Transcription of Differential (Dynamic) Scale Loop - f5-tech.de
1 Production engineers who are responsible for the design , operation and efficiency of water handlingsystems are familiar with the fact that thermal, pressure or chemical changes lead to Scale Differential Scale loop by F5 Technologie provides an accurate, reproducible and fast method forselecting and quantifying the most effective means of controlling Scale deposition under instrument is suitable to simulate process or reservoir temperatures of up toand pressuresup to/. Higher ratings can be provided if required. Anisavailable. The system is very recommended where effects of pressure on scaling tendency are to bestudied, and especially for examining the deposition of anhydride under dynamic system is equipped with an adjustable back pressure valve which keeps the absolute pressure inthe system constant.
2 The 3 high pressure, high precision HPLC pumps can have PEEK or stainlesssteel heads. Each pump delivers just one fluid - anionic brine, cationic brine, inhibitor -, which providesmaximum accuracy. The 3 fluids are mixed automatically and flow through the exchangeable test pipeline is installed in a PC controlled oven withglass window for full control of the setup during the high-precision Differential pressure transducer monitorsthe pressure drop across the test pipeline. Exceeding the setdifferential pressure limit indicates Scale formation. If thislimit is not exceeded within a set time, the system switchesdynamically to the next lower inhibitor concentration.
3 Afterthe test, the system cleans itself automatically with twocleaning automated test procedure enables 24 h use of the instrument with minimal C1000 bar 14,500 psiintegrated pH probeDifferential (Dynamic) Scale LoopFor evaluation of scaling tendency and inhibitor performanceAdjustable system pressureup to()High-precision differentialpressure measurementMax. temperature 250 CCooling device availableLine filteringIn-line pH probe availableAutomated testing / cleaningPC software for test planningTouch screen displaySmall footprintErgonomic design1,000 bar 14,500 psi3 HP pumps with PEEK headsTel:FaxEmail:Web:TechnologieF5 Technologie GmbHIm B chenorte 3D-31515 WunstorfGermany+49 5031 68793 68793 , absolute and Differential pressure5 or ml/min max, accuracy 2 l/min100/200/400 bar with stainless steel or PEEK pump heads600/1,000 bar with stainless steel pump heads5 bar (73 psi) max10 and 20 bar availableStandard PC with Windows 9x/NT/2k/XP/7 WinDSL , test planning and data visualisation/storage240 VAC @ 50/60 Hz, 120 VAC @ 60 Hzalternatives available2000 W maxData interface:Data acquisition:Flow rate:Absolute pressure: Differential pressure:PC required:Software:Power supply:Power consumption:Technical Data.
4 Glass door for permanent visualcontrol of heating and test coilsOven with fan for forced air circulationPLC with touch screen and big data displayTel:FaxEmail:Web:TechnologieF5 Technologie GmbHIm B chenorte 3D-31515 WunstorfGermany+49 5031 68793 68793
