EPOXY / POLYAMIDE GREEN PRIMER FORMULA …

1 BOX 717 THEODORE, ALABAMA 36590 -0717 PHONE (251) 443-6110 FAX (251) 408-0410 PRODUCT DATAPRODUCTDESCRIPTIONTYPICAL USESPRODUCTADVANTAGES40-CM-7 GLOSSCOLORSAPPLICATIONSHIPPING &STORAGEPHYSICALCONSTANTSEPOXY / POLYAMIDE GREEN PRIMERFORMULA 150, TYPE IVMIL-DTL-24441/29 (40-CM-7) EPOXY / PolyamideA two component, high performance EPOXY / POLYAMIDE PRIMER . Meets therequirements of MIL-DTL-24441 application to sandblasted steel, aluminum, or fiberglass components of for interior or exterior surfaces. For bilges, tanks, underwater hulls and othersurfaces requiring a high performance coating EPOXY POLYAMIDE PRIMER is formulated to provide a hard, durable, chemicallyresistant,non-porous coating for application of subsequent high performance finish VOC and lead free.

2 Meets the requirements of MIL-DTL-24441 150 GREEN 24272 EggshellNonvolatile -By weight - + volume - + (Calculated) grams/literFlash Point -(A) 99 F minimum (Setaflash)(B) 115 F minimum (Setaflash)Mixing Ratio -1:1 by volumeWeight per gallon - (A) + lbs.(B) + Film Thickness - mils dry, mils Coverage @ mils dry - 346 sq. - Brush, roll, conventional and airless - MoPoxY 241 Thinner time @ 75 F - To touch - 2 hours handle - 8 hours recoat - 24 hoursPot life @ 75 F - 6 hoursInduction time - 1 hour @ 75 FConsists of - 2 Gallon Unit 10 Gallon UnitPart (A) 1 gallon 5 gallonPart (B) 1 gallon 5 gallonUnit Shipping Weight 25 lbs.

3 120 Life - 12 months minimum from date of manufacture when maintained inprotected storage @ 40-100 F (subject to reinspection thereafter).APPLICATION INSTRUCTIONSLIMITED WARRANTYThe successful performance of this product is highly dependent on many factors beyond our control. Results are highly dependent upon the skill of the operator. This product ismanufactured to meet the highest level of consistency and quality for the intended use. Mobile Paint warrants that its products meet the specifications which it sets for them. Shouldthis product be proven to be off-specification within one year from date of shipment, Mobile Paint will, at its sole discretion, either replace the product or issue credit for the originalpurchase price of the product.

4 The replacement or refund shall be the buyer s sole remedy and Mobile Paint and its affiliates MAKE NO OTHER WARRANTY OR GUARANTEE,EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY, DESIGN COMPATIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. LABOR OR COST OF LABOR ANDOTHER INCIDENTAL AND/OR CONSEQUENTIAL DAMAGES ARE SPECIFICALLY EXCLUDED. The technical data contained herein are true and accurate to the best of ourknowledge. Published technical data and instructions are subject to change without prior time @ 70 F before using the coating. Usable potlife depends on the temperature of the material. Refer to PotLife section on front page. Agitate before use. Occasionalstirring during use is time - @ 50-60 F -- 1 1/2 hours@ 61-75 F -- 1 hour@ 76-80 F -- 1/2 to 1 hour@ 81-90 F -- 1/2 hourabove 90 F -- noneThinning: Material is supplied at spray viscosity and normallyrequires no thinning.

5 If thinning is necessary thin with up to10% with MoPoxY 241 Thinner 43-EF-94 per : Spray application is preferred for proper film buildand best performance. Brush application is acceptable fortouch up. Roller application may require special care toprevent bubbling and may require more than one coat to attainproper film thickness. Apply at mils wet film thickness toachieve mils dry film : Conventional spray - DeVilbiss MBC gun with E tipand 30 air cap or equal at 40-45 psi atomizing pressure and10-15 psi pot pressure, 3/8" ID product hose, double regulatedpressure pot with oil and moisture separator. Airless spray -Minimum of 30:1 ratio pump, .015" to .017" tip, 3/8" ID Teflonmaterial : During lunch, breaks or any period of work stoppage,material should be removed from hoses and pressure from equipment and flush hoses andequipment with MoPoxY 241 Thinner 43-EF-94.

6 Do not repres-surize equipment until ready to resume : Clean all equipment immediately after use withMoPoxY 241 Thinner 43-EF-94. Completely flush all sprayequipment with this solvent. Occasional flushing of sprayequipment during the course of the working day helps preventbuildup and possible : Safe storage, handling and use dictate that adequatehealth and safety precautions be observed with this productand any recommended thinners. User is specifically directedto consult the current Material Safety Data Sheet for thisproduct as well as precautions contained on product : The technical data contained herein are true andaccurate to the best of our knowledge. All products are offeredand sold subject to Mobile Paint Manufacturing Company sStandard Conditions of Sale.

7 Published technical data andinstructions are subject to change without prior (11/03)Consult your Mobile Paint Representative for the protectivecoating system best suited for your : Apply in good weather when air and surfacetemperature are above 50 F and surface temperature is atleast 5 F above the dew point. For optimum applicationproperties, material should be between 70 to 100 F prior tomixing and application. Maintain unmixed material in closedcontainers in protected storage at 40-100 Preparation: Good surface preparation is essentialto a satisfactory coating system. Surfaces to be coated shouldbe clean and dry. Remove all oil, grease, mildew of othercontamination by solvent or detergent cleaning or other effec-tive or Unfinished Surfaces - Ferrous Metal: For best perfor-mance, application to abrasive blasted surface isrecommended.

8 Commercial Blast Cleaning SSPC-SP6 isrecommended as the minimum. For immersion service Near White Blast Cleaning SSPC-SP10 is considered mini-mum. Proper blast media and blasting equipment shall beused to produce an average profile depth of mils not reuse abrasive media. Remove blasting dust and gritfrom surfaces before painting. Blasted surfaces should becoated within 8 hours after blasting or before rusting or othercontamination of the surface occurs. If blasting is not feasible,remove rust by Hand or Power Tool Cleaning (SSPC-SP2 or-SP3). Galvanized metal: Remove oil and prime with VinylWash PRIMER 9-42. Aluminum: Clean thoroughly and etch withphosphoric acid based cleaning solution.

9 Rinse well andallow to dry. Concrete - Must be clean, dry, properly cured andfree from all surface contaminants. Brush off Blast (SSPC-SP7) to provide an etched surface and to remove contaminantsand laitance. Remove dust before Finished Surfaces - Repair all damaged gloss from previous paint by sanding or BrushBlasting (SSPC-SP7). Remove rust, corrosion products,heavy chalk and loose or peeling paint by Hand or Power ToolCleaning (SSPC-SP2 or -SP3). Spot prime any bare areas asin new work above. If doubt exists concerning compatibility ofthis coating with the previous system, apply coating to arepresentative area (25 square feet minimum) and allow tocure and age several weeks.

10 Then inspect for adhesionfailure, wrinkling, lifting, blistering or any other sign ofincompatibility. If there are no signs, coating work can : This is a two component coating supplied in twocontainers as a unit. Always mix a complete unit in theproportions supplied. (1) Mix the contents of 40-CM-7A (Com-ponent A) thoroughly with a power agitator. (2) Mix the contentsof 40-CM-7B (Component B) thoroughly with a power agitator.(2) Combine the entire contents of Component A and Compo-nent B and mix thoroughly with a power agitator. Allow a 1 hour