COMPRESSOR OILS HYCOM VDL T 32, 46, 68, 100, …

1 Visit us: Email: | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: OILSHYCOM VDL T 32, 46, 68, 100, 150, 220, 320 Special Features: It is specially blended from saturated paraffinic Group II base stocks and selected premium grade of anti-oxidants, anti-rust, anti-foam and anti-wear additives. The additives used employ the latest state of the art ash less (free from metals) :It passes through the stringent Pneurop Oxidation performance test with catalyst and DIN 51352 Part II. It meets the requirements of DIN 51506 VD-L and ISO DIS 6521 specifications. It also exceeds SPERRY VICKERS I-286-S, AFNOR NFE 48603(HM), DIN 51524 Part II (HLP) and CINCINNATI MILACRON P-68, P-69, P-70 specifications.

2 Since the product exceeds DIN 51524 Part II (HLP) norms it provides improve antiwear performance as compared to normal COMPRESSOR oils. The anti-oxidation property of the oil exceeds Area:It is most suitable to be used in high performance rotary air compressors/screw compressors and vacuum pump. This can be used upto 250 C air discharge temperature. It can be used in journal bearing and anti-friction bearings for fans operating at high speed and temperatures. HYCOM VDL T 100 is an ashless fluid which can be used in the high pressure boiler control 1 of 15 Visit us: Email: | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: Properties: HYCOM VDL T324668100150220320 Viscosity @ 40 C, cSt29 3542 5062 7490 110135 165210 230290 350 Viscosity Index, Point, C, Point, C, Max(-) 9(-) 9(-) 9(-) 9(-) 9(-) 9(-) 9 FZG, Failure LoadStage, 2 of 15 Visit us: Email: | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: C 100, 150,220, 320,460 Special Features.

3 These are COMPRESSOR oils formulated with selected base stocks and a special compounding agent to give excellent resistance to washing effect of water. These are further fortified with anti-rust and anti-corrosion agent and have good fluidity at low C grades meet DIN 51506 Application Area: HYCOM C grades are recommended for cylinder lubrication of single and multistage air compressors with moist air and provide excellent lubrication of piston rings, valves, cylinder liners etc. HYCOM C 460 has low sulphur content for applications in ammonia synthesis compressors in fertiliser Properties: HYCOM C100150220320 Kinematic Viscosity @ 40 C, cSt95 105140 160210 230310 330 Flash Point, COC, C, number, mg Point, C, Max(-)6036 Page 3 of 15 Visit us: Email: | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: HYCOM 150 PSpecial Features: It is blended out of highly refined turbine base stocks and special types of anti-oxidants, anti-rust, anti-foam and demulsifier which do not react to any of the types of Benefits.

4 This oil has good demulsibility property, low deposits and sludge foaming tendency at a wide range of working temperature and in any gaseous DIN 51506 VDL specifications, IS 13256:1992 DABA pplication Areas:Specially developed for railway Properties:150 PAppearanceClearAcidity, Total mg KOH / @ C, Point, COC, C>210 Pour Point, C<-15 Cincinnati Milacron @ 135 C, 168 HrsPassPage 4 of 15 Visit us: Email: | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: PFZG Rig Test, Pass Load Stage>8 Rusting Test, Syn Sea Water, 24 HrsPassKin. Viscosity @ 40 C, cSt135 - 165 Kin. Viscosity @ 100 C, Index100 Page 5 of 15 Visit us: Email: | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: LS SeriesSpecial Features: HYCOM LS grades are low sulphur high viscosity oils which can be used in syn gas compressors of make like Cooper Bessemer, Nuovo Pignone etc.

5 The product will is compatible with syn gas operation at high pressure and there will be minimum risk of oxidation. The risk of catalyst poisoning is eliminated as the product has a very low sulphur content. (< wt)Physico-Chemical Properties: HYCOM LS220320460 Kin. Viscosity @ 40 C, cSt220320461 Kin. Viscosity @ 100 C, Index10510097 Pour Point, C-9-9-9 Acidity Inorganic., mg KOH/gNilNilNilFlash Point, COC, C240240240 Rusting TestPassesPassesPassesFoam Tendency/StabilitySequence ISequence IISequence III10/Nil10/Nil10/Nil10/Nil10/Nil10/Nil1 0/Nil10/Nil10/NilPage 6 of 15 Visit us: Email: | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on.

6 Stability At 121 C, 312 Hrs,10 Ltrs Air/Hour Inc In Kin Visc @ 100 C, % Content, % Mass, Strip, Corrosion, At 100 CFor 3 Hours1a1a1aDemulsibility, 82 C, 20 Minutes40-40-040-40-040-40-0 Air Release Value @ 90 C121417 FZG EP Test, PLS121212 Thermal Stabilitycm Procedure BCopper AppearanceSteel AppearanceSludge% Visc Deposit Deposit Deposit 7 of 15 Visit us: Email: | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: TURBO SYNS pecial Features: Available in ISO 46, 68 and 100 viscosity grades, HYCOM TURBO SYN fluids are formulated from synthetic hydrocarbon fluids (PAO s) combined with the latest additive technology and can offer : Extended Oil Life:Longer fluid life means reduced servicing, less down time and improved cost effectiveness Reduced Air Separator Blocking:These fluids have been formulated with particular attention to good air separator performance Good Compatibility with seals and Paints:Compatibility equivalent to the best mineral oil means these fluids can be introduced into compressors with complete confidence and no added cost of change over.

7 Total Compatibility with Polycarbonate filter Bowls: Increased Oxidation Protection:Resistance to oxidation means longer fluid life, fewer oil changes and reduction of servicing costs Excellent Viscosity Temperature Characteristics:These fluids are formulated to give the correct viscosity at the temperature of operation. At low temperature they are less viscous than conventional fluids providing easier start up and reduced energy consumption. At high temperature they are more viscous and provide better lubrication and wear control Excellent Wear Protection:Synthetic hydrocarbon fluids show an excellent response to advise and give wear protection superior to mineral 8 of 15 Visit us: Email: | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: Excellent Separation from Air & Water:Rapid separation of air and water means more effective COMPRESSOR operation and reduced fluid contamination giving long life.

8 Very Low Carbon Forming Tendencies:Very low Pneurup Oxidation Test values means reduced valve servicing and safer COMPRESSOR operations. High Flash Point and Low Volatility:Reduced oil consumption and lower oil carry over means cheaper, cleaner operation. Better Corrosion Protection:Corrosion protection better than mineral oil lubricants means longer equipment life and better protection for the total air system. Improved performance as compared to Ester based Lubricants:In the presence of Iron & water catalysts there is no significant hydrolysis of HYCOM TURBO SYN 68, however traditional ester & diester lubricants undergo significant Properties: HYCOM TURBOSYN 32 SYN 46 SYN 68 SYN 100 Kinematic Viscosity @ 100 Viscosity @ 40 C324668100 Viscosity Index135135135135 Page 9 of 15 Visit us: Email: | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on.

9 @ 20 Point, C-51-40-40-36 Flash Point, COC, C230240245248 Foam TendencyTrace (Nil)Trace (Nil)Trace (Nil)Trace (Nil)Demulsibility (ASTM D 1401) 40-40-0 in lessthan 15 minutes40-40-0 in lessthan 20 minutes40-40-0 in 21minutes40-40-0 in 22minutesAppearanceClearClearClearClearF ZG Test ( )12 pass12 pass12 pass12 passExtended Oil LifeFor a COMPRESSOR lubricant to perform its correct function over extended periods of operation it must have Increased oxidation protection Superior thermal stability Good Air separator performance Low Carbon forming tendenciesOxidation ProtectionWith particular reference to oil flooded rotary compressors a modified DIN 51352 test has been developed which simulates the vigorous mixing of oil and air under conditions of catalytic oxidation.

10 For the most severe duty applications, 500 hours at 120 C are used as the test conditions and the oil is analysed for sludge content, acidity increase and viscosity 10 of 15 Visit us: Email: | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: Properties:ISO VG4668100KV 40 % these very severe conditions all four fluids show excellent retention of their original properties. Sludge formation is very low even after 500 hours and it is widely believed that this correlates with good performance in oil-air Separator PerformanceAir separator performance can be partly related to the cleanliness of the intake air, it can also be seriously affected by the quality of the lubricants.