Transcription of CUTLASS PINTO CD PIN WELDING SYSTEM
1 Email: now accepting: CUTLASS Fasteners, Inc. 83 Vermont Ave., Unit 6, Warwick, RI 02888 Tel: (401) 732-6333 Fax: (401) 732-6336 Stud Fasteners Equipment Service CUTLASS PINTO CD PIN WELDING SYSTEM One of the new CUTLASS range of light, portable, powerful and reliable stud WELDING systems. Built specifically for the insulation contractor as a small, lightweight and robust pin WELDING equally at home in the "Job Shop" as a compact and very portable pin or stud WELDING SYSTEM . Standard features include: ..As you can see the PINTO comes to you ready to perform, complete with the accessories for immediate plug it into any 120 volt supply and away you go. PINTO controller capable of WELDING 12ga. and 10ga. insulation pins. PKM-1D weld gun and cable set. Ground cable and clamp assembly. Accessories for 12ga. and 10ga. insulation pins. Circuit breaker protected.
2 Simple 1 thru' 6 power settings. Controller 28 lbs. Rugged all steel chassis 9 H X W X 12 L Operation, parts and maintenance manual. * shown with cupped head pin option email: now accepting: CUTLASS Fasteners, Inc. 83 Vermont Ave., Unit 6, Warwick, RI 02888 Tel: (401) 732-6333 Fax: (401) 732-6336 Stud Fasteners Equipment Service CUTLASS PINTO CD PIN WELDING SYSTEM TECHNICAL DATA SIZE: 9" H x " W x 12" L WEIGHT: 28 lbs. (13 kgs.) POWER SUPPLY: 120/240 Volt, 50/60 Hz. FUSING: 6/4 Amp Circuit Breaker STUD CAPACITY: 12ga. and 10ga. WELD RATE: 12 studs/min. WELD MODE: Contact CHARGE RANGE: 80 VDC to 200 VDC PKM-1D WELD WELD/CONTROL CABLE: 25 ft. (8 mtrs.) GROUND CABLE: 16 ft. (5 mtrs.) GUN & CABLE WEIGHT: 14 lbs. (6 kgs.) TOTAL SHIPPING WEIGHT: 44 lbs. (20 kgs.) STANDARD PINTO (for 12ga. & 10ga. nails only) Part No. CSS-1K CHIP PINTO (for 12ga.)
3 & 10ga. nails AND cupped head pins) Part No. CSS-1 CPK CUTLASS Fasteners have been making Capacitor Discharge (CD) stud WELDING systems for over 20 years. We strive to produce the best CD welders, and with our commitment to continuous research and development in the stud WELDING field we are now able to offer our most versatile line of CD welders to date. Our Other CUTLASS CD welders include the CLASSIC, CLIPPER, and MODULAR CONTACT systems. The CUTLASS PINTO was designed specifically for the insulation fixing industry. The machine has all the basic features of the CUTLASS range of CD stud WELDING systems, but with increased portability, minimal weight and simplicity built in. Power/Voltage setting is by a simple 1 through 6 position rotary switch on the front panel. The PKM-1D weld gun is a light but strong, ergonomically designed weld of withstanding the rigors of continuous on-site use.
4 The gun accepts either the industry standard "B" style collets, or with an optional adaptor, Insert collets or Standard Adjustable weld chucks. STUD WELDING is our BUSINESS. We manufacture and stock over 8 million weld studs and distribute a complete range of CAPACITOR DISCHARGE, SHORT CYCLE and DRAWN ARC stud WELDING products. For additional information call CUTLASS toll free on 1-800-536-6333 CUTLASS reserve the right to improve designs and/or change technical specifications without prior notice.
