Example: bachelor of science
Checklists to be Used - EMSD
bonding connections. _____ (ii) Main equipotential bonding conductors effectively connected to main water pipes, main gas pipes, other services pipes/ducting and exposed metallic parts of structural framework. _____ (iii) Supplementary equipotential bonding effectively provided between exposed conductive parts and extraneous conductive parts.
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
Code of Practice for the Electricity (Wiring) Regulations ...
www.emsd.gov.hkof the Wiring Regulations. However, those installations or parts of installation which comply with 2015 edition of this CoP is also deemed to have met the requirements of the Wiring Regulations provided that they: (a) completed and connected to electricity supplies before 31 …
Code of Practice for Energy Efficiency of Lighting ...
www.emsd.gov.hkThe set of comprehensive Building Energy Codes cover this Code, the Codes of Practice for Energy Efficiency of Air Conditioning Installations, Electrical Installations, and Lift & Escalator Installations, and the Performance-based Building Energy Code. Amendment to 1998 Edition
CODE OF PRACTICE - EMSD
www.emsd.gov.hk5.2 Bleed-off Control and Reuse of Bleed-off Water 21 6. Notices and Labels 23 7. Risk Management of a Cooling Tower System 24 7.1 General 24 ... Biocide : A physical or chemical agent that kills bacteria and other microorganisms. Biodispersant : A chemical compound added to the water inside cooling tower
Technical Guidelines on Charging Facilities for Electric ...
www.emsd.gov.hk10. For Mode 1 charging, an AC charging current is delivered via a standard socket outlet e.g. BS1363 13A and a charging cable without communication function to the on-board charger of the EV. The presence of a residual current device (RCD) is a must on the supply side of the fixed electrical installation. This mode of charging is suitable for
Building Information Modelling for Asset Management …
www.emsd.gov.hk6 1. Introduction 1.1. Overview and Objectives The Building Information Modelling for Asset Management (BIM-AM) Standards and Guidelines is based on the asset templates developed by Electrical & Mechanical Services Department (EMSD), which is a summary of information requirement for more than 21 types of Electrical & Mechanical (E&M) systems that need …
FORM 1 - New/Renewal Application for Registration as an ...
www.emsd.gov.hkELECTRICITY (REGISTRATION) REGULATIONS NEW/RENEWAL APPLICATION FOR REGISTRATION AS AN ELECTRICAL CONTRACTOR 此欄不用填寫 For Official use only 收件日期： Receipt date: 收據編號： Receipt Number: (注意：填寫此申請表格前請參閱「表格一備註」。
Guidance Notes for the Electrical Products (Safety ...
www.emsd.gov.hkThe Notes are a guide for suppliers of electrical products to understand the requirements of the Regulation. The Notes also set out lists of standards that are deemed to satisfy the applicable safety requirements of the Regulation. The Notes, which should be read in conjunction with the Regulation, are for guidance only and have no legal force.
Guidelines on Energy Efficiency of Lift & Escalator ...
www.emsd.gov.hkPractice for Energy Efficiency of Lighting Installations, Air Conditioning Installations and Electrical Installations, and the Performance-based Building Energy Code. As a supplement to the Lift & Escalator Code, the EMSD has developed this handbook of Guidelines on Energy Efficiency of Lift & Escalator Installations (Guidelines).
香港避雷系統與防雷裝置守則 大廈避雷系統適用標準規範 一 …
www.emsd.gov.hkIEC / BS EN 62305-1 = GB/T 21714.1 4. IEC / BS EN 62305-2 = GB/T 21714.2 5 IEC / BS EN 62305-3 = GB/T 21714.3 6. IEC / BS EN 62305-4 = GB/T 21714.4 7 8. Practice Note for Authorized Persons Buildings Department and Registered Structural Engineers 屋宇署156 ...
Guidelines s on n E n e r g y y E ffi cie n cy y o f ...
www.emsd.gov.hkBuildings was also launched. The Registration Scheme provides the certification to a building complying with one or more of the BEC. This book of Guidelines is copyrighted and all rights (including subsequent amendments) are reserved. The Building Energy Codes, corresponding Guidelines and Registration Scheme documents are
Related documents
Section 701 - Locations containing a bath or shower
electrical.theiet.orgSupplementary equipotential bonding The 17th Edition introduced a significant change for supplementary equipotential bonding. Regulation 701.415.2 states that, where the location containing a bath or shower is in a building with a protective equipotential bonding system in accordance with Regulation
Grounding, Bonding and nVent ERICO Cadweld
www.erico.comBecause lightning protection, grounding, equipotential bonding and surge protection are all interdependent technologies, reliable protection of structures and operations demands an integrated system approach. Power Protection TVSS Device Communications Line Protection Device Ground Electrode Low Impedance Ground using flat
Lightning Protection Solutions - ERICO
www.erico.comequipotential plane. 4. BOND ALL GROUND POINTS TOGETHER. Conduct the energy over-voltage transients is necessary. to the ground via a purpose-designed ... • Grounding and Bonding • Surge and Over-voltage Transient Protection ABOUT ERICO ERICO is a leading global designer,
SIMATIC S7-300 Automation System, Hardware and ...
cache.industry.siemens.comS7-300 Automation System, Hardware and Installation: CPU 312IFM - 318-2 DP A5E00203919-01 iii ˘ˇˇˆ ˙ ˘ ˝ ˛˛ ˚ ˘ ˜ ˘ˇˇ ˛ ˜
WA Electrical Requirements
www.commerce.wa.gov.auWAER January 2014 incorporating Amendment No. 3 August 2019 1 Energy Safety Dvi sion (Energy Safety) of the Department of Mines, Industry Regulation and Safety, following consultation with network operators and electrical contracting industry groups in Western Australia, issued
Telecommunications Infrastructure Standard for Data Centers
www.ieee802.orgIEEE 802.3 HSSG Data Center Standards ANSI/TIA-942 Telecommunications Infrastructure Standard for Data Centers Co-chairs: Chris DiMinico & Jonathan Jew Published 2005 – available through TIA at www.tiaonline.org ANSI/NECA/BICSI-002 Data Center Design and Implementation Best Practices co-chairs: Jonathan Jew & John Kacperski best practices – complements TIA …