Example: marketing

CRANES AND DERRICKS IN CONSTRUCTION FINAL RULE ... - …

osha is making this document, the regulatory text, available for informational purposes only. This action does not affect the effective date of the FINAL rule on CRANES and DERRICKS in CONSTRUCTION , which will be 90. days after August 9, 2010, the date the FINAL rule will be published in the Federal Register. Until the date of publication, the full rule, including the preamble, can be found at After publication the rule can be found at the Federal Register at _____. CRANES AND DERRICKS IN CONSTRUCTION FINAL RULE. AND OTHER AFFECTED SUBPARTS. VII. AMENDMENTS TO STANDARDS. For the reasons stated in the preamble of this FINAL rule, the Agency is amending 29 CFR part 1926 to read as follows: PART 1926 [AMENDED].

OSHA is making this document, the regulatory text, available for informational purposes only. This action does not affect the effective date of the final rule on Cranes and Derricks

Tags:

  Osha, Crane, Derricks, Cranes and derricks

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of CRANES AND DERRICKS IN CONSTRUCTION FINAL RULE ... - …

1 osha is making this document, the regulatory text, available for informational purposes only. This action does not affect the effective date of the FINAL rule on CRANES and DERRICKS in CONSTRUCTION , which will be 90. days after August 9, 2010, the date the FINAL rule will be published in the Federal Register. Until the date of publication, the full rule, including the preamble, can be found at After publication the rule can be found at the Federal Register at _____. CRANES AND DERRICKS IN CONSTRUCTION FINAL RULE. AND OTHER AFFECTED SUBPARTS. VII. AMENDMENTS TO STANDARDS. For the reasons stated in the preamble of this FINAL rule, the Agency is amending 29 CFR part 1926 to read as follows: PART 1926 [AMENDED].

2 Subpart A General 1. The authority citation for subpart A of 29 CFR part 1926 is retained as follows: Authority: Sec. 3704, Contract Work Hours and Safety Standards Act (40 333);. secs. 4, 6, and 8, Occupational Safety and Health Act of 1970 (29 653, 655, 657);. Secretary of Labor's Order No. 12 71 (36 FR 8754), 8 76 (41 FR 25059), 9 83 (48 FR. 35736), 6 96 (62 FR 111), or 5 2007 (72 FR 31160) as applicable; and 29 CFR part 1911. 2. Section is added to read as follows: Incorporation by reference. (a) The standards of agencies of the Government, and organizations which are not agencies of the Government which are incorporated by reference in this part, have the same force and effect as other standards in this part.

3 Only the mandatory provisions ( , provisions containing the word "shall" or other mandatory language) of standards 1. osha is making this document, the regulatory text, available for informational purposes only. This action does not affect the effective date of the FINAL rule on CRANES and DERRICKS in CONSTRUCTION , which will be 90. days after August 9, 2010, the date the FINAL rule will be published in the Federal Register. Until the date of publication, the full rule, including the preamble, can be found at After publication the rule can be found at the Federal Register at _____. incorporated by reference are adopted as standards under the Occupational Safety and Health Act.

4 The locations where these standards may be examined are as follows: (1) Offices of the Occupational Safety and Health Administration, Department of Labor, Frances Perkins Building, Washington, DC 20210. (2) The Regional and Field Offices of the Occupational Safety and Health Administration, which are listed in the Government Manual. (b) The materials listed in paragraphs (g) through (ff) of this section are incorporated by reference in the corresponding sections noted as they exist on the date of the approval, and a notice of any change in these materials will be published in the Federal Register. These incorporations by reference were approved by the Director of the Federal Register in accordance with 5 552(a) and 1 CFR part 51.

5 (c) Copies of standards listed in this section and issued by private standards organizations are available for purchase from the issuing organizations at the addresses or through the other contact information listed below for these private standards organizations. In addition, these standards are available for inspection at the National Archives and Records Administration (NARA). For information on the availability of these standards at NARA, telephone: 202 741 6030, or go to Also, the standards are available for inspection at any Regional Office of the Occupational Safety and Health Administration ( osha ), or at the osha Docket Office, Department of Labor, 200 Constitution Avenue, NW.

6 , Room N 2625, Washington, DC 20210; telephone: 202 693 2350 (TTY number: 877 889 5627). 2. osha is making this document, the regulatory text, available for informational purposes only. This action does not affect the effective date of the FINAL rule on CRANES and DERRICKS in CONSTRUCTION , which will be 90. days after August 9, 2010, the date the FINAL rule will be published in the Federal Register. Until the date of publication, the full rule, including the preamble, can be found at After publication the rule can be found at the Federal Register at _____. (d) [Reserved.]. (e) [Reserved.]. (f) [Reserved.]. (g) The following material is available for purchase from the American Conference of Governmental Industrial Hygienists (ACGIH), 1330 Kemper Meadow Drive, Cincinnati, OH 45240; telephone: 513-742-6163; fax: 513-742-3355; e-mail: Web site: : (1) Threshold Limit Values of Airborne Contaminants for 1970, 1970, IBR.

7 Approved for (a) and Appendix A of (h) The following material is available for purchase from the American National Standards Institute (ANSI), 25 West 43rd Street, Fourth Floor, New York, NY 10036;. telephone: 212-642-4900; fax: 212-302-1286; e-mail: Web site: (1) ANSI , Safety Requirements for Explosive-Actuated Fastening Tools, IBR approved for (e). (2) ANSI , Safety Requirements for Workmen's Hoists, IBR. approved for (c). (3) ANSI , Safety Requirements for Material Hoists, IBR approved for (b). (4) ANSI (R1970), Practice for Industrial Lighting, IBR approved for (b). 3. osha is making this document, the regulatory text, available for informational purposes only.

8 This action does not affect the effective date of the FINAL rule on CRANES and DERRICKS in CONSTRUCTION , which will be 90. days after August 9, 2010, the date the FINAL rule will be published in the Federal Register. Until the date of publication, the full rule, including the preamble, can be found at After publication the rule can be found at the Federal Register at _____. (5) ANSI , Elevators, Dumbwaiters, Escalators, and Moving Walks, IBR approved for (d). (6) ANSI , Elevators, Dumbwaiters, Escalators, and Moving Walks Supplement, IBR approved for (d). (7) ANSI , Elevators, Dumbwaiters, Escalators, and Moving Walks Supplement, IBR approved for (d).

9 (8) ANSI , Elevators, Dumbwaiters, Escalators, and Moving Walks Supplement, IBR approved for (d). (9) ANSI , Elevators, Dumbwaiters, Escalators, and Moving Walks Supplement, IBR approved for (d). (10) ANSI , Practice for the Inspection of Elevators (Inspector's Manual), IBR approved for (d). (11) ANSI , Practice for the Inspection of Elevators (Inspector's Manual) Supplement, IBR approved for (d). (12) ANSI , Practice for the Inspection of Elevators (Inspector's Manual) Supplement, IBR approved for (d). (13) ANSI , Vehicle Mounted Elevating and Rotating Work Platforms, IBR approved for (a) and (b). (14) ANSI , Safety Code for the Use, Care, and Protection of Abrasive Wheels, IBR approved for (g), (b), (c), and (d).

10 4. osha is making this document, the regulatory text, available for informational purposes only. This action does not affect the effective date of the FINAL rule on CRANES and DERRICKS in CONSTRUCTION , which will be 90. days after August 9, 2010, the date the FINAL rule will be published in the Federal Register. Until the date of publication, the full rule, including the preamble, can be found at After publication the rule can be found at the Federal Register at _____. (15) ANSI , Safety Code for Conveyors, Cableways, and Related Equipment, IBR approved for (a). (16) ANSI , Safety Standards for Powered Industrial Trucks, IBR.


Related search queries