Example: marketing
CHEMICAL RESISTANCE GUIDE - Everything Inside The Fence
polypropylene has better stress crack resistance and low temperature toughness than homopolymer at the expense of small reductions in other properties. Most Chemline valves and all the pipe fittings are PP-R. PP-R pipe is also available. The working temperature range of Chemline’s PP-R ball valves is –20 to 80°C (–4 to 176°F) and up to ...
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
BORE CHART (INSIDE DIAMETER OF PIPE)
everythinginsidethefence.comLight, Black = Weight per Foot Wall Thickness displayed are in inches and Weights displayed are in pounds/foot. IF THE WEIGHT IS NOT DISPLAYED USE THE FOLLOWING FORMULA TO CALCULATE THE WEIGHT OD – Wall x Wall x 10.68 = LBS / FOOT PIPE SIZE DN O.D. in inches 5 10 20 30 40 Std 60 80 XH 100 120 140 160 XXH 1 / 8 0.405 1 / 4 0.540 3 / 8 10 0.675 ...
Related documents
Typical Engineering Properties of Polypropylene
www.ineos.comHomopolymer 13 – 32 °F -10 – 0 °C Random Copolymer -5 – 20 °F -20 – -5 °C Impact Copolymer - 44 – 20 °F -40 – -5 °C Mechanical Properties Modulus of Elasticity (Young’s Modulus) Homopolymer 183,000 psi 1,300 MPa Copolymer 155,000 psi 1,100 MPa Poisson’s Ratio 0.42 0.42 Hardness
TYPICAL PROPERTIES OF POLYPROPYLENE (PP)
www.sdplastics.com*Homopolymer polypropylene. **Copolymer polypropylene. ***V-2, V-1, V-0, V-5 grades available. TYPICAL PROPERTIES OF POLYPROPYLENE (PP) ISO or UL Test Property HPP* HPP-filled CPP** CPP-filled ISO1183 Specific gravity 0.90-0.91 0.97-1.27 0.89-0.91 0.98-1.24 ISO62 Water absorption(%) 0.01-0.03 0.01-0.09 0.03 0.01-0.02 ...
Technical DaTa SheeT Polypropylene - Laminated Plastics
laminatedplastics.comTYPICAL PROPERTIES of POLYPROPYLENE ASTM or UL test Property Homopolymer Co-Polymer Flame Retardant PHYSICAL D792 Density (lb/in³) (g/cm³) 0.033 0.905 0.033 0.897 0.035 0.988 D570 Water Absorption, 24 hrs (%) <0.01 0.01 0.02 MECHANICAL D638 Tensile Strength (psi) 4,800 4,800 4,300 D638 Tensile Modulus (psi) 195,000 - -
Products and Properties - Braskem
www.braskem.comHOMO = Homopolymer RACO = Random Copolymer HECO = Heterophasic Copolymer HCHP = High Crystalline Homopolymer Nomenclature PP • Polypropylene This information refl ects typical values obtained in our laboratories, but should not be considered as absolute or as warranted values. Only the properties and values mentioned on
POLYPROPYLENE Material Safety Data Sheet
www.acplasticsinc.comNatural Homopolymer Polypropylene, O, P grade polypropylene. Chemical Family Homopolymer Polypropylene Formula [Ch (ch3) ch2-] Proper DOT Shipping Name: N/A DOT Hazard Classification: N/A II. Ingredients Principal Components Percent Threshold L imit Value (Units) Polypropylene (9003-07-0) >99% 10mg/m3 (total dust) III. Physical Data
Polypropylene - Pennsylvania State University
www.personal.psu.eduThe chemical name for polypropylene is poly(1-methylethylene). Common Names Some of the common names for polypropylene include the following: Polypropylene Polypro Polypropene Polipropene 25 Propene polymers Propylene polymers 1-Propene homopolymer Brand Names There are many different brand names for polypropylene used in industry.
SAFETY DATA SHEET Polypropylene (PP)
advancedpetrochem.comPolypropylene (PP) 9003-07-0 >99 % Additives have been incorporated to stabilize the polymer in appropriate amount according to specification of particular grade of Polypropylene. SECTION 4 : FIRST-AID MEASURES Description of necessary first aid measures Skin: Hot molten product stick to the skin immediately.
Polypropylene (PP)
www.opalindia.inPolypropylene - Homopolymer Sector OPaL Grade MFI (g/10 min.) (I 2) Special Characteristics Typical Applications ASTM D1238 Packaging g MH03 3 General Purpose Thermoforming Containers, Rigid Packaging, Flexible Packaging MH05K 5 Anti-Static Heavy wall Parts, Consumer Products, Toothpaste Tubes, Closures, ...
A Guide to Polyolefin Film Extrusion - LyondellBasell
www.lyondellbasell.comFor homopolymer polyethylenes, the higher the resin density, the higher the degree of crystallinity. High density PE resins have molecular chains with comparatively few side chain branches. This allows the chains to pack more closely together. The result is crystallinity up to 85%. Low density PE resins generally have crystallinity from 35 to 55%.