Daqstation DX2000 User's Manual

1 User sManualYokogawa Electric CorporationModel DX2004/DX2008/DX2010/DX2020/ DX2030/DX2040/DX2048 Daqstation DX2000IM 04L42B01-01E8th EditioniIM 04L42B01-01 EIntroductionThank you for purchasing the Daqstation DX2000 (hereafter referred to as DX ).This User s Manual explains how to use the DX. To ensure correct use, please read this Manual thoroughly before following manuals are provided for the DX: Paper ManualManual TitleManual Operation GuideIM 04L42B01-02 EExplains the basic operations of the of Pollution Caused by the ProductIM 04L41B01-91 CGives a description of pollution the Usage of Open Source SoftwareIM 04L41B01-81Z1 Gives a description of the licenses. Electronic ManualsManual TitleManual Operation GuideIM 04L42B01-02 EThis is the electronic version of the paper User s ManualIM 04L42B01-01 EDescribes how to use the DX.

2 The communication and network functions, custom display functions, and some of the options are Batch (/BT2)User s ManualIM 04L41B01-03 EDescribes how to use the multi batch function (/BT2 option). DX1000/DX1000N/ DX2000 Custom DisplayUser s ManualIM 04L41B01-04 EDescribes how to use the custom display Advanced Security Function (/AS1) User s ManualIM 04L41B01-05EN Describes how to use the advanced security function (/AS1 option).DX1000/DX1000N/ DX2000 Communication InterfaceUser s ManualIM 04L41B01-17 EDescribes how to use communication functions through an Ethernet or serial EtherNet/IPCommunication InterfaceUser s ManualIM 04L41B01-18 EDescribes how to use communication functions through an EtherNet/IP (/CP1)Communication InterfaceUser s ManualIM 04L41B01-19 EDescribes how to use communication functions through the PROFIBUS-DP interface (/CP1 option).

3 DAQSTANDARD Manuals All manuals other than IM 04L41B01-66EN are contained in the DAQSTANDARD TitleManual Data Viewer User s ManualIM 04L41B01-63 ENDAQSTANDARD Hardware Configurator User s ManualIM 04L41B01-64 ENDAQSTANDARD DX-P Hardware Configurator User s ManualIM 04L41B01-65 ENInstalling DAQSTANDARDIM 04L41B01-66EN8th Edition: March 2016 (YK)All Rights Reserved, Copyright 2005, Yokogawa Electric Corporation iiIM 04L42B01-01 ENotes The contents of this Manual are subject to change without prior notice as a result of continuing improvements to the instrument s performance and functions. Every effort has been made in the preparation of this Manual to ensure the accuracy of its contents. However, should you have any questions or find any errors, please contact your nearest YOKOGAWA dealer.

4 Copying or reproducing all or any part of the contents of this Manual without YOKOGAWA s permission is strictly prohibited. The TCP/IP software of this product and the document concerning the TCP/IP software have been developed/created by YOKOGAWA based on the BSD Networking Software, Release 1 that has been licensed from the Regents of the University of vigilantplant, Daqstation , Daqstation , and DXAdvanced are registered trademarks of Yokogawa Electric Corporation. Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Adobe and Acrobat are registered trademarks or trademarks of Adobe Systems Incorporated. Kerberos is a trademark of the Massachusetts Institute of Technology (MIT).

5 Company and product names that appear in this Manual are registered trademarks or trademarks of their respective holders. The company and product names used in this Manual are not accompanied by the registered trademark or trademark symbols ( and ).Revisions1st edition: December 20052nd edition: October 20063rd edition: April 20074th edition: December 20075th edition: November 20086th edition: March 20107th edition: December 20108th edition: March 2016 iiiIM 04L42B01-01 EDX s Version and Functions Described in This ManualThe contents of this Manual corresponds to the DX with release number 4 and style number s Version and FunctionsFor the procedure to check the version, see section and change to functionsRefer (Added)German, French, and Chinese as display (Added)Modbus client connection retry interval: 10 s, 20 s, and 30 in IM04L41B01-17E(Added)24 VDC/AC power supply (/P1 option).

6 (Added)Tab key on the USB keyboard corresponds to arrow (Added)Operations to request and release network information. Section in IM04L41B01-17E(Changed)Modbus client: Function to connect a server with a unit number is changed. Section in IM04L41B01-17E(Added)Modbus client: Connection timeout in IM04L41B01-17E(Added)Modbus registers (floating point type for communication input data).Section in IM04L41B01-17E(Added)A data output format (Skip or OFF channel data not output).Section in IM04L41B01-17 ECB command(Changed)Error messages 105, 221, and 222 are (Changed)Error messages 215, 218, and 536 are 2(Version )(Added)Improvement to the operability on the historical trend (Changed)Displaying the date in the grid time of the trend display when the trend interval is greater than or equal to 1 and (Added)Improvement to the display group setup (Added)Addition of the Upper and Lower settings to the bar graph base (Added)Addition of the relay action when alarm ACK is executed to the alarm output relay , , and (Added)Ability to reset the computed value during computation.

7 Section (Changed)Changes to how the data files are (Added)Sorting the files by the update , , and (Added)Storage method for constantly retaining the most recent data files in the CF card (Media FIFO).Sections and (Added)Progress display when saving all data of the internal (Changed)Changing the initial display selection and (Changed)Improvement to the data save operation to the USB flash and (Changed)Retaining the state of the CapsLock and NumLock keys on the USB (Changed)Changing the default setting of the web server function. IM04L42B01-02E, Section in IM04L41B01-17E(Added)Error messages, 513, 514, 515, and 516 have been number 2(Added)The waterproof construction of the DX front panel complies with the NEMA4 as edition 3 Added explanations.

8 Fixed the direction of the clamp input terminal (/H2 option).IM04L42B01-02 EivIM 04L42B01-01 EEditionDXAddition and change to functionsRefer to5 Release number 3(Version )Divided the setting mode displays with setting displaysAdded method for switching from setting mode to basic setting numeric input input displayAdded the ability to input the following characters: [ ] and :.Character string input displayAdded new input type (GOST; /N3 option).Section measurement range for TC Type Batch (/BT2 option).IM04L41B01-03 EAlarm level alarm (/F1 option).Section tag comments and 16-character tag display update trend interval changeable during 15-, 20-, and 30-minute event data sample and zone and that the DX is waiting for a point types Point and Comma.

9 Section favorite key searching with date and trend relative time display, auto span display, and top channel of batch text fields changed to start recording screen appears when you press the start key while using the batch contents of the system and network information on setting load CommentDisplay and FavoriteDisplay actions to the event action control contact input changed from operating on Close to operating on Open (/R1 and /PM1 options).Section time timer reset (/M1 and /PM1 Options).Section Year to match time timer conditions (/M1 and /PM1 options). Section time timer usable for TLOG computation (/M1 and /PM1 options).Section bar graphs for report data (/M1 and /PM1 options).Section recording condition variables to equations (/M1 and /PM1 options).

10 Section USB barcode reader support (/USB1 option).Section of data from the internal memory to USB flash memory or a CF card (/USB1 option).Section data searching, report layout display, a print button, and an FTP link to the Web server in IM04L41B01-17 EModbus register map expansion and floating-point data in IM04L41B01-17 EOnly send alarm e-mails when an alarm has in IM04L41B01-17 EAdded tag and channel number to alarm in IM04L41B01-17EE-mail transfer authentication (Pop Before SMTP).Section in IM04L41B01-17E C displayed in e-mails and the Web in IM04L41B01-17 EAdded the ability to input the square and cube characters ( and ) in communications (only for English, German, and French).Appendix 3 in IM04L41B01-17 EAdded FTP data transfer wait in IM04L41B01-17 EFTP server directory output format can be set to MS-DOS and UNIX.