Coflexip Flexible Pipe - Halliburton

1 Surface LEVEL 1 CAPABILITY | Level 2 Capability (if applicable). Well Testing Coflexip Flexible pipe HIGH PRESSURE Flexible FLOW LINES. OVERVIEW. When an application calls for Flexible flow lines, Halliburton Testing and Subsea often 1. relies on Coflexip Flexible pipe . These Flexible lines run from the flow and kill wings of the surface test tree for the purpose of conveying fluids to and from the surface test tree to 2. the rest of the surface well test package, kill pumps, or stimulation package. Coflexip Flexible pipe with 2-in., 3-in., and 4-in. inside diameters (ID) are used for applications up to 15,000 psi to replace hard piping. By using Flexible pipe instead of hard 3. piping, many connections are eliminated, allowing for rig motion and string manipulation. The Coflexip Flexible pipe hose has an articulated carcass of spiral-wound stainless steel covered by an outer thermoplastic sheath.

2 The inner carcass flexes but will not kink or 4. collapse, ensuring the ID is maintained. The outer thermoplastic sheath is extruded over the pipe , making it completely leak-proof and resistant to most chemicals. Coflexip Flexible pipe , includes two end-fittings complete with lifting/handling collars. 5. Both the inside and outside of a standard end-fitting is protected against corrosion, wear, abrasion, and handling. 6. Features and Benefits Allows for easier and more timely rigging up and rigging down of equipment Hydrogen sulfide (H2S) and carbon dioxide (CO2) limits: 1. The thermoplastic inner tube makes the pipe leak-tight. 2. The carcass, with interlocked zeta Pressure psi (bar) Temperature F ( C) Fluid Condition and flat steel spiral pressure, resists internal pressure and external 10,000 (690) 236 (110) CO2 + H2S < 50% crunching loads.

3 3. The intermediate thermoplastic 10,000 (690) 266 (130) CO2 + H2S < 30% sheath is an anti-friction layer. 4. The double crosswound steel armors 15,000 (1,034) 266 (130) CO2 + H2S < 10%. resist axial loads and protect the pipe from torsional strain resulting from Compatible with a number of fluids. Refer to OEM guidelines for additional information. handling and working conditions. 5. The thermoplastic outer jacket Applications protects the armors from external corrosion. Exploration and appraisal well testing 6. The stainless steel outer wrap Cleanup and flowback (SSOW) protects the pipe from Production and in-line testing (including multiphase flow metering) mechanical impact, abrasion, weathering, and accidental Extended well testing mishandling. Early production facilities Surface | Level 2 Capability (if applicable).

4 Well Testing LEVEL 1 CAPABILITY. Equipment Specifications Nominal Part No. Working Design Dimensions Liner Type Weight Connections ID Size Pressure Temperature lb psi F Length OD (kg). (bar) ( C) ft (m) in (cm). 2 in. 102079794 15,000 4 to 266 25 Coflon 2-1/16-in., 15,000-psi ( mm) (1034) ( 20 to 130) ( ) ( ) ( ) API 6A Type 6BX flanges 102107829 15,000 4 to 266 30 Coflon 885 2-1/16 in., 15,000 psi (1034) ( 20 to 130) ( ) ( ) ( ) API 6A Type 6BX flanges 102284390 15,000 4 to 266 55 Coflon 3404 2-in., Fig. 2202. (1034) ( 20 to 130) ( ) ( ) (1544) MALE (W) x FEMALE (T). 102058509 15,000 4 to 266 55 Coflon 1925 2-1/16 in., 15,000 psi (1034) ( 20 to 130) ( ) ( ) (873) API 6A Type 6BX flanges 102136919 15,000 4 to 266 85 Coflon 2900 2-1/16-in., 15,000-psi (1034) ( 20 to 130) ( m) ( ) (1315) API 6A Type 6BX flanges 3 in.

5 101754846 15,000 4 to 266 55 Coflon 3404 3-1/16-in., API 6A. ( mm) (1034) ( 20 to 130) ( ) ( ) (1544) hubs (BX 154). 102284391 15,000 4 to 266 55 Coflon 3200 3-in., Grayloc . (1034) ( 20 to 130) ( ) ( ) (1451) D27 connections 102107821 15,000 4 to 266 60 Coflon 3468 3-1/16-in., API 6A. (1034) ( 20 to 130) ( ) ( ) (1573) hubs (BX 154). 102107820 15,000 4 to 266 65 Coflon 3732 3-1/16-in., API 6A. (1034) ( 20 to 130) ( ) ( ) (1693) hubs (BX 154). 102107819 15,000 4 to 266 70 Coflon 3404 3-1/16-in., API 6A. (1034) ( 20 to 130) ( ) ( ) (1544) hubs (BX 154). 102130108 15,000 4 to 266 85 Coflon 4133 3-1/16-in., API 6A. (1034) ( 20 to 130) ( ) ( ) (2279) hubs (BX 154). 4 in. 102144706 10,000 4 to 266 60 Coflon 3730 4-1/16-in., API 6A. ( mm) (690) ( 20 to 130) ( ) ( ) (1692) flange (BX 155). 102272862 10,000 4 to 266 60 Coflon 3730 4-1/16-in.

6 , API 6A. (690) ( 20 to 130) ( ) ( ) (1692) hubs (BX 155). Notes: The maximum continuous flow rate for all smooth-bore hoses is 49 ft/s (15 m/s). For individual equipment specifications, refer to the equipment data book. Equipment is designed/certified to API 16C, NACE MRO175, CE/PED, and NORSOK standards as applicable, and documented on individual equipment specification data sheets. These ratings are guidelines only. Contact your local Halliburton Surface Well Testing (SWT) representative for more information. Coflon and Coflexip are registered trademarks of Technip. Grayloc is a registered trademark of Oceaneering International, Inc. For more information, contact your local Halliburton representative or visit us on the web at Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the contract between Halliburton and the customer that is applicable to the sale.

7 H012193 6/16 2016 Halliburton . All Rights Reserved.