Fail-Safe - Cooper Industries

1 Fail-SafeCatalog # Type Date Project Comments Prepared by SPECIFICATION FEATURESM ountingRecessed grid for 1 or 1 1/2 NEMA Type G ceiling systems. Overlapping door compatible with 2 wide ceiling systems, with standard on-center spacing (1 x 4, 2 x 2, 2 x 4). Recessed flange for use with hard-pan ceilings. Optional mounting safety clips (4) available. Surface mount using (4) , heavy gauge steel, powder coat painted white. Seam-welded construction, absent of holes. Optional stainless steel (Type 304 or 316) or door, constructed of one piece die-formed steel, stainless steel (304 standard, 316 optional) or aluminum. Inset door, constructed of die-formed steel, stainless steel (304 standard, 316 optional), or aluminum.

2 All doors attached to the housing with two stainless steel aircraft , countersunk stainless steel Philips head screws secure door frame to the to Door Frame: One piece continuous closed-cell silicone gasket seals lens to door Frame to Housing or Ceiling: One piece continuous closed-cell to Grid: Closed-cell silicone 12 acrylic, thick, inverted. Other lenses available, including polycarbonate and available in 2000K, 2700K, 3000K, 3500K, 4000K, and 5000K with 85 CRI. Red (630nm) LEDs available. Life is 50,000 hours at 70% lumen , standard 0-10V gloss, electrostatically applied, white powder coat finish, average minimum reflectance 92%.Compliance/RatingsClass 100 ISO Class 5-8IP66 NSF=NSF2 Listed (Non-food, splash zone)LabelsETL listed for wet locations under covered LED Sealed/ CleanroomVivarium / DarkroomRECESSED FLANGE RECESSED GRID SURFACE2x4/2x21x4/1x2/1x1 Inset or Overlapping DoorWet LocationIP66 RatedISO Class 5, 6, 7, 8 NSF Rated PS519020EN4-23-18 Fail-Safe s LED sealed enclosure product is available with overlapping and inset doors.

3 Available in 1 x 1, 1 x 2, 1 x 4, 2 x 2 and 2 x 4 sizes, the CLP Series cleanroom fixtures are Class 100 rated (English 209E), ISO Class 5-8 rated, IP66 compliant, absent of holes for a robust seal from above the ceiling, and NSF rated. Overlapping door compatible with 2" wide ceiling systems, with standard on-center spacing (1 x 4, 2 x 2, 2 x 4).DESCRIPTION2' x 2'2' x 4'No. of Modules, LevelInput WattsDelivered Lumens*No. of Modules, LevelInput WattsDelivered Lumens* * Approximate delivered lumens, 4000K.* Verify with actual photometric test reports.* A12125 ' x 2 No. of Modules, LevelInput WattsDelivered Lumens* ' x 4'No.

4 Of Modules, LevelInput WattsDelivered Lumens* Approximate Color Temperature and dimensions subject to change without 1121 Highway 74 SouthPeachtree City, GA 30269P: NUMBERS: CLPF-12-4-ALH-INA-A12125-LD4-2 STD-40-UNV-EDC2-AMD (White only) CLPG-24-2-ALH-INA-A19156-LD4-4 STD-50-UNV-EDC1-EL10W-DF-AMA (White only) ProductFamilySeriesCLPF=Recessed 2 FlangeCLPFE=RecessedFlange Extended 2 CLPG=Recessed Grid(1", 1-1/2", 2" NEMA G) 3,6 CLPS=Surface (available in 1x4, 2x2, and2x4)EL7W=7W EM PackEL10W=10W EM PackEL14W=14W EM PackAMA=Anti-microbial, All Parts (Not avaialable with stainless brushed door or housing)AMD=Anti-microbial, Door OnlyDF=Diffusing FilmMSB4=Mounting Safety Brackets(4) with Hardware24=24" Wide12=12" WideAccessories MSB4-PK=Mounting Safety Brackets(4)

5 With HardwareWidthLength1=1' Length2=2' Length4=4' LengthHousing MaterialBlank=Cold Rolled Steel, PowderCoat Painted WhiteALH=Aluminum Housing,Painted Powder Coat WhiteSHB=Stainless Steel (304) BrushedSH316B=Stainless Steel (316) BrushedSHP=Stainless Steel (304)Powder Coat Painted WhiteSH316P=Stainless Steel (316)Powder Coat Painted WhiteDoor TypeInset Die Formed, One PieceINS=Inset Door,Die-formed Steel,Painted WhiteINA=Inset Door,Die-formed Aluminum,Painted WhiteINSSP=Inset Door,Die-formed StainlessSteel, Painted White (Replace P with Bfor Brushed)INSS316P=inset Door,Die-formed StainlessSteel (316) Painted White (Replace P with Bfor Brushed)Overlapping, One Piece 6 OLS=Overlapping Door,Die-formed Steel,Painted WhiteOLA=Overlapping Door,Die-formed Aluminum,Painted WhiteOLSSP=Overlapping Door,Die-formed Stainless Steel, Painted White - (Replace P with B for Brushed)OLSS316P=OverlappingDoor, Die-formed StainlessSteel (316), Painted White (Replace P with B forBrushed)LensA12125=Pattern 12 Acrylic, " Thick,InvertedA19156=Pattern 19, " Thick, InvertedP12125=Pattern 12 Polycarbonate, "Thick, InvertedOther Lenses / thicknessesavailable, consult factory or the Lens Ordering Guideon web-siteLEDsLD4=Linear LED, Version of LEDs1=(1) LED Module in X-section2=(2) LED Modules in X-section3=(3)

6 LED Modules in X-section (2' Width Only)4=(4) LED Modules in X-section (2' Width Only)5=(5) LED Modules in X-section (2' Width Only)Illumi-nationLevelSTD=StandardLO=Lo wHI= (White LEDs only)27=2700K (White LEDs only)30=3000K (White LEDs only)35=3500K (White LEDs only)40=4000K (White LEDs only)50=5000K (White LEDs only)R63=Red, 630nm (Red LEDs only) Voltage120=120V277=277 VUNV=120-277 VDriverEDC_=Electronic Driver, Non-DimmingEDD_=Electronic Driver, 0-10V Dimming,10%ED1D_ Electronic Driver, 0-10V Dimming,1% Options 1. 4 and 5 Circuits only available with 4 length fixtures. 2. Flange and extended flange ship standard with (4) Swing-out brackets for quick and easy installation.

7 3. Hard metric fixtures available (600mm x 600mm, 300mm x 1200mm, 600mm x 1200mm). Consult product technical support to verify ceiling compatibility (Main-T height and width, Cross-T height and width, other related specifications). 4. Emergency requires backbox on fixture top, which adds approximately 3 to fixture height. 5. Emergency not available on CLPS (surface mount). 6. Compatible with 2" wide ceiling systems with standard on-center spacing (1 x 4, 2 x 2, 2 x 4). 7. MSB4 for use with grid fixtures only. 8. CLPF, CLPG with 5 LED modules in cross-section, at HI illumination level require voltage specific thermal protector. 9. 3 Circuit max for 2x2.

8 4,5,8No. of Circuits 1 = 1 Circuit2 = 2 Circuits3 = 3 Circuits 4 = 4 Circuits 4,5,8 4,5,8 5 Notes: 7 7* Red & White LEDs (5 modules max in cross-section) Rows of White Rows of Red Ilumination Level WhiteColor TempWhite Ilumination Level RedColor TempRedPlease see below for ordering logic for the application of Red & White Leds in combination 123 45123 45 STDLOHISTDLOHI202730 35 40 50 R63 Sample Number: CLPG-24-4-INS-A12125-LD4-4 STD-40-UNV-EDC1 ( White only) Sample Number: CLPF-24-4-INS-A12125-LD4-2LO30/2 LOR63-UNV-EDC2 (White/Red)Sample Number: CLPG-24-4-INS-A12125-LD4-4 LOR63-UNV-EDC1 (Red only) 2x2/2x4 LED Placement (Red/White) Placement of Red & White LEDs# Rows of Red LEDs# Total Rows of LEDs# Rows ofWhite LEDs 213211234121234321 White,Red,WhiteRed,White,RedWhite,White, Red,WhiteWhite,Red,Red,WhiteRed,Red,Whit e,RedRed,Red,White,Red,RedRed,White,Red, White,RedWhite,Red,White,Red,WhiteWhite, White,Red,White,White LUA/ES_=Lutron A-Series, 1% EcoSystem Dimming LUA/3W_=Lutron A-Series, 1% EcoSystem 3-wire Dimming Approximate Lumen Multiplier for Red LED s Color Multiplier from White 4000 KWhite, 4000K1.

9 , 630nm334445555 8,9911 CLPG-24-4-INS-A12125-LD4-3 HIR63-UNV-EDC2 (Red only) CLPG-24-4-INS-A12125-LD4-2 STD35/2 LOR63-UNV-EDC2 (White/Red)ORDERING INFORMATIONCLP - 1 X 1, 1 X 2, 1 X 4, 2 X 2, 2 X 4 PS519020EN4-23-18 Specifications and dimensions subject to change without 1121 Highway 74 SouthPeachtree City, GA 30269P: CLPS Mounting DiaPower DiaMounting Holes (4) " EKO'S for Alternate Power .312 Holes(4) Entry7/8" EKO'S forAlternatePower Entry1x4 CLPS Mounting Detail .312 Holes(4) Entry7/8" EKO'S for Alternate Power Entry2x2 CLPS Mounting Detail* Overall Fixture Depth = * Overall Fixture Depth = * Overall Fixture Depth = CLP - 1 X 1, 1 X 2, 1 X 4, 2 X 2, 2 X 4 PS519020EN4-23-18 Specifications and dimensions subject to change without 1121 Highway 74 SouthPeachtree City, GA 30269P.

10 Bracket - Standard1 Wide, Inset Door1 Wide, Overlapping Door2 Wide, Inset Door2 Wide, Overlapping Door1 Wide, Inset Door2 Wide, Inset Door2 Wide, Overlapping DoorRecessed FlangeRecessed GridCut-Out Dimensions1x4 10-3/4 x 46-3/4 1x2 10-3/4 x 22-3/4 1x1 10-3/4 x 10-3/4 2x422-3/4 x 46-3/4 2x2 22-3/4 x 22-3/4 11-3/4" [298mm]4-3/4"[121mm]8" [203mm]10-1/2" [267mm]10-3/8" [264mm]3-1/2"[89mm]11-3/4" [298mm]1 Wide, Overlapping Door10-3/8" [264mm]3-1/2"[89mm]11-3/4" [298mm]22-3/8" [568mm] 23-3/4" [603mm] 3-1/2"[89mm] 22-3/8" [568mm] 23-3/4" [603mm] 3-1/2"[89mm] 4-3/4"[121mm]8" [203mm]11-3/4" [298mm]10-1/2" [267mm]11-7/8" [302mm]20 [508mm] 23-3/4" [603mm] 22-1/2" [571mm] 4-1/4"[108mm] 20 [508mm]23-3/4" [603mm]22-1/2" [571mm]4-1/4"[108mm] 5-3/16"[132mm]5-3/16"[132mm]5-3/16"[132m m]5-3/16"[132mm] PS519020EN4-23-18 CLP - 1 X 1, 1 X 2, 1 X 4, 2 X 2, 2 X 4