FEATURES & SPECIFICATIONS Type - Acuity Brands

1 EMERGENCY EDG-EDGRC atalog NumberNotesTypeORDERING INFORMATIONFor shortest lead times, configure products using bolded : EDG 1 R ELFamilyHousing colorNumber of facesLetter colorOperationsOptionsEDG Surface mount LED edge-lit exitEDGR Recessed LED edge-lit exit(blank)Brushed aluminumW White1 Single face2 Double faceRRed on clear (single face only)1G Green on clear (single face only)1 RMRRed on mirror2 GMRG reen on mirror2 RWRed on white3 GWGreen on white3(blank)AC onlyELNickel-cadmium batteryX2 Lamp wired on two separate AC circuits (specify 120V or 277V)4 SDSelf-diagnostics5(blank)NoneWMRecessed wall mount6 Accessories: Order as separate US1212 stem kit with brushed aluminum canopy7 ELA W US1212 stem kit with white canopy7 FEATURES & SPECIFICATIONSINTENDED USE Suitable for applications requiring attractive edge-lit exit signage, universal installa-tion and low energy Extruded brushed aluminum finish.

2 Clear acrylic panels- letters measure 6 high with 3/4 stroke, with 100 ft viewing distance rating, based upon UL 924 single-face clear panels, EXIT is seen as a reversed image from the LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years. The LED operating frequency is Dual voltage input capacity (120/277V).Battery: (EL Option) Sealed, maintenance free nickel-cadmium battery delivers 90 minutes capacity to emergency lamps. Test switch provides manual activation of 30-second diagnostic testing for on-demand visual testing (EL Option Only) for 30 seconds every 30 days and 90 minutes annually. Diagnostic evaluation of LED light source, AC to DC transfer, charging and battery EDG Universal surface (top, end or back) mounting.

3 Canopy Recessed mounting. Bar hanger and brackets provided for both new or restricted ceiling access installation applications. Back wall mount (WM) directional indicators. Field selected and UL damp location listed 32 -122 F (0 -50 C) standard. Meets UL924, NFPA 101 (current Life Safety Code), NEC and OSHA illumination 5-year limited warranty. Complete warranty terms located at: : Actual performance may differ as a result of end-user environment and values are design or typical values, measured under laboratory conditions at 25 subject to change without Edge-Lit ExitsEDG EDGRLED LampsNotes1 For single-face clear panels, EXIT is seen as a reversed image from the Available with single and double White panel standard for double and single face.

4 4 Not available with EL and SD options. Both circuits can be energized at the same Available with EL option Available on EDGR single face only 7 See spec sheet ELA-StemKits. Only available for dimensions are inches (centimeters) unless otherwise (surface mount)EDGR (recessed mount)SpecificationsEDG (End Mount) EDG (Top Mount) Length: 13-5/8 ( ) Length: 13 ( )Depth: 5-1/2( ) Depth: 4-5/16 ( )Height: 11-1/8 ( ) Height: 11-3/4 ( )Shipping Weight : 4 lbs ( kgs) Shipping Weight : 4 lbs ( kgs)EDG (Back Mount) EDGR Length: 13 ( ) Length: 13 ( )Depth: 3 ( ) Depth: 1-3/4 ( )Height: 11-1/8 ( ) Height: 8 ( )Shipping Weight : 4 lbs ( kgs) Shipping Weight : lbs ( kgs) Shipping Weight (WM option) : lbs ( kgs) EDG-EDGREMERGENCY: One Lithonia Way Conyers, GA 30012 Phone: 800-334-8694 2003-2017 Acuity Brands Lighting, Inc.

5 All rights reserved. Rev. 09/21/17 SPECIFICATIONSKEY FEATURESEDG-EDGR LED, Surface and Recessed Mount Edge-Lit ExitsNotes1 Based on continuous operation. The typical life of the exit LED lamp is 10 At 77 F (25 C).3 All life safety equipment, including emergency lighting for path of egress must be maintained, serviced, and tested in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform the required maintenance, service, or testing could jeopardize the safety of occupants and will void all Optimum ambient temperature range where unit will provide capacity for 90 minutes. Higher and lower temperatures affect life and capacity. Universal chevron indicators for field Switch Pilot Light(Emergency Only)Back MountEnd MountTop Mount4-5/16( )11-3/4( )11-1/8( )13-5/8( )12-3/4( )5-1/2( )12-1/8( )3( )1/2( )11-1/8( )4-3/8( )13( )12-3/4( )3/8( )ELECTRICALP rimary CircuitTypeTypical LED life1 Supply voltageEDGEDGRI nput WattsMax WattsMax LED AC only10 LED AC only10 LED emer-gency10 LED emergency10 ( )1-3/4( )8( )EDGEDGRBAT TERY (EL option)Sealed Nickel-CadmiumShelf life2 Typical life2 Maintenance3 Optimum temperature43 years7-9 yearsnone32-12 2 F (0-50 C)14-1/2 ( ) 3-1/4 ( )2-13/16( )5-1/2( )4-1/8( )15-3/4( )8( )13( )EDGR WM optionMOUNTING