Example: bankruptcy
Environmental and economic benefits of the use of polymer ...
3. Report on asphalt mixtures using RA containing polymer modified binder 4. Report on microscopy analyses of RA and asphalt mixes made in the laboratory 5. Report on the benefits of asphalt using polymer modified RA 6. Final report that summarises all the results and presents further research needs
Tags:
Information
Domain:
Source:
Link to this page:
Related documents
22 Spec - 460 Hot Mix Asphalt Pavement
wisconsindot.govasphaltic binder. Design mixtures conforming to table 460-1 and table 460-2. (2) Determine the target JMF asphalt binder content for production from the mix design data corresponding to 3.0 percent air voids (97 percent Gmm) target at the design number of gyrations (Ndes). Add liquid asphalt to achieve the required air voids at Ndes.
Road Pavement Design Guide
www.kent.gov.uk• Hot rolled asphalt roadbase has been discontinued. Whilst a design based on DBM50 is the norm, ... site for capping layer, sub-base or roadbase by using a permitted binder. In addition, the use of construction materials from sources that maximise the amount of recycled materials is strongly encouraged.
STANDARD SPECIFICATIONS for CONSTRUCTION and …
www.roads.maryland.govAug 21, 2004 · 504-Asphalt Pavement 517 505-Asphalt Patches 533 506-Gap-Graded Stone Matrix Asphalt 538 507-Slurry Seal and Micro-Surfacing 542 508-Milling Asphalt Pavement 551 509-Diamond Griding 555 510-Filling and Sealing Cracks and Joints in Asphalt Pavements 557
Specification for the Reinstatement of Openings in ...
assets.publishing.service.gov.ukA2.1 Hot rolled asphalt (HRA) mixtures 111 A2.2 Stone mastic asphalt (SMA) mixtures 114 A2.3 Asphalt concrete mixtures 115 A2.4 Cold-lay surfacing materials 117 A2.5 Flowable materials 117 A2.6 Reinstatement materials for micro trenches 120 A2.7 Structural layer thickness tolerances 121 A2.8 Compacted lift thickness 122