 WAC 296-307 -148 through WAC 296-307 -14845 Scope and summary Implementation plan Working Near Overhead Lines Part K WAC 296-307 -150 through WAC 296-307 -15012 Employees working near overhead lines When must an employer notify the utility of employees working near overhead lines Temporary Labor Camps Temporary Worker Housing and Cherry Harvest Camps Part L WAC 296-307 -161 through WAC 296-307 -16190 Temporary worker housing and cherry harvest camps Disease prevention and control Cherry Harvest Camps (Effective until 01/01/2016) Part L-1 WAC 296-307 -163 through WAC 296-307 -16395 Cherry harvest camps Disease prevention and control Indoor Operations Guarding Tools and Equipment, Farm Shops, Materials Part M Handling WAC 296-307 -18005 through WAC 296-307 -232 How must fan blades be guarded What requirements apply to conveyors Sanitation for Indoor Workplaces Part N WAC 296-307 -240 through WAC 296-307 -24036 Sanitation for fixed, indoor workplaces When must an employer have a vermin control program Chapter 296-307 WAC Table of Contents Safety Standards for Agriculture _____ Page iii Walking Working Surfaces; Fixed Industrial Stairs.

4 Part O Aerial Manlifts WAC 296-307 -250 through WAC 296-307 -27010 Walking working surfaces, elevated walkways, and platforms What requirements apply to using aerial manlift equipment Guarding Power Transmission Machinery Part P WAC 296-307 -280 through WAC 296-307 -30021 Guarding power transmission machinery What additional guarding requirements apply to farmstead equipment Control of Hazardous Energy (Lockout-Tagout) Part Q WAC 296-307 -320 through WAC 296-307 -32041 Control of hazardous energy (lockout-tagout) What requirements apply to lockout/tagout during shift changes Safety Color Coding; Accident Prevention Signs and Tags Part R WAC 296-307 -330 through WAC 296-307 -33011 Safety color coding; accident prevention signs and tags What are the proper uses of accident prevention tags Fire Protection; Exit Routes Part S WAC 296-307 -340 through WAC 296-307 -35018 Portable fire extinguishers What are the requirements for a fire prevention plan Electrical Part T WAC 296-307 -360 through WAC 296-307 -38018 Electrical How must electrical protective devices be maintained and used Specialized Operations Hazardous Materials-Anhydrous Ammonia Part U-1 WAC 296-307 -400 through WAC 296-307 -40039 Anhydrous ammonia What requirements apply to electrical equipment and wiring Hazardous Materials-Liquefied Petroleum Gas Part U-2 WAC 296-307 -410 through WAC 296-307 -44025 Storage and handling of liquefied petroleum gases What fire protection must be provided at LP-gas service stations Other Hazardous Materials-Dipping and Coating Operations Part U-3 (Dip Tanks)

5 WAC 296-307 -445 through WAC 296-307 -465 Scope Definitions Chapter 296-307 WAC Table of Contents Safety Standards for Agriculture _____ Page iv Welding Part V WAC 296-307 -475 through WAC 296-307 -50029 Welding, cutting, and brazing What requirements apply to welding mercury Powered Industrial Trucks (Forklifts) Part W WAC 296-307 -520 through WAC 296-307 -52047 Powered industrial trucks (forklifts) What requirements apply to maintaining powered industrial trucks Rim Wheel Servicing Part X WAC 296-307 -530 through WAC 296-307 -53017 Rim wheel servicing How can an employer order the OSHA charts Lighting Part Y-3 WAC 296-307 -570 through WAC 296-307 -57005 Lighting rule Provide and maintain adequate lighting Environmental Tobacco Smoke in the Office Part Y-4 WAC 296-307 -590 through WAC 296-307 -59005 Environmental tobacco smoke in the office Prohibit tobacco smoke in your office work environment Respirators Part Y-5 WAC 296-307 -594 through WAC 296-307 -622 Scope Definitions Respiratory Hazards Part Y-6 WAC 296-307 -624 through WAC 296-307 -628 Scope Definitions Hearing Loss Prevention (Noise)

6 Part Y-7 WAC 296-307 -630 through WAC 296-307 -640 Scope Noise definitions Chapter 296-307 WAC Table of Contents Safety Standards for Agriculture _____ Page v Confined Spaces Part Y-8 WAC 296-307 -642 through WAC 296-307 -656 Scope Definitions. Emergency Response Part Y-10 WAC 296-307 -704 through WAC 296-307 -70480 Scope Definitions Chapter 296-307 WAC List of Standards Safety Standards for Agriculture _____ List of Standards Page i Nationally Recognized Standards found in Chapter 296-307 WAC ACGIH s Industrial Ventilation: A Manual of Recommended Practice (22nd ed., 1995) 307-45010 ANSI / SAE J800, April 1986 307-08012(2) ANSI , Safety Code for Building Construction 307-33003(5) ANSI (R 1970), Practice for Industrial Lighting 307-52021(1) ANSI , Identification of Piping Systems 307-48039(2) ANSI , Section Bursting Safety Factor 307-27005(6) ANSI B , American National Standard Specifications for Welded and Steamless Steel Pipe, for pipe 307-25027(5) ANSI B , Compressed Gas Cylinder Valve Outlet and Inlet Connections 307-48003(2) ANSI , conveyor construction, operation and maintenance 307-232 ANSI , Section 2, Industrial Gas and Air Piping Systems, Code for Pressure Piping, 307-48033(1) ANSI addenda , Refrigeration Piping Code 307-40021(3) ANSI , Powered Industrial Trucks 307-52005(2) ANSI and 1970 307-19006(6) 307-22006(1) ANSI C1-1971 and 1972, Article 310 307-360(3) 307-36418(2)

7 ANSI , Underwriters Laboratories, Safety Standard for Transformer-Type Arc-Welding Machines 307-49001 ANSI , American National Specifications for Structural Steel 307-25027(5) ANSI and ASTM B88-11969, Type K Specifications for Seamless Water Tube 307-41021(4) 307-41039(2) ANSI (ASTM, B241-1969), Aluminum Alloy Pipe, 307-41021(1) ANSI for the Storage and Handling of Anhydrous Ammonia 307-40011(1) ANSI American National Rule Specification for Personal Noise Dosimeters 307-63405 ANSI American National Standard Specification for Sound Level Meters 307-63405 ANSI American National Standard Maximum Permissible Ambient Noise Levels 307-63635 ANSI American National Standard Specification for Audiometers 307-63635 Chapter 296-307 WAC List of Standards Safety Standards for Agriculture _____ List of Standards Page ii Nationally Recognized Standards found in Chapter 296-307 WAC ANSI of Marking Portable Compressed Gas Containers to Identify the Material Contained 307-41015(3) ANSI , Safety in Welding and Cutting, published by the American Welding Society 307-50011(5) ANSI National Standard Practice for Occupational and Educational Eye and Face Protection 307-10010 307-50003(10)

8 ANSI/AIHA , American National Standard for Respirator Fit Testing Methods 307-60605 ANSI , Practices for Ventilation and Operation of Open-Surface Tanks 307-45010 ANSI , Fundamentals Governing the Design and Operation of Local Exhaust Systems 307-45010 ANSI 1998, Emergency Eyewash and Shower Equipment 307-03930 API Standard 620, Recommended Rules for Design and Construction of Large Welded Low-Pressure Storage Tanks 307-40031(1) API-ASME code, all editions 1050, 1952, 1956, 1959, 1962, 1965, 1968 and 1971 (Division 1) 307-41011(3) 307-41025(3) 307-41025(5) 307-42003 307-42505(1) API-ASME, LP-gas installations 307-43521(5) ASME code, 1949 edition: (Par. U-68, and U-69, 1949 and Par U-200, U-201) (Division 1) 307-42505(1) 307-44003 ASME, Construction of Unfired Pressure Vessels, Section VIII, Division 1, Boiler and Pressure Vessel Code, 1968 edition 307-43521(5) ASME, Rules for Construction of Unfired Pressure Vessels, Section VIII, Division 1, Boiler and Pressure Vessel Code, 1968 edition 307-41011 ASME, Section VIII of the ASME Boiler Construction Code, Unfired Pressure Vessel Code, 1952, 1956, 1962, 1965, 1968 and 1971 editions 307-40013 ASTM A-53-1969, Schedule 40, Grade B Electric Resistance Welded and Electric Flash Welded Pipe 307-41021(3) Code for Unfired Pressure Vessels for Petroleum Liquids and Gases, 1951 edition with 1954 Addenda 307-41011(3) Compressed Gas Association and Rubber Manufacturers Association, Specification for Rubber Welding Hose, 1958 307-48051(1)

9 Chapter 296-307 WAC List of Standards Safety Standards for Agriculture _____ List of Standards Page iii Nationally Recognized Standards found in Chapter 296-307 WAC Compressed Gas Association Regulator Connection Standards , 1958 307-48049(4) 307-48053(1) Compressed Gas Association, Standard Hose Connection Specifications, 1957 307-48049(5) 307-48051(4) EPA's, National Interim-Primary Drinking Water Regulations 307-09512(9) EPA Product Noise Labeling, 40 CFR, Part 211 307-63215 Federal Insecticide, Fungicide, and Rodenticide Act 307-11005 Fertilizer Institute for the Storage and Handling of Agricultural Anhydrous Ammonia, M-1 307-40011 FIFRA section 14 (b)(4) 307-11015(3) Joint Code of the American Petroleum Institute and the American Society of Mechanical Engineers (API-ASME Code) 1951 edition 307-40013 Joint Rubber Manufacturers Association and the Fertilizer Institute Hose Specifications for Anhydrous Ammonia 307-40023(1) National Highway Traffic Safety Administration (NHTSA) publications entitled Demounting and Mounting Procedures for Truck/Bus Tires and Multi-Piece Rim Matching Chart 307-53003 NEMA (National Electrical Manufacturers Association )EW-1-1962, Electric Arc-Welding Apparatus 307-49001 NFPA No.

10 10A-1970, pamphlet 307-34009(6) NFPA No. 13, Automatic Sprinkler System 307-35009(6) NFPA No. 30-1996, Flammable and Combustible Liquids Code 307-52019(1) NFPA No. 34-1995, Standard for Dipping and Coating Processes Using Flammable or Combustible Liquids 307-45010 NFPA No. 51B, 1962, Standard for Fire Prevention in Use of Cutting and Welding Processes 307-49501 NFPA No. 58-1969, Storage and Handling of Liquefied Petroleum Gases 307-52019(2) NFPA No. 70-1973, National Electrical Code 307-360(3) 307-36010(2) 307-36418(2) 307-37209(3) OSHA 29 CFR (e)(15) 307-34018(10) OSHA CFR Protective Frames for Wheel Type Agricultural Tractors 307-08009 307-085(3) Chapter 296-307 WAC List of Standards Safety Standards for Agriculture _____ List of Standards Page iv Nationally Recognized Standards found in Chapter 296-307 WAC OSHA Title 29 of the Code, section 653(b)(1) 307-11015(4) Primary Drinking Water Regulations published in 40 CFR, Part 141, and 40 CFR 307-24006 SAE Standard J167 (1971) 307-08009 SAE Standard J334 (July 1970), overhead protection for dozers and loaders 307-08009 307-090(3) State of Washington motor vehicles laws 307-07011 Department of Agriculture Wood Handbook, No.