DINnectors Disconnect Terminal Blocks - AutomationDirect

1 Knife-blade DisconnectDN-KBD12 Series: EURO Amp DisconnectDN-DIS10 Series: EURO S 4LH/35 Disconnect Terminal BlocksOrdering InformationPart NumberPcs/PkgPricePart NumberPcs/PkgPriceGray Disconnect BlockDN-DIS1050$ $ $ $ SpecificationsStripping Length10mm [ in]10mm [ in]Tightening N m [ lb in] N m [ lb in]Density125/m [30 pcs/ft]200/m [60 pcs/ft]UL Approval*300V30A24-10 AWG600V20A22-12 AWGCSA Approval300V25A18-12 AWG600V16A18-12 AWGVDE Approval500V25A4mm mm Disconnect TypeCopper barCopper bladeOperating TemperatureAmbient air temperature: -20 C to 85 C [-4 F to 185 F] Relative humidity: 50% max at 40 C [104 F].

2 90% max at 20 C [68 F]SCCR Rating10kA per Table , 2009, UL 508A, Maximum short circuit current rating for unmarked componentsCE ConformityCE (EN 60947-1 / EN 60947-7-3)CE (EN 60947-1 / EN 60947-7-1)Agency File #UL E179129 / LR84816 Note: To obtain the most current agency approval information, see the Agency Approval Checklist section on the specific part number's web CoverIncludedDN-ECKBD100$ $ DIN mm highDN-R35S110$ $ $ $ $ $ $ $ BracketDN-EB3550$ $ $ $ $ $ $ $ $ $ $ $ Support BracketDN-ASB150$ $ TagsDN-L or DN-LT series500/100variousDN-LA or DN-LT series500/100various*For copper wire onlyNote.

3 For more information on accessories, see the DINnectors Accessories section of this the DN-DIS10 (MN) and the DN-KBD12 (MN) allow fast circuit disconnection without rewiring and are 35mm DIN-rail mountable. The DN-DIS10 (MN) is supplied with a copper disonnect bar installed in the fuse holder. The DN-KBD12 (MN) offers circuit disconnection capability by means of a pivoting, insulated knife blade .44 mm[ in]66 mm[ in]10 mm[ in]DN-DIS10 / DN-DIS10MN52 mm[ in]5 mm[ in]35 mm[ in]DN-KBD12 / DN-KBD12MN WARNING.

4 DO NOT Disconnect UNDER LOAD1-800-633-0405 Terminal BlockstTBL-58 For latest prices, please check marking Tags Cross Reference - Screw-typeBlock TypeDN-LDN-LADN-LTDN-LATDN-EMLBLDN-T12 XXDN-T10 XXDN-T8 XXDN-T6 XXDN-T4 XXDN-T1/0 XXDN-T3/0 XXDN-D10 XXDN-D10 XXXDN-D10 LEDXXDN-D10 DRXXDN-TL14 XDN-THERMXXDN-EMXM1 XXXDN-EMXDVXXXDN-M10 XDN-MG10 XDN-G10 XXDN-G8 XXDN-G6 XXDN-G4 XXDN-G1/0 XXDN-F6 XXDN-F10 XXDN-DIS2 XXDN-DIS4 XXDN-FE2 XXDN-FE4 XXDN-DIS10 XXDN-KBD12 XXAccessoriesMarking Tags Cross Reference Charts - Screw-typeContinued on next page1-800-633-0405 Terminal BlockstTBL-86 For latest prices.

5 Please check TagsMarking Tags DN-L SeriesPart# marking SequencePcs/Pkg PriceDN-L501-50 500$ 500$ 500$ 500$ 500$ 500$ 500$ 500$ $ 500$ L1, L2, L3, L, N, GND, +, -, COM,COM*500$ mm[ in]6 mm[ in]DimensionsNotes: 1. The marking sequence of 50 tags ( 101-150) is printed 10 times in each package of The DN-L tags fit all DINnectors 6mm wide and wider. There will be a gap between tags on Blocks wider than Material: Thermoplastic with heat embossed black : 1. The marking sequence of 100 tags ( 1-100) is printed five times in each package of The DN-LA tags fit all DINnectors 5mm wide and wider.

6 There will be a gap between tags on Blocks wider than Material: Thermoplastic with heat embossed black mm[ in]12 mm[ in]Dimensions6mm [ in]5mm [ in]DimensionsNotes: 1. The marking sequence of 500 tags ( 1-100) is printed five times in each package of Material: Thermoplastic with heat embossed black Tags DN-LA SeriesPart# marking SequencePcs/Pkg PriceDN-LA100 1-100 500$ 101-200 500$ 201-300 500$ 301-400 500$ Blank Tags500$ , L2, L3, L, N, GND, +, -, COM,COM*500$ Tags DN-LAT SeriesPart# marking SequencePcs/Pkg PriceDN-LAT100-A 1-100 500$ 101-200 500$ 201-300 500$ 301-400 500$ 500$ 500$ Tags500$ , L2, L3, L, N, +,-, COM,COM*500$ Tags DN-QL SeriesPart# marking SequencePcs/Pkg PriceDN-QL1001-100500$ 500$ 500$ 500$ 500$ Tags 500$ , L2, L3, L, N, +,-, COM,COM*500$ : 1.

7 The marking sequence of 500 ( 1-100) is printed five times in each package of Material: Thermoplastic with heat embossed black BlockstTBL-88 For latest prices, please check : 1. These marking tags allow the flexibility of creating custom marking sequences on The DN-M series supports a maximum of three digits (tags), while other DINnectors support up to four digits (tags).3. Material: Thermoplastic with heat embossed black mm[ in]3 mm[ in]DimensionsAccessoriesMarking Tags continuedDN-MTA dimensionsPart#DescriptionPcs/PkgPriceDN -MTAM arking tag adapter holds up to six DN-LT tags50$.

8 DN-MTA adapter does not fit DN-T12-A Terminal mm[ in] mm[ in]3 mm[ in]DN-MTA marking tag adapterMarking Tags DN-LT SeriesPart# marking SequencePcs/Pkg PriceDN-LT15 1-5 100 $ 6-0 100 $ 1 100 $ 2 100 $ 3 100 $ 4 100 $ 5 100 $ 6 100 $ 7 100 $ 8 100 $ 9 100 $ 0 100$ Unprinted 100 $ A 100 $ B 100 $ C 100 $ D 100 $ E 100 $ F 100 $ G 100 $ H 100 $ I 100 $ J 100 $ K 100 $ L 100 $ M 100 $ N 100 $ DN-LTP P 100 $ Q 100 $ R 100 $ S 100 $ T 100 $ U 100 $ V 100 $ W 100 $ X 100 $ Y 100 $ Z 100 $ $ + 100 $ - 100 $ ~ 100 $ = 100 $ BlockstTBL-89 For latest prices.

9 Please check pen DN-EMLBL1 Part #DescriptionFor Use WithPcs/PkgPrice EachDN-EMLBL1 Blank labelsDN-EMPEG1 pin protectors for DN-xEMXxx plug-in Terminal blocks100$ printed 1 12100$ printed 13 24100$ #DescriptionFor Use WithPcs/ PkgPrice EachDN-WMTAG1 Wire tag blankall DN-WM-x wire tag holders525$ tag holder, clear, 12mm length, in diameter; for 22 16 AWG wireDN-WMTAG1 200$ tag holder, clear, 12mm length, in diameter; for 16-11 AWG wire200$ tag holder, clear, 12mm length, in diameter; for 13 5 AWG wire100$ tag holder, clear, 12mm length, in diameter; for 5 AWG wire100$ wire tags & DN-WM-x wire tag holdersTerminal marking AccessoriesWire marking AccessoriesMarking Pen for Terminal and wire marking tags Permanent Smudge-proof Waterproof Weatherproof Lightfast (won t fade) Dries in seconds (excellent for left-handed users) Dry-safe (pen can be left uncapped for days without drying out) Low odor inkPart#DescriptionPcs/PkgPrice EachDN-MPIndelible black ink marking pen1 $ BlockstTBL-90 For latest prices, please check