Dimensions: [mm] Recommended Land Pattern: …

1 Dimensions: [mm]2,78 0,37,4 0,310 0,34,2 - 3:1 Product Marking:Start of Winding Marking100 (Inductance Code) Recommended land Pattern: [mm]4,67,21,8 Scale - 3:1 Schematic:Electrical Properties:PropertiesTest kHz/ 1 V10 H 30%Rated CurrentIR T = 30 CurrentISAT| L/L| < 35 % ResistanceRDC@ 20 C40m ResistanceRDC@ 20 C53m Resonant :RoHS ApprovalCompliant [2011/65/EU&2015/863]REACh ApprovalConform or declared [(EC)1907/2006]Halogen FreeConform [JEDEC JS709B]Halogen FreeConform [IEC 61249-2-21]General Properties:It is Recommended that the temperature of the component does not exceed +125 C under worstcase conditionsAmbient Temperature (referringto IR)-40 up to +95 COperating Temperature-40 up to +125 CStorage Conditions (in originalpackaging)< 40 C ; < 75 % RHMoisture Sensitivity Level (MSL)1 Test conditions of Electrical Properties: +20 C, 33 % RH if not specified differentlyW rth Elektronik eiSos GmbH & Co.

2 KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - (YYYY-MM-DD)GENERAL ISO 2768-1mDESCRIPTIONWE-TPC SMT Shielded Tiny PowerInductorORDER CODE744065100 SIZE/TYPEBUSINESS UNITSTATUSPAGE1028eiSosValid1/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover W rth Elektronik eiSos GmbH& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network W rth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage.

3 In addition, sufficient reliability evaluation checks for safetymust be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or Inductance vs. Current [ H]Current [A]Typical Impedance [ ]Frequency [MHz]ZW rth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - (YYYY-MM-DD)GENERAL ISO 2768-1mDESCRIPTIONWE-TPC SMT Shielded Tiny PowerInductorORDER CODE744065100 SIZE/TYPEBUSINESS UNITSTATUSPAGE1028eiSosValid2/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.

4 Moreover W rth Elektronik eiSos GmbH& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network W rth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safetymust be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or Specification - Tape and Reel: [mm]EndFeeding directionStartP2P0E1TT1D0 Top Cover TapeE2 WFP1A0D1K0T2 Cover TapeCarrier TapeNo Tapemin. 400mmAApackaging is reffered to the international standard IEC 60286-3:2013A0B0WP1TT1T2D0E1E2FP0P2 Tape TypeVPE / packaging +0,3 -0,1 0,1 0, +0,3 -0,1 0,1min.

5 0,05 0,1 0, , ,0016, ,1031,501,7522,2511,504,002,00 Polystyrene1000165 - 180 Pull-of forceTape width24 mm0,1 N - 1,3 NBDCW1close to centerW3W2 NAdetail BCover TapeChip CavitySprocket HoleEmbossmentBABCDNW1W2W3W3 Tolerance 2, 2,0+ 2, width24mm330,001,5012,8020,2060,0024,403 0,4023,9027,40W rth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - (YYYY-MM-DD)GENERAL ISO 2768-1mDESCRIPTIONWE-TPC SMT Shielded Tiny PowerInductorORDER CODE744065100 SIZE/TYPEBUSINESS UNITSTATUSPAGE1028eiSosValid3/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.

6 Moreover W rth Elektronik eiSos GmbH& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network W rth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safetymust be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or Reflow Profile for SMT components:TimeTemperatureTptptLtSTs maxTs minTC 5 CTL25 Time 25 C to PeakPreheat AreaMax. Ramp Up RateMax. Ramp Down RateClassification Reflow Soldering Profile:Profile FeatureValuePreheat Temperature MinTs min150 CPreheat Temperature MaxTs max200 CPreheat Time ts from Ts min to Ts maxts60 - 120 secondsRamp-up Rate (TL to TP)3 C/ second TemperatureTL217 CTime tL maintained above TLtL60 - 150 secondsPeak package body temperatureTpTp Tc, see Table belowTime within 5 C of actual peaktemperaturet p20 - 30 secondsRamp-down Rate (TP to TL)6 C/ second 25 C to peak temperature8 minutes to IPC/ JEDEC J-STD-020 EPackage Classification Reflow Temperature (Tc).

7 PropertiesVolume mm <350 Volume mm 350-2000 Volume mm >2000PB-Free Assembly | Package Thickness< mm260 C260 C260 CPB-Free Assembly | Package mm - mm260 C250 C245 CPB-Free Assembly | Package Thickness mm250 C245 C245 Crefer to IPC/ JEDEC J-STD-020EW rth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - (YYYY-MM-DD)GENERAL ISO 2768-1mDESCRIPTIONWE-TPC SMT Shielded Tiny PowerInductorORDER CODE744065100 SIZE/TYPEBUSINESS UNITSTATUSPAGE1028eiSosValid4/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.

8 Moreover W rth Elektronik eiSos GmbH& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network W rth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safetymust be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or and Warnings:The following conditions apply to all goods within the product series of WE-TPC ofW rthElektronik eiSos GmbH & Co. KG:General: This electronic component is designed and manufactured for use in general electronic equipment.

9 W rth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into anyequipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control,ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability areespecially required and/or if there is the possibility of direct damage or human injury. Electronic components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer. The component is designed and manufactured to be used within the datasheet specified values. If the usage and operation conditionsspecified in the datasheet are not met, the wire insulation may be damaged or dissolved.

10 Do not drop or impact the components, the component may be damaged. W rth Elektronik products are qualified according to international standards, which are listed in each product reliability report. W rthElektronik does not warrant any customer qualified product characteristics beyond W rth Elektroniks specifications, for its validity andsustainability over time. The responsibility for the applicability of the customer specific products and use in a particular customer design is always within theauthority of the customer. All technical specifications for standard products also apply to customer specific specific:Soldering The solder profile must comply with the technical product specifications. All other profiles will void the warranty. All other soldering methods are at the customers own risk.