Fluke 19xC-2x5C

1 4822 872 30805 July 2008, Rev. 1, 09/2009 2008, 2009 Fluke Corporation. All rights reserved. All product names are trademarks of their respective companies. Fluke 19xC-2x5C ScopeMeter Software version onwards Users Manual LIMITED WARRANTY & LIMITATION OF LIABILITY Each Fluke product is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is three years for the test tool and one year for its accessories. The warranty period begins on the date of shipment. Parts, product repairs and services are warranted for 90 days. This warranty extends only to the original buyer or end-user customer of a Fluke authorized reseller, and does not apply to fuses, disposable batteries or to any product which, in Fluke 's opinion, has been misused, altered, neglected or damaged by accident or abnormal conditions of operation or handling. Fluke warrants that software will operate substantially in accordance with its functional specifications for 90 days and that it has been properly recorded on non-defective media.

2 Fluke does not warrant that software will be error free or operate without interruption. Fluke authorized resellers shall extend this warranty on new and unused products to end-user customers only but have no authority to extend a greater or different warranty on behalf of Fluke . Warranty support is available if product is purchased through a Fluke authorized sales outlet or Buyer has paid the applicable international price. Fluke reserves the right to invoice Buyer for importation costs of repair/replacement parts when product purchased in one country is submitted for repair in another country. Fluke 's warranty obligation is limited, at Fluke 's option, to refund of the purchase price, free of charge repair, or replacement of a defective product which is returned to a Fluke authorized service center within the warranty period. To obtain warranty service, contact your nearest Fluke authorized service center or send the product, with a description of the difficulty, postage and insurance prepaid (FOB Destination), to the nearest Fluke authorized service center.

3 Fluke assumes no risk for damage in transit. Following warranty repair, the product will be returned to Buyer, transportation prepaid (FOB Destination). If Fluke determines that the failure was caused by misuse, alteration, accident or abnormal condition of operation or handling, Fluke will provide an estimate of repair costs and obtain authorization before commencing the work. Following repair, the product will be returned to the Buyer transportation prepaid and the Buyer will be billed for the repair and return transportation charges (FOB Shipping Point). THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Fluke SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, WHETHER ARISING FROM BREACH OF WARRANTY OR BASED ON CONTRACT, TORT, RELIANCE OR ANY OTHER THEORY.

4 Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or limitation of incidental or consequential damages, the limitations and exclusions of this warranty may not apply to every buyer. If any provision of this Warranty is held invalid or unenforceable by a court of competent jurisdiction, such holding will not affect the validity or enforceability of any other provision. Fluke Corporation, Box 9090, Everett, WA 98206-9090 USA, or Fluke Industrial , Box 90, 7600 AB, Almelo, The Netherlands SERVICE CENTERS To locate an authorized service center, visit us on the World Wide Web: or call Fluke using any of the phone numbers listed below: +1-888-993-5853 in and Canada +31-40-2675200 in Europe +1-425-446-5500 from other countries i Table of Contents Chapter Title Page Unpacking the Test Tool 0-2 Safety Information: Read 0-4 1 Using The 1-7 Powering the Test Tool.

5 1-7 Resetting the Test 1-8 Navigating a 1-9 Hiding Key Labels and 1-10 Input Connections .. 1-10 Making Scope Connections .. 1-11 Displaying an Unknown Signal with Connect-and-View .. 1-12 Making Automatic Scope 1-13 Freezing the 1-14 Using Average, Persistence and Glitch Capture .. 1-15 Acquiring Waveforms .. 1-18 Pass - Fail Testing .. 1-24 Analyzing Waveforms .. 1-25 Fluke 19xC-2x5C Users Manual ii 2 Using The Multimeter .. 2-27 Making Meter 2-27 Making Multimeter 2-28 Freezing the 2-31 Selecting Auto/Manual 2-31 Making Relative 2-32 3 Using The Recorder Functions .. 3-33 Opening the Recorder Main 3-33 Plotting Measurements Over Time (TrendPlot ) .. 3-34 Recording Scope Waveforms In Deep Memory (Scope Record) .. 3-37 Analyzing a TrendPlot or Scope Record .. 3-40 4 Using Replay, Zoom and Cursors .. 4-41 Replaying the 100 Most Recent Scope 4-41 Zooming in on a 4-44 Making Cursor 4-46 5 Triggering on Waveforms.

6 5-51 Setting Trigger Level and 5-52 Using Trigger Delay or Pre-trigger .. 5-53 Automatic Trigger 5-54 Triggering on Edges .. 5-55 Triggering on External 5-58 Triggering on Video 5-59 Triggering on Pulses .. 5-61 Contents (continued) iii 6 Using The Bushealth Function .. 6-65 Bushealth Function 6-65 Introduction .. 6-65 Performing Bushealth Measurements .. 6-66 Reading the Screen .. 6-68 Input Connections and Tested 6-70 Viewing the Bus Waveform 6-80 Setting the Test Limits .. 6-81 Saving and Recalling Test 6-82 7 Using Memory, PC and Printer .. 7-83 Saving and Recalling .. 7-83 Documenting 7-88 8 Tips .. 8-91 Using the Standard 8-91 Using the Independently Floating Isolated Inputs .. 8-93 Using the Tilt 8-95 Resetting the Test 8-95 Suppressing Key Labels and Menu 8-95 Changing the Information 8-96 Adjusting the Contrast and Brightness.

7 8-96 Changing the Display 8-97 Changing Date and Time .. 8-97 Saving Battery 8-98 Changing the Auto Set 8-99 9 Maintaining the Test 9-101 Fluke 19xC-2x5C Users Manual iv Cleaning the Test 9-101 Storing the Test Tool .. 9-101 Charging the Batteries .. 9-102 Extending Battery Operation 9-103 Replacing the NiMH Battery Pack BP190 .. 9-104 Calibrating the Voltage 9-104 Displaying Calibration 9-106 Parts and Accessories .. 9-106 Troubleshooting .. 9-111 10 Specifications .. 10-113 Introduction .. 10-113 Dual Input 10-114 Automatic Scope 10-116 Meter .. 10-120 DMM Measurements on Meter 10-120 10-122 Zoom, Replay and 10-123 Fieldbus Bushealth .. 10-123 10-124 10-125 10-126 10:1 10-127 Electromagnetic 10-129 Appendices Contents (continued) v A Bushealth A-1 Unpacking the Test Tool Kit 1 Declaration of Conformity for Fluke 192C - 196C - 199C 215C 225C ScopeMeter test tools Manufacturer Fluke Industrial Lelyweg 14 7602 EA Almelo The Netherlands Statement of Conformity Based on test results using appropriate standards, the product is in conformity with Electromagnetic Compatibility Directive 2004/108/EC Low Voltage Directive 2006/95/EC Sample tests Standards used: EN.

8 2001 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use EN61326-1:2006 Electrical equipment for measurements and laboratory use -EMC requirements- The tests have been performed in a typical configuration. This Conformity is indicated by the symbol , Conformit Europ enne . Fluke 19xC-2x5C Users Manual 2 Unpacking the Test Tool Kit The following items are included in your test tool kit: Note When new, the rechargeable NiMH battery is not fully charged. See Chapter 9. 431278111095(2x)(2x)(2x)de(2x)b(2x)a(2x) c6 Fluke 215C/225CS-version Figure 1. ScopeMeter Test Tool Kit Unpacking the Test Tool Kit 3 # Description 1 ScopeMeter Test Tool 2 Battery Charger (country dependent) 3 10:1 Voltage Probe Set (red) a) 10:1 Voltage Probe (red) b) Hook Clip for Probe Tip (red) c) Ground Lead with Mini Alligator Clip (black) d) Ground Spring for Probe Tip (black) e) Insulation Sleeve (red) 4 10:1 Voltage Probe Set (gray) a) 10.

9 1 Voltage Probe (gray) b) Hook Clip for Probe Tip (gray) c) Ground Lead with Mini Alligator Clip (black) d) Ground Spring for Probe Tip (black) e) Insulation Sleeve (grey) 5 Test Lead Set 6 BHT190 Bus Health Test adapter ( 2x5c only) 7 Safety Information + CD ROM with Users Manual (multi-language) 8 Shipment box (basic version only) Fluke 19xc and 2x5c -S versions include also the following items: # Description 9 Optically Isolated USB Adapter/Cable 10 FlukeView ScopeMeter Software for Windows 11 Hard Case Fluke 19xC-2x5C Users Manual 4 Safety Information: Read First Carefully read the following safety information before using the test tool. Specific warning and caution statements, where they apply, appear throughout the manual. A Warning identifies conditions and actions that pose hazard(s) to the user. A Caution identifies conditions and actions that may damage the test tool.

10 The following international symbols are used on the test tool and in this manual: See explanation in manual Double Insulation (Protection Class) Safety Approval Earth ground Recycling information Conformit Europ enne Direct Current Alternating Current Do not dispose of this product as unsorted municipal waste. Go to Fluke 's website for recycling information. Warning To avoid electrical shock or fire: Use only the Fluke power supply, Model BC190 (Battery Charger / Power Adapter). Before use check that the selected/indicated range on the BC190 matches the local line power voltage and frequency. For the BC190/808 universal Battery Charger / Power Adapter) only use line cords that comply with the local safety regulations. Note: To accomodate connection to various line power sockets, the BC190/808 universal Battery Charger / Power Adapter is equipped with a male plug that must be connected to a line cord appropriate for local use.