DSE Genset DSE 4510/20 - IMSAB

1 PCThe dse4510 Auto Start ControlModule and the dse4520 AutoMains (Utility) Failure ControlModule are suitable for a widevariety of single gen-setapplications. Whilst maintaining functionsincluded within higher endcontrollers, such as generator orload power monitoring, theDSE45xx range of especiallycompact controllers provide theuser with the ultimate size tofeature engine speed, oilpressure, coolant temperature,frequency, voltage, current, powerand fuel level, the modules will givecomprehensive engine andalternator protection. This will beindicated on the largest back-litLCD icon display in its class via anarray of warning, electrical trip andshutdown J1939 (CAN) and non-electronic (alternator frequencysensing) engine support for diesel,gas and petrol engines all in onevariant. With a number of flexibleinputs, outputs and protections, themodule can be easily adapted tosuit a wide range of USB Communication bothmodules can be easily configuredusing the DSE Configuration SuitePC Software or can be fullyconfigured through the module'sfront panel DSE products are supported bythe DSE global tech nical supportteam which gives our customersand end users access to 24 hoursystem help and START AND AUTO MAINS FAILURECONTROL MODULES(ALTERNATOR FREQUENCY & CAN SPEED SENSING) 4 ISSUE 1 USBPORTDC OUTPUT(2 for dse4510 )CONFIGURABLEINPUTSDC POWER SUPPLY111ph2ph3ph1ph2ph3phNCOMPREHENSIVE FEATURE LIST TO SUIT A WIDE VARIETY OF GEN-SET APPLICATIONS7 OTHERDSE4510/20 MAINS (UTILITY)SENSING( dse4520 )GENERATORSENSIN GCHARGEALTERNATORFUEL AND STARTOUTPUTS(Flexible with CAN)

2 ELECTRONICENGINE CANANALOGUE SENDERSFEATURESENVIRONMENTAL TESTING STANDARDSELECTRO-MAGNETIC COMPATIBILITYBS EN 61000-6-2 EMC Generic Immunity Standard for the Industrial EnvironmentBS EN 61000-6-4 EMC Generic Emission Standard for the Industrial EnvironmentELECTRICAL SAFETYBS EN 60950 Safety of Information Technology Equipment, including Electrical Business EquipmentTEMPERATUREBS EN 60068-2-1Ab/Ae Cold Test -30 oCBS EN 60068-2-2Bb/Be Dry Heat +70 oCVIBRATIONBS EN 60068-2-6 Ten sweeps in each of three major axes5 Hz to 8 Hz at + mm, 8 Hz to 500 Hz at 2 gnHUMIDITYBS EN 60068-2-30Db Damp Heat Cyclic 20/55 oCat 95% RH 48 HoursBS EN 60068-2-78 Cab Damp Heat Static 40 oCat 93% RH 48 HoursSHOCKBS EN 60068-2-27 Three shocks in each of three major axes15 gn in 11 mSDEGREES OF PROTECTIONPROVIDED BY ENCLOSURESBS EN 60529IP65 - Front of module when installed into thecontrol panel with the optional sealing ++VOLTSDSEG enset++1ph2ph3phNVOLTSD +W/LDEUTZISUZUPERKINSCATERPILLARMTUVOLVO CUMMINSSCANIA4510-034510-044520-034520-0 4 Auto start with real time clockAuto start with real time clock &heated displayAuto Mains Failure with real timeclockAuto Mains Failure with real timeclock & heated display*AVAILABLE VARIANTSDC OUTPUT4520 1 OF 4DC OUTPUT4510 1 OF 24520 1 OF 4 GENERATOR /LOAD CURRENTSPECIFICATIONDC SUPPLYCONTINUOUS VOLTAGE RATING8 V to 35 V ContinuousCRANKING DROPOUTSAble to survive 0 V for 50 mS.

3 Providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal and backlight will not be maintained during OPERATING CURRENT85 mA at 12 V, 96 mA at 24 VMAXIMUM STANDBY CURRENT51 mA at 12 V, 47 mA at 24 VMAXIMUM SLEEP CURRENT35 mA at 12 V, 32 mA at 24 VMAXIMUM DEEP SLEEP CURRENT<10 uA at 12 V, <10 uA at 24 VMAINS (UTILITY) dse4520 ONLYVOLTAGE RANGE15 V to 415 V AC (Ph to N)26 V to 719 V AC (Ph to Ph)FREQUENCY Hz to 75 HzOUTPUTSOUTPUT A (FUEL)10 A short term, 5 A continuous, at supply voltageOUTPUT B (START)10 A short term, 5 A continuous, at supply voltageAUXILIARY OUTPUTS C & D2 A DC at supply voltage AUXILIARY OUTPUTS E & F DSE45202 A DC at supply voltage GENERATORVOLTAGE RANGE 15 V to 415 V AC (Ph to N) 26 V to 719 V AC (Ph to Ph)FREQUENCY Hz to 75 HzDIMENSIONSOVERALL140 mm x 113 mm x 43 x x PANEL CUT-OUT118 mm x 92 x MAXIMUM PANEL THICKNESS8 STORAGE TEMPERATURE RANGE-40 C to +85 C-40 F to +185 FOPERATING TEMPERATURE RANGE-30 C to +70 C-22 F to +158 F-40 C to +70 C (for heated display variant)-40 F to +158 F (for heated display variant)OPTIONAL PARTSPARTPART NUMBERIP65 Gasket020-282 DEEP SEA ELECTRONICS PLC UKHighfield House, Hunmanby Industrial Estate, Hunmanby YO14 0 PHTELEPHONE+44 (0) 1723 890099 FACSIMILE +44 (0) 1723 SEA ELECTRONICS INC USA3230 Williams Avenue, Rockford, IL 61101-2668 USATELEPHONE+1 (815) 316 8706 FACSIMILE +1 (815) 316 WEBSITE (7)KEY BENEFITS Ultimate size to feature ratio Automatically transfers betweenmains (utility) and generator( dse4520 only)

4 Hours counter provides accurateinformation for monitoring andmaintenance periods User-friendly set-up and buttonlayout for ease of use Multiple parameters aremonitored simultaneously whichare clearly displayed on thelargest back-lit icon display inits class The module can be configuredto suit a wide range ofapplications Uses DSE Configuration SuitePC Software for simplifiedconfiguration Compatible with a wide rangeof CAN engines Licence-free PC software IP65 rating (with optionalgasket) offers increasedresistance to water ingressKEY FEATURES Alternator frequency & CANspeed sensing in one variant Largest back-lit icon display inits class Heated display option Real time clock providesaccurate event logging Fully configurable via the fasciaor PC using USBcommunication Extremely efficient power savemode 3 phase generator sensing 3 phase mains (utility) sensing( dse4520 only) Compatible with 600 V ph to phnominal systems Generator/load powermonitoring (kW, kV A, kV Ar, pf) Accumulated power monitoring(kW h, kVA h, kVAr h) Generator overload protection(kW) Generator/load currentmonitoring and protection Fuel and start outputs(configurable when using CAN) 4 configurable DC outputs (2 forDSE4510) 3 configurable analogue/digitalinputs 4 configurable digital inputs Configurable staged loadingoutputs 3 engine maintainance alarms Engine speed protection Engine hours counter Engine pre-heat Engine run-time scheduler Engine idle control for starting &stopping Battery voltage monitoring Start on low battery voltage Configurable remote start input 1 alternative configuration Comprehensive warning,electrical trip or shutdownprotection upon fault condition LCD alarm indication Event log (50)

5 RELATED MATERIALSTITLEPART NO SDSE4510/20 Installation Instructions053-157 dse4510 /20 operator Manual057-171 dse4510 /20 Configuration Suite PC Manual057-172 Registered in England & Wales Sea Electronics Plc maintains a policy of continuous development and reserves the right to changethe details shown on this data sheet without prior notice. The contents are intended for guidance START AND AUTO MAINS FAILURECONTROL MODULES(ALTERNATOR FREQUENCY & CAN SPEED SENSING)