Entering Program Mode for Vehicle Security and …

1 Page 1 of 9 Kit Part # s:7L2Z-19G364-AAAL2Z-19G364-A9G1Z-19G364 -AAG1Z-19G364-A7L5Z-19G364-AA9L5Z-19G364 -A7W3Z-19G364-AAAW3Z-19G364-A9C3Z-19G364 -AAAC3Z-19G364-AAL1Z-19G364-BAL1Z-19G364 -AAG1J-19G364-FA7L2J-19G364-CD8L5J-19G36 4-ADRev A. 2/10 System 100 Keyless Entry Remote Start System(1 Way and 2-Way Remote Start Systems) Entering Program Mode for Vehicle Security and Remote Start SystemsVehicleYearVehicleYearAviator2007 Focus2007 - 2010 Crown Vic/Grand Marquis2007 - 2010 Freestar/Monterey2007F-1502007 - 2010 Fusion/Milan/HEV2007 - 2010F-250 Super Duty2007 - 2010 Mustang2007 - 2010 Econoline2007 - 2010 MKS (Non-Intelligent Key)

2 2009 - 2010 Edge/MKX2007 - 2010 MKZ2008 - 2010 Escape/Mariner/HEV2007 - 2010 Ranger2007 - 2010 Expedition/Navigator2007 - 2010 Taurus/Sable/Taurus X2008 - 2009 Explorer/Mountaineer/Sport Trac2007 - 2010 Taurus (Non Intelligent Key) 2010 FiveHundred/Freestyle/Montego2007 Town Car2007 - 2010 Flex2009 - 2010 Transit Connect2010 Focus2007 - 2010 Zephyr2007 Refer to Page 4 for: 7L3Z-19G364-AA & AL3Z-19G364-A (System 200)Refer to Page 8 for: AA5Z-19G364-A & AA5Z-19G364-B (PEPS)Page 2 of 9 Step 1. Close all doors and 2.

3 Press and hold the BRAKE 3. Insert the key into the ignition cylinder and turn to the ON/RUN 4. Locate and press the remote start system override button for 10 seconds. After 10 seconds the horn will honk3 times and the lights will flash 3 times, indicating that the system is now in Transmitter Learn 5. Release the brake pedal and the system override 6. Press and release the remote start system override button 1 time. The horn will honk 4 times and the lights willflash 4 times indicating that the system is now in Bank 1 of the programming 7.

4 Press and release the brake pedal 1 time. The horn will honk 1 time and the lights will flash 1 time, indicatingthat the system is now at the first programable option. Refer to the Option Programming Chart on thenext page for available options and 8. To advance to the next option, press and release the brake pedal. The horn will honk 2 times and the lights willflash 2 times indicating that the system is now at the 2nd programmable option. Repeat for additional optionswithin 9. To advance to Bank 2 programming options, press and release the remote start system override button onetime.

5 The horn will honk 5 times and the lights will flash 5 times indicating that the system is now in Bank 2 ofthe programming 10. Refer to the Option Programming Chart and repeat Step 7 and Step 8, if 11. Once programming is complete, turn off : Transmitters can be programmed by pressing the (Lock) button (1-Way) or the (Start)button (2-Way) one time for each transmitter. Up to 8 transmitters may be : Locate the connected to the remote start harness before :Options can be changed by pressing the (Lock) button (1-Way) or the (Start) button (2-Way)one time.

6 The will turn on and off depending on the desired option. Items in BOLD are 100 Keyless Entry Remote Start System(1 Way and 2-Way Remote Start Systems)Page 3 of 9 OptionDescripition Learn2 Door Trigger PolarityPositiveNegative3 Key-In-Sense PolarityPositiveNegative4 Extended Horn HonkONOFF1 Blind CrankONOFF2 Crank Time8 Time10min15min41 Press to Start (2 press if OFF)**ONOFF5 Diesel ModeO NOFF6 Horn Start ConfirmationONOFF7 Not UsedONOFF8 Not UsedONOFFBank 1 Bank 2 Options in Bold are factory Programming ChartONOFF** 1-Way Remote Start Systems are set to factory default of Press and Hold for Remote Start Systems are set to factory default of 2 Presses for 100 Keyless Entry Remote Start System(1 Way and 2-Way Remote Start Systems)

7 Page 4 of 9 System 200 Keyless Entry Security w/ Remote Start SystemEntering Program Mode for Vehicle Security and Remote Start Systems Kit Part # s:7L3Z-19G364-AAAL3Z-19G364-AVehicleYear Aviator2007 Crown Vic/Grand Marquis2007 - 2010F-1502007 - 2010F-250 Super Duty2007 - 2009 Econoline2007 - 2010 Edge/MKX2007 - 2010 Escape/Mariner/HEV2007 - 2010 Expedition/Navigator2007 - 2008 Explorer/Mountaineer/Sport Trac2007 - 2010 FiveHundred/Freestyle/Montego2007 Flex2009 Focus2007 - 2009 Freestar/Monterey2007 Fusion/Milan2007 - 2009 Mustang2007 - 2010 Ranger2007 - 2010 Taurus/Sable/Taurus X2008 - 2009 Town Car2007 - 2010 Page 5 of 9 Step 1.

8 Insert the key into the ignition cylinder and turn to the ON/RUN 2. Locate and press the remote start system override button for 10 seconds. After 10 seconds the horn will honk3 times and the lights will flash 3 times, indicating that the system is now in Transmitter Learn 3. Release the system override 4. Press and release the remote start system override button 1 time. The horn will honk 4 times and the lights willflash 4 times indicating that the system is now in Bank 1 of the programming 5.

9 Press the (Panic) button 1 time. The horn will honk 1 time and the lights will flash 1 time, indicatingthat the system is now at the first programable option. Refer to the Option Programming Chart on thenext page for available options and 6. To advance to the next option, press the (Panic) button. The horn will honk 2 times and the lightswill flash 2 times indicating that the system is now at the 2nd programmable option. Repeat for additionaloptions within 7. To advance to Bank 2 programming options, press and release the remote start system override button onetime.

10 The horn will honk 5 times and the lights will flash 5 times indicating that the system is now in Bank 2 of the programming 8. Refer to the Option Programming Chart and repeat Step 5 and Step 6, if 9. To advance to Bank 3 programming options, press and release the remote start system override button one time. The horn will honk 6 times and the lights will flash 6 times indicating that the system is now in Bank 3 of the programming 10. Refer to the Option Programming Chart and repeat Step 5 and Step 6, if 11.