Example: dental hygienist

FLEX DC 88 Specification Sheet - Optic Arts

FLEX DC 88 Specification Sheet716 Monterey Pass Rd, Monterey Park, CA | | Arts reserves the right to modify this Specification without prior notice. Last Modified: September 18, 2019 2:00 PM Optic Arts 20181 of 13 FLEX DC 88 is a high performance flexible LED fixture suitable for use in coves, under cabinets, in shelves, and virtually anywhere alinear fixture is OUTPUTACCESSORIESI nput Voltage Dimming Options Power Consumption Wire Size Certification 24 VDC PURE DC MLV 0-10 Volts DMX Lutron (2-WIRE, 3-WIRE, EcoSystem) Watts per foot18 AWG, 2 wireETL - Conforms to UL Std. 2108; Certified to CSA Std.

FLEX DC® 88 Specification Sheet 110 R C 1 21200 customerservice@opticarts.com.o.o Optic Arts reserves the right to modify this specification without prior notice. Last Modified: July 5, 2018 8:52 AM

Tags:

  Sheet, Specification, 88 specification sheet

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Advertisement

Transcription of FLEX DC 88 Specification Sheet - Optic Arts

1 FLEX DC 88 Specification Sheet716 Monterey Pass Rd, Monterey Park, CA | | Arts reserves the right to modify this Specification without prior notice. Last Modified: September 18, 2019 2:00 PM Optic Arts 20181 of 13 FLEX DC 88 is a high performance flexible LED fixture suitable for use in coves, under cabinets, in shelves, and virtually anywhere alinear fixture is OUTPUTACCESSORIESI nput Voltage Dimming Options Power Consumption Wire Size Certification 24 VDC PURE DC MLV 0-10 Volts DMX Lutron (2-WIRE, 3-WIRE, EcoSystem) Watts per foot18 AWG, 2 wireETL - Conforms to UL Std. 2108; Certified to CSA Std.

2 No. 24 - All IP40 and White Colors are JA8 when used with 0-10V, DMX, Lutron A-Series 2-Wire or Lutron Premier dimming (Config 2 and 3 only).Field Cuttable Operating Temperature EnvironmentMaximum Class 2 Run Length Dimensions (W x H):Every -40 C (-40 F) to +70 C (+158 F)IP40 - Dry LocationIP68 - Wet LocationIP40: 10 , IP68: 10 IP40 - ( ) x ( )IP68 - ( ) x ( )IP68 Endcaps - ( ) x ( )CRIL umen MaintenanceBinning ToleranceWarranty90+50,000 Hours+/- 100K5 yearsChannelsConnectorsOptic Arts Channel (pg. 3-5)LC-I2P-M, LC-I2P-F, LC-O2P-F, LC-O2P-M (Pg. 5)Note: FLEX DC 88 must be used in conjunction with Optic Arts Channel for proper heat (IP40 only) lm/ft lm/ft lm/ft lm/ft lm/ft lm/ft lm/ft lm/WattNote: Stated lumen values have a tolerance of +/- 10%.

3 SERIES1: All IP40 and White Colors are JA8 when used with 0-10V, DMX, Lutron A-Series 2-Wire or Lutron Premier dimming (Config 2 and 3 only).+++++++COLORIP RATINGVOLTAGEWATTAGECONFIGURATIONLENGTHJ A8 PART NUMBER BUILDER20 = 2000K (IP40 only)124 = 2400K27 = 2700K30 = 3000K 35 = 3500K41 = 4100K60 = 6000KR = RedG = GreenB = BlueA = AmberFLEXDC40 = IP40 - Dry Location168 = IP68 - Wet LocationC1 = FLEX Config 1C2 = FLEX Config 21C3 = FLEX Config 31XX = Custom LengthY = YesN = No88 = = 24 VDCNote: All IP40 and White Colors are JA8 when used with 0-10V, DMX, Lutron A-Series 2-Wire or Lutron Premier dimming (Config 2 and 3 only).

4 Note: JA8 compliant products may increase order lead DC 88 Specification Sheet716 Monterey Pass Rd, Monterey Park, CA | | Arts reserves the right to modify this Specification without prior notice. Last Modified: September 18, 2019 2:00 PM Optic Arts 20182 of 13 DIMENSIONSOUTDOOR FLEX DC 88 INDOOR FLEX DC 88 OUTDOOR DIMENSIONSINDOOR DIMENSIONSW idthHeightWidth (Endcap)Height (Endcap)Max Run ( ) ( ) ( ) ( ) ( )WidthHeightCuttable Segment LengthPitch LengthMax Run ( ) ( ) ( ) ( ) ( )INDOOR FLEX DC 88 OUTDOOR FLEX DC 88 Optic Arts cuts all FLEX DC and Channel products to length per customer specifications.

5 Each length of FLEX DC is fitted with a 6 wire lead (cus-tom lengths available upon request) and packaged on a reel in an anti-static bag. Bags are labeled with fixture type, length and location (if applicable). Each piece of channel is labeled with fixture type, length and location (if applicable), and is bundled by fixture type. Due to the nature of the FLEX DC product, specific lengths may not fall exactly on a cutting point. In this case, Optic Arts will always cut to the smaller dimension unless otherwise specified. Unless otherwise specified, channel is cut 15mm longer than FLEX DC . Some on-site assembly required.

6 See installation guides for Length~ ~ Specified Length~ *Encased in siliconeFLEX DC 88 Specification Sheet716 Monterey Pass Rd, Monterey Park, CA | | Arts reserves the right to modify this Specification without prior notice. Last Modified: September 18, 2019 2:00 PM Optic Arts 20183 of 13 MOUNTING OPTIONS - COMPATIBLE CHANNELSC lick to access CHANNEL ACCESSORIES CATALOGUE >KEYCHS-R-1208 Click on channel titles below to access complete channel cut BlendedBlended withMilky LensCenter BlendCONFIGURATION:DIFFUSION LEVEL:MEDIUM CHANNELS A: ( )B: ( )C: ( )D: ( )E: ( )123 EMounting ClipBCADCH-MD-LS-SF(Previously Known As CHW-S-2010)A: ( )B: ( )C: ( )D: ( )12CH-MD-LS-RE(Previously Known As CHW-R-2010)BCADA: ( )B: ( )C.

7 ( )BCACH-MD-TL-SF123 EndcapEndcap w/holeMounting ClipRotating Mounting ClipMATERIALDESCRIPTIONLENGTHACCESSORIES M edium - Lite - Surface - Aluminum7 TYPESC learFrostedMilkyCH-MD-LN-FL-CCCH-MD-LN-F L-CF CH-MD-LN-FL-CMEndcapEndcap w/holeMounting ClipRotating Mounting ClipMATERIALDESCRIPTIONLENGTHACCESSORIES M edium - Lite - Recessed - Aluminum7 TYPESC learFrostedMilkyCH-MD-LN-FL-CCCH-MD-LN-F L-CF CH-MD-LN-FL-CMEndcapEndcap w/holeMounting ClipRotating Mounting ClipPendantMATERIALDESCRIPTIONLENGTHACCE SSORIESM edium - Tall - Surface - Aluminum7 TYPESC learFrostedMilkyCH-MD-LN-FL-CCCH-MD-LN-F L-CF CH-MD-LN-FL-CM Configuration 1 Configuration 2 Configuration 3123 Configuration 1 withAuxiliary Housing Accessory1aSee page 8 for Flex Connect Auxiliary Housing AccessoriesMEDIUM CHANNEL PART NUMBER BREAKDOWN.

8 +++++CHANNEL CHANNEL SIZE CHANNEL TYPE MOUNTINGLENS TYPELENS DIFFUSIONCH-MD = Channel MediumLS = Legacy ShortTL = Tall1SF = SurfaceRE = Recessed2NA = Direct SurfaceMC = Mounting Clip4RC = Rotating Clip4PD = Pendant4, 5FL = FlatCC = ClearCF = FrostedCM = MilkyStandard FinishSS = Satin Silver AnodizedPowder Coat FinishesBK = Matte Black - TIGER 061/8007 3BZ = Bronze - TIGER 061/68002 3WT = White - Cardinal T009-WH1113 Special Powder Coat FinishesGrey - P008-GR16 3 Blue - T009-BL01 3 Red - T009-RD03 3 Yellow - T009-YL01 3 Chrome 3CR = Custom RAL # 3 FINISH3: Powder coat fi nishes may increase order lead time and incur an added : Not compatible withrecessed options 5: Not available with Lite option.

9 2: Not available for tall : Only available in surface channel DC 88 Specification Sheet716 Monterey Pass Rd, Monterey Park, CA | | Arts reserves the right to modify this Specification without prior notice. Last Modified: September 18, 2019 2:00 PM Optic Arts 20184 of 13 CORNER CHANNELS A: ( )B: ( )C: ( )D: ( )E: ( )ClearFrostedMilkyEndcapEndcap w/holeMounting ClipMATERIALDESCRIPTIONLENGTHACCESSORIES 45 degree channel with rounded Aluminum2 meterCHW-C-3030-CCCHW-C-3030-CFCHW-C-303 0-CMCHW-C-3030-ECCHW-C-3030-ECHCHW-C-303 0-MCLENS TYPESBCADEM ounting ClipCHW-C-3030 A: ( )B: ( )C: ( )D: ( )E.

10 ( )ClearFrostedMilkyEndcapEndcap w/holeMounting ClipMATERIALDESCRIPTIONLENGTHACCESSORIES 45 degree channel with square Aluminum2 meterCHW-C-3030S-CCCHW-C-3030S-CFCHW-C-3 030S-CMCHW-C-3030S-ECCHW-C-3030S-ECHCHW- C-3030S-MCLENS TYPESCHW-C-3030 SBCADEM ounting Clip123 A: ( )B: ( )C: ( )D: ( )MilkyEndcapEnd Cap w/holeHanging HardwareBracket StraightBracket 90 FlatBracket 90 RaisedMATERIALDESCRIPTIONLENGTHACCESSORI ESL arge surface mounted or hanging channel with wrap around Aluminum2 meterCHW-SH-3561-CMCHW-SH-3561-ECCHW-SH- 3561-ECHCHW-SH-MWCHW-SH-BSCHW-SH-B90 FCHW-SH-B90 RLENS TYPES* Must specify for hanging or surface mount CHANNELS A: ( )B: ( )C: ( )MilkyEndcapEndcap w/holeMounting Clip MATERIALDESCRIPTIONLENGTHACCESSORIESSlim surface mounted channel with rounded wrap around lens.


Related search queries