Conshelf XIV Conshelf XIV Supreme - Aqua Lung

1 Conshelf XIVC onshelf XIV SupremeUser's ManualRev 03/162 Conshelf XIV User's ManualCOPYRIGHT NOTICEThis user's manual is copyrighted, all rights reserved. It may not, in whole or in part, be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine readable form with out prior consent in writing from Aqua Lung America, Inc. 2016 Aqua Lung InternationalCONSHELF XIV User s Manual PN 108102 You can contact a Technical Advisor via e-mail NOTICEAqua Lung is a registered trademark of Aqua Lung America, , Cautions and Notes:Pay special attention to information provided in Warnings, Cautions and Notes that are accompanied by one of these symbols.

2 A NOTE is used to emphasize important points, tips and WARNING indicates a procedure or situation that, if not avoided, could result in serious injury or death to the CAUTION indicates any situation or technique that could cause damage to the product and could subsequently result in injury to the of ContentsGeneral Precautions & Enriched Air Nitrox ..5 Product Description ..6 Preparation and Setup ..7 Attaching the Yoke Connector to the Cylinder Valve ..7 Attaching the DIN Connector to the Cylinder Valve.

3 8 Pre-Dive Inspection ..9 Diving with the Regulator ..11 Cold Water Diving ..11 Post-Dive Inspection ..12 General Procedures ..12 Removing the Yoke Connector from the Cylinder Valve ..12 Removing the DIN Connector from the Cylinder Valve ..13 User Care and Maintenance ..13 Inspection and Service ..15 Warranty Information ..15 Technical Specifications ..16 Conshelf XIV Parts .. XIV User's ManualGENERAL PRECAUTIONS & WARNINGSWARNING: Always pressurize the regulator gradually by opening the cylinder valve SLOWLY.

4 WARNING: Factory prescribed service for this regulator must be performed annually by an Authorized Aqua Lung Technician. Service and repair must not be attempted by untrained or unqualified : DO NOT use the regulator first stage as a carry handle when lifting or transporting the cylinder as this can damage the regulator or the cylinder : When diving in cold water (below 50 F or 10 C), you must have received training and certification in the techniques of cold water diving from a recognized training.

5 Before using this regulator, you must have successfully received training and certification in the technique of SCUBA diving from a Military or government operated diving school (or any recognized certification agency). Use of SCUBA equipment by uncertified or untrained persons is dangerous and can result in serious injury or : DO NOT use any type of solvent, aerosol spray or hydrocarbon based products to clean or lubricate your regulator, doing so may cause permanent damage to certain components.

6 The regulator does not require any lubrication under normal circumstances, except that which is performed during annual service by an Authorized Aqua Lung : DO NOT attempt to perform any disassembly while the regulator is under pressure. Disassembly of any regulator components should only be performed by an Authorized Aqua Lung Technician. 5 USING ENRICHED AIR NITROXWARNING: Before attempting to use this regulator with enriched air nitrox, it is imperative that you have received training and hold a certification of competency in the technique of scuba diving using enriched air nitrox issued by an accredited agency for such certification.

7 Use of the regulator by persons uncertified or untrained for this purpose is dangerous and can result in serious injury or : To reduce the risk of oxygen ignition, gas cylinder(s) should always be opened : The maximum diving depth and the maximum exposure time is determined by the oxygen content of the : DO NOT attempt to use a Conshelf XIV Supreme regulator containing silicone fluid with enriched air nitrox (EAN). Doing so could result in serious injury or regulator was developed for use with enriched air nitrox, provided that the percentage of oxygen does not exceed 40%.

8 Every regulator is assembled in a clean workshop, using compatible components and special lubricants. Furthermore, each regulator is designed to meet adiabatic compression tests to ensure its safety and compatibility with high oxygen you intend to use your regulator with enriched air nitrox (oxygen percentage not exceeding 40%), it is essential to ensure that the regulator is kept clean you want to use your regulator alternately with breathing air, the breathing air must be oxygen-compatible or double-filtered and the content of hydrocarbons should not exceed mg/m3.

9 Your Authorized Aqua Lung Dealer can help you determine whether the supplied breathing air meets these Europe, air in accordance with standard EN 12021 and in the United States, standard breathing air classified as Grade E, do not meet these criteria. Grade E breathing air or air in compliance with EN 12021 may contain traces of hydrocarbons, particularly traces of compressor oil; they are not considered harmful to breathe, but can pose a risk in the presence of elevated oxygen time, a hydrocarbon build-up may occur in valves and regulators.

10 When this hydrocarbon build-up comes into contact with oxygen-enriched air under pressure, it may cause a reaction leading to combustion. Therefore, if a regulator was used with Grade E or EN 12021 breathing air, it is imperative that it get brought to an Authorised Aqua Lung Dealer for a complete overhaul, including cleaning and degreasing, before returning it to service for use with enriched air if the regulator s second stage components are not exposed to high-pressure enriched air nitrox, Aqua Lung recommends that the same cleaning and degreasing procedures should be followed for the entire regulator.