Example: marketing
Colorfastness to Light - Contract Textiles
AATCC 16 Option 1 or 3* The AATCC 16 Option 1 and 3 are test methods of the American Association of Textile Chemists and Colorists (AATCC). ACT recognizes both methods where the only difference is the light source being used. In AATCC 16 Option 1 a Carbon-Arc lamp is used as the light source, and in AATCC 16 Option 3 a Xenon-Arc lamp is used.
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
Flammability - ACT: Association for Contract Textiles
contracttextiles.orgTransfer of dye from the surface of a dyed or printed fabric onto another surface by rubbing. Upholstery – Woven Fabrics AATCC 8 Dry Crocking, Grade 4 minimum
Related documents
SCIENCE CITATION INDEX EXPANDED - JOURNAL LIST …
bezmialem.edu.tr5. aatcc review 6. abdominal imaging 7. abhandlungen aus dem mathematischen seminar der universitat hamburg 8. abstract and applied analysis 9. abstracts of papers of the american chemical society 10. academic emergency medicine 11. academic medicine 12. academic pediatrics 13. academic radiology 14. accountability in research-policies and ...
AAMA 611-98 Voluntary Specification for Anodized ...
aluminium-guide.comAATCC - American Association of Textile Chemists and Colorists ASTM - American Society for Testing and Materials CMC - Color Measurement Committee of the Society of Dyers and Colorists ISO - International Organization for Standardization 5.0 GENERAL 5.1 To meet this specification, products tested shall meet all
Sto Gold Coat
www.stocorp.comAATCC 127 (modified) No cracking of the coating or bond failure, no water penetration after cyclic weathering & 5 hour water column (21.5 in [55 cm]) Pass Adhesion to ASTM E2570/C297 > 15 psi (103 kPa) > 15 psi (105 kPa) over glass mat gypsum sheathing > 50 psi (345 kPa) over CMU, OSB & plywood sheathing Air Leakage Resistance
INSULATION FOR THE BUILDING ENVELOPE
usa.sika.com(ASTM E331, AATCC Test Method 127) • Class A Flame Spread and Smoke Developed Indices per IBC Chapter 8, Interior Finishes (1” min.) • 1, 2, 3 or 4 hour Fire Rated Assemblies as shown in the UL Fire Resistance Directory. NOTE: For details, requirements and/or limitations, refer to Third-Party Evaluation Reports